Tender For General-Thenmala-Ms2-Action Plan Works-Kip-Rbmc-Patch Work, Painting, Replacement Of Wire Rope & Overhauling Of Hoisting Mechanism For Escape Shutter At Ch-5600M Of Vallikkunnam Distributory-General Mechanical Work
Tender Value
1.66 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
4164
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Thenmala-Ms2-Action Plan Works-Kip-Rbmc-Patch Work, Painting, Replacement Of Wire Rope & Overhauling Of Hoisting Mechanism For Escape Shutter At Ch-5600M Of Vallikkunnam Distributory-General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old damaged shutter, embedded parts which need Pathwork and its hoisting mechanism- Supply Fabrication erection of new embedded parts and allied civil work etc. |
| 2 | OD19072/2022-2023:Taking out of shutter from the grooves after dissembling from the hoisting mechanism and placing safely on nearby suitable place not more than 50m from the site, then hooking it back into grooves after completing works on embedded parts as per direction of deptl officer at site including cost of all labour, conveyance charges, all lead and lift etc |
| 3 | OD19073/2022-2023:Providing temporary platform for demolishing existing civil structure, concreting and plastering includingcost of all materials, labours etc. complete TEMPORARY PLATFORM [40 times usage as life period(assumed) for these materials, hence cost for 1 time used] |
| 4 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | OD22946/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 6 | OD22945/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 7 | OD22944/2022-2023:Supply of MS round bar including cost of conveyance charges |
| 8 | OD19074/2022-2023:Fabrication and erection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories asper approved specifications, drawings and directions of deptl fficer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of materialalready supplied |
| 9 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 10 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 13 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 14 | Patchwork & Painting at shutter , Hoisting units,Ladder etc. |
| 15 | OD22948/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 16 | OD22947/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 17 | OD17888/2026-2027:Supply of G.I pipes 40 mm dia |
| 18 | OD19071/2022-2023:Patchwork of mechanical structures and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied |
| 19 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 20 | OD19941/2026-2027:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied |
| 21 | overhauling of rollers and hoisting mechanism, supply and fixing of wire rope and conducting trail run etc. |
| 22 | OD19075/2022-2023:Overhauling the thrust rollers including remove, recondition, refitting etc includingcost of all materials, machinery, labour, all lift and lead, incidental and conveyance charges etc. complete. |
| 23 | OD19076/2022-2023:Reconditioning of the Worm and pinion reduction gear box unit connected to the bull gear train mechanism and reconditioning of damaged teeth of worm and pinion, and Overhauling the rope drive hoist unit, wire rope drum with ,lubrication consumables, fasteners, oil seal, labour, conveyance of materials, tools etc. |
| 24 | OD19077/2022-2023:Supply 12mm galvanized tested quality fiber core steel wire rope 6/36 construction confirming to IS 2266. |
| 25 | OD17929/2026-2027:Supply the MS Bolt and nut |
| 26 | OD19078/2022-2023:Fixing wire rope already supplied with D shackle, wire rope clamp etc. after applying cardium compound to wire rope and hoisting unit safely |
| 27 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 28 | OD19079/2022-2023:Trial run the gate with its hoisting mechanism etc. including cost of all materials,machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction ofdepartmental officers in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender