Tender For Repair Of Existing Road By Using Paver Block From The House Of Keshab Barman To Pump House And Adhir Ray Via Vivekananda Barman To Sumitra Barman And Sudhanshu Pramanik Via Kaushik Paul To Shamoli Tamang And Kaushik Paul To Kaml Barman And
Tender Overview
Project Description
Tender for Repair Of Existing Road By Using Paver Block From The House Of Keshab Barman To Pump House And Adhir Ray Via Vivekananda Barman To Sumitra Barman And Sudhanshu Pramanik Via Kaushik Paul To Shamoli Tamang And Kaushik Paul To Kaml Barman And Tanmay Roy To Biswajit Roy In Ward No-10, Within Mathabhanga Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 &2200).8A PCC Grade M15 |
| 2 | By Mix in Place Method Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desireddensity, complete as per clause 401Rate per cum for grading-III Material |
| 3 | Supplying and Laying in the particular pattern of cement concrete block pavements with BIS certification and spacer nib of size and shape with aspect ratio as per IS 15658 with cement concrete grade not less than M40 on the prepared base course of specified CBR as mentioned in design and drawing with a cushion of bedding sand of 30 to 50 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps between two paver block with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2) complete as per IRC SP - 63 with proper confinement of bedding and joint filling sand, compaction,levelling and filling up of the edge gaps with mortar. Type I, II,III, IV should be as per design requeirment or instruction of E-I-C. a) Type - I (60 mm thickness) inter locking systemc) Type - III (80 mm thickness) inter locking system |
| 4 | Printing New Letter and Figures of any Shade for English/ Local/Regional Language may be used.Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade (Reference to MORT&H's specification 801).Hindi/Local ( Matras commas and the like not to be measured and paid for Half letter shall becounted as half ) |
| 5 | Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). |
| 6 | GST-18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender