Tender For Construction Of Vrdl Lab At Pt. Jlnmc & Hospital ( Govt. Millennium Polytechnic Chamba ) At Sarol (Sh:- Providing And Fixing Aluminium Door , Window And Signage )
Tender Value
10.69 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
21384
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Vrdl Lab At Pt. Jlnmc & Hospital ( Govt. Millennium Polytechnic Chamba ) At Sarol (Sh:- Providing And Fixing Aluminium Door , Window And Signage )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing coloured anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15 ( fifteen) sub and glazed partitions frame work for door,windows and ventilators of section no 19624 of Jindal/Hindalco with extruded built up standard tubular sectionsr fixed with dash fastener of required dia and size (Dash fastener to be paid for separately)as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government . |
| 2 | Providing and fixing coloured coated/ anodised aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections No. 19509 , 19596 , 19584 , 19377 of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285 section fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government. |
| 3 | Providing and fixing Glazing with glass panes of 5mm ( Five milimetre) thick plain glass weight not less than 12.50Kg/M2 (twelve point five zero Kilogramme per square metre) of Modiguard / Saint Gobian for shutters with EPDM rubber/neoprene gasket etcetra complete, as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 4 | Providing and fixing 12mm (Twelve milimetres) thick (both Side) prelaminated water proof MDF board of green ply (exterior grade) in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 of greenply approved shade Grade l Type ll, in panelling fixed in aluminium doors, window shutter and partitions frame with CPbrass/stainless screws etcetra complete (aluminium work to be paid dor seprately as per architectural drawings and directions of Engineer-in-Charge including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government. |
| 5 | Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5mm (zero decimal five millimetre) diametre wire and 1.4mm (one decimal four millimetre) wide aperture with for aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of Engineer- In-Charge. (Cost of aluminium snap beading shall be paid in basic item) complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government. |
| 6 | Providing and fixing steel roller for Aluminium sliding window with necessary screws etc. complete )including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 7 | Providing and fixing steel roller for Aluminium sliding door with necessary screws etc. complete )including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 8 | Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 150 X 10 mm (one hundred fifty into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 9 | Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 10 | Providing and fixing Aluminium. sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 300 X 16 mm (three hundred into sixteen millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 11 | Providing and fixing aluminium hanging single floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government. |
| 12 | Providing and fixing 65x35mm (Sixty five into Thirty five millimetre) special quality chromium plated brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality)including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 13 | Providing and fixing of sign board on Aluminium composite panel and Vinyl pasted including printing ,posting etc . 0.60 x 1.80 mtr. ( point sixty isto one point eighty metre) size as per material approved and attached .)including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender