Tender For Repair/Renovation To Various Residential Buildings Under Division No.-03, Shimla (Sh:- Balance Work Annexe Block In Benmore Section Under Sub Division Benmore)
Tender Value
16.04 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
32090
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation To Various Residential Buildings Under Division No.-03, Shimla (Sh:- Balance Work Annexe Block In Benmore Section Under Sub Division Benmore)
BOQ
| Sl. No. | Item Description |
| 1 | Wall painting two or more coats on new work with plastic emulsion of approved brand and manufacture on undecorated wall surfaces including priming coat to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth as required for making the surface including carriage of material within all leads and lifts.in all floor levels as per direction of Engineer-in-charge. |
| 2 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat) applied @ 1.67 Itr/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) on undecorated wall surfaces to give an even shade including priming coat and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge. |
| 3 | Polishing two coats with Melamine finish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust, and sand papered smooth and including a coat of wood filler complete including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge. |
| 4 | Providing and fixing Brass Handles anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary 4 screws etc. complete including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge. (i) 125mm |
| 5 | Providing and laying heavy duty precast cement conrete polished NTC make inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 40mm thick average thickness of cement mortar 1:4 (1 cement: 4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub- base concrete floor to be paid for seperately 60mm thick inter locking blocks including carriage of materials within all leads and lifts. |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window silis, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement: 3 coarse sand): 6 graded 6 stone aggregate 20 mm nominal size) |
| 7 | Providing & Fixing 120 CM BLIND WITH ADJACENT SHELF HT. 72 CM, 30 CM ВРО HT. 72 CM (BOTTLE PULL OUT), 120 CM SINK UNIT HT. 72 CM(AUTOLID BIN), 120 CM BLIND WITH S. CORNER HT. 72 CM(S CORNER), 80 CM 2 PAN DRAWERS HT. 72 CM (HETTICH DRAWER), 90 CM PVC CUTTLERY TRAY WITH 2 PAN DRAWERS HT. 72 CM (2 SMALL AND 1 POT & PAN WITH CUTLAERY 1 PCS.), 60 CM GRAIN TROLLY HT 72 CM (GRAIN TROLLY), 60 CM RICE TROLLY HT 72 CM (RICE TROLLY), 120 CM BLIND WITH ADJ. SHEET HT 72 CM, 70 CM OPEN SHELF HT 60 CM, 90 CM G.T.P.T HT 60 CM,90 CM ADJ SHELF HT. 60 CM (HINGES DOOR) including carriage of materials within all leads and lifts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender