Tender For Supply, Installation, Testing & Commissioning Of Five Layer Dryer (Up To 130 Kgph) Conveyorized Belt Horizontal Layers

Sharing tender

Tender for Supply, Installation, Testing & Commissioning Of Five Layer Dryer (Up To 130 Kgph) Conveyorized Belt Horizontal Layers , Supply, Installation, Testing & Commissioning Of Five Layer Dryer (Up To 130 Kgph) Conveyorized Belt Horizontal Layers As Per Details Given In Bid Document , Five Layer Dryer (Up To 130 Kg Per Hr) Conveyorized Belt Horizontal Layers- • Machine Type: Five Layer Conveyorized Belt Dryer With Horizontal Layer Arrangement • Drying Capacity: Up To 130 Kg/Hour, Depending On Product, Initial/Final Moisture And Drying Temperature • Number Of Layers: Minimum 5 Horizontal Drying Layers • Conveyor/Belt: Food-Grade, Heat-Resistant Conveyor Belt; Suitable For Continuous Drying Operation • Belt Width: Minimum 1000 Mm Or Suitable For Achieving Rated Capacity • Construction: Heavy-Duty Ms/Ss Fabricated Structure With Corrosion-Resistant Finish • Product Contact Parts: Ss 304 Food-Grade Material • Drying Chamber: Properly Insulated Multi-Layer Drying Chamber With Minimum Heat Loss • Heating System: Electric / Hot-Air Heating System, Suitable For Continuous Operation And Uniform Drying • Hot Air Circulation: Forced Hot-Air Circulation With Centrifugal/Blower Arrangement For Uniform Temperature Across All Five Layers • Temperature Control: Digital Pid Temperature Controller With Adjustable Temperature Setting And Automatic Temperature Regulation • Temperature Range: Preferably Ambient +10°C To Minimum 120°C, Or Suitable For The Intended Agricultural/Food Products • Air Flow: Adjustable/Controlled Hot-Air Circulation With Provision For Uniform Airflow Through All Drying Layers • Moisture Removal: Provision For Controlled Exhaust/Ventilation Of Moisture-Laden Air • Conveyor Speed: Variable Speed Control Through Vfd, Suitable For Controlling Residence/Drying Time • Drive System: Heavy-Duty Geared Motor/Gearbox With Suitable Power Rating For Continuous Operation • Electrical Panel: Fully Wired Control Panel With Mcb/Mccb, Contactors, Overload Protection, Temperature Controller, Vfd And Necessary Controls • Safety: Emergency Stop, Overload Protection, Over-Temperature Protection And Electrical Safety Provisions • Insulation: High-Quality Thermal Insulation To Minimize Heat Loss And Improve Energy Efficiency • Loading/Unloading: Continuous Loading And Discharge Arrangement Suitable For Conveyorized Operation • Drying Uniformity: System Shall Ensure Uniform Drying Across All Five Layers Through Controlled Airflow And Temperature • Cleaning & Maintenance: Easy-Access Inspection/Cleaning Arrangement; Removable/Openable Sections Wherever Required • Operating Mode: Continuous Operation With Automatic/Semiautomatic Control Power Supply: 415 V, 3 Phase, 50 Hz Ac, With Suitable Connected Electrical Load , Inspection Conveyor Belt- • Conveyor Belt In Sanitary Food Grade Mate. • Belt Is Supported Completely On Rollers. • Both Side Platforms Made Out Of Ss 304 Sq Pipes • All Drives & Non-Drive Rollers Are Rubber Lined. • Completely Made In Ss 304. , Bubble Washer (Continuous Type)- • Capacity: Minimum 2000 Kg/Hour • Suitable For Fruit Of All Type • Conveyor Speed: Minimum 3-11 Meter/Min Air Bubbles Are Created To Clean The Vegetables. • High Pressure Blower Of Aluminum Body Mounted On S.S Frame. Air Bubble Washing Avoids Collision / Friction Damages Of Vegetables • Water Pump To Create Turbulence Action To Push Forward The Vegetables To Elevator. • Fresh Water Is Spread On Vegetables From Top And Bottom Of P.P Belt To Clean The Vegetables. • Moc: - S.S 304 • Installed Power Shall Be Minimum 3.7 Kw , Cull Belt Conveyor- • Capacity: Minimum 2000 Kg/Hr • Moc - Ss 304 , Air Dryer Machine- • Capacity: Minimum 2000 Kg/Hr • Air Knife To Effectively Remove Surface Moisture Or Debris • Moc: Ss 304 , Hot Air Dryer Conveyor- • Capacity: Minimum 2000 Kg/Hr • Remove Moisture From Bulk Products Using Heated Air. • Moc - Ss 304 , Ss Tables- • Moc - Ss 304 , Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Training- Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Trial Run Shall Be Included. Training For Operators Shall Be Provided. Operation & Maintenance Manual Should Be Provided.