Tender for Advertised Rate List/ Bill of Quantities for Stage Contract (2026-27) for Maintenance of Roads and Bridges (p/l Reinforced Cement Concrete Pipes/clearance of Drains, Repair/renovation of Drains, Rb/walls, Slip Clearance, Markings With Retr
Tender Value
5 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
10000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertised Rate List/ Bill of Quantities for Stage Contract (2026-27) for Maintenance of Roads and Bridges (p/l Reinforced Cement Concrete Pipes/clearance of Drains, Repair/renovation of Drains, Rb/walls, Slip Clearance, Markings With Retr
BOQ
| Sl. No. | Item Description |
| 1 | Slip Clearance in ordinary soils incl disposal upto all leads and lifts by manual/mechanical transport. |
| 2 | Slip Clearance in soils mixed with moorum/ Kankar/ shingle/ boulders incl disposal upto all leads and lifts by manual/mechanical transport. |
| 3 | Slip Clearance in soils mixed with Decomposed Rocks; by blasting or any other means incl disposal upto all leads and lifts by manual/mechanical transport. |
| 4 | Clearence of Silt/malba from surface drains, Culverts, waterways etc including disposal of the same upto all leads as per directions in wet condition |
| 5 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, as directed by enginee-All kinds of soil |
| 6 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m,including getting out excavated earth and disposal of surplus excavated earth in all kinds of soil |
| 7 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 8 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil) |
| 9 | Supply and laying of dry stone soling (hand packed) in foundation trenches and ramming, including all leads, lifts cost and carriage of materials involved complete. |
| 10 | Supply and filling of RBM /Nallah Muck/Stone soling of specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete |
| 11 | Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete ( for Berm) |
| 12 | Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. 9'' dia |
| 13 | 12'' dia |
| 14 | 16'' dia |
| 15 | 18'' dia |
| 16 | 20'' dia |
| 17 | 24'' dia |
| 18 | 28'' dia |
| 19 | 32'' dia |
| 20 | 36'' dia |
| 21 | Providing / laying of MS Pipes Medium Duty in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. 6'' dia |
| 22 | 8'' dia |
| 23 | 10'' dia |
| 24 | 12'' dia |
| 25 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. |
| 26 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate) 20mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. |
| 27 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 2: 4 (1 cement: 2 coarse sand: 4 graded stone aggregate) 20mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. |
| 28 | Providing & laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing,reinforcemet. All work up to plinth level in 1: 2: 4 (1 cement: 2coarse sand: 4 graded stone aggregate) 20mm nominal size Crushed, including all leads, lifts costs and carriages of materials upto site of work complete. |
| 29 | Providing & laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to V- level in 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate) 20mm nominal size Crushed, including all carriages of material involved upto site of work |
| 30 | P/L 50mm thick Cement concrete coping with cement conc. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size with all leads lifts cost & carriages of materials involved upto site of work complete. |
| 31 | Supply & Filling of Khak Bajri / Quarry Muck for back filling behind Crates/ R Walls including ramming, dressing, consolidation etc with all leads, lifts, cost & carriages by mechinical transport of materials involved upto site of work complete |
| 32 | Supply & Filling of 2nd class stones/ Nallah Boulders for back filling behind abuts including ramming, dressing, consolidation etc with all leads, lifts, cost & carriages of involved materials upto site of work complete |
| 33 | P/L 50mm thick Cement concrete flooring 1: 2: 4 (1 cement: 2 course sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry but, excluding the cost of nosing of steps etc. complete with 20mm nominal size stone aggregate (Crushed), including all carriages complete. |
| 34 | P/L 25mm thick Cement concrete flooring 1: 2: 4 (1 cement: 2 course sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry but, excluding the cost of nosing of steps etc complete with 20mm nominal size stone aggregate (Crushed), including all carriages complete. |
| 35 | Reinforcement for R.C.C work, including straightening, cutting, bending, placing in position and binding all complete with Thermo-mechnically treated bars of grade Fe-500 or more, including all carriages of material involved upto site of work complete |
| 36 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including all leads, lifts, costs & carriages of materials upto site of work complete |
| 37 | Structural Steel work welded in built up sections / framed work (angle iron, Flate iron, Gusset plates, chanells etc) including cutting, hoisting, fixing in position angle iron/ flat iron and including Painting of two or more coats including primining coat of red oxide including all leads, lifts, costs & carriages of materials upto site of work complete |
| 38 | Providing and fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective and reflectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti-rust and anti-theft steel to be installed as per direction of Engineer-in-charge. |
| 39 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work. including all carriages of material upto site of work complete. |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new wood work and wood based surfaces. including all carriages of material upto site of work complete. |
| 41 | Finishing walls with Textured exterior Excel paint of approved brand and manufacture to give an even shade with two or more coats on new work with priming coat and repairing of scratches by applying wall putty for exterior work. including all carriages of material upto site of work complete. & scafolding charges complete. |
| 42 | White washing with lime to give an even shade on new work(Three or more coats) to parapets,Guide stones,Tree Trunks etc incld cost and carriage complete. |
| 43 | Lettering with black Japan paint of approved brand and manufacture |
| 44 | Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-in charge |
| 45 | Dismentalling of Reinforced cement concrete and stacking of serviceable materials (Steel) and disposal of unserviceable material beyond site as per directions of engineer incharge at site. |
| 46 | Demolishing of cement concrete including disposal of unserviceable material beyond site as per directions of engineer incharge at site. |
| 47 | Dismantelling/ demolishing of stone masonary including disposal of same including stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer incharge at site. (Dismentalled/ serviceabale materials to be reused at site of work) |
| 48 | Dismantelling/ demolishing of Brick masonary including disposal of same including stacking of serviceable material with removing of mortor from serviceable bricks and disposal of unserviceable material as per the directions of Engineer incharge at site. (Dismentalled/ serviceabale materials to be reused at site of work) |
| 49 | Providing & Fixing of flex banner of any size including writing and monogram including frame work complete . |
| 50 | Providing & laying Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Dark shade using ordinary cement with cariages of alll involved materials. |
| 51 | Providing/ Fixing of acrylic board 5mm thick including letter writing with logo of approved shape , size & design duly approved by engineer incharge. including plywood sheet base of (3x2'-0'') and acrylic board of (3'x2') with all accessories like ribbon, sessor, curtain, decoration as per requirement. All inclusive with cost of labour, material & carriages of all involved materials upto site of work complete job (Work to be carried out as per directions of Engineer incharge) for inaugration purpose |
| 52 | Providing/ Fixing of granite stone board 18mm thick including letter writing with logo of approved shape , size & design of size (3'x2') duly approved by engineer incharge with all accessories like ribbon, sessor, curtain, decoration as per requirement. All inclusive with cost of labour, material & carriages of all involved materials upto site of work complete job (Work to be carried out as per directions of Engineer incharge) for inaugration purpose |
| 53 | Providing and laying 50mm thick interlocked cement concrete tiles of approved quality Rubber moulded (anti skid) for path of required shape,size,colour laid over a bed of 50mm thick sand cousion over a bed of 75mm thick lean concrete in 1:4:8 mix laid over 100mm thick stone soling including cost of cement concrete side blocks of 12\\" x 6\\" size laid in cement concrete 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate) including polishing,cleaning of Tiles. All inclusive with labour, cost & carriage of all involved materials complete job. |
| 54 | Random rubble masonry with hard stone from quarry in foundation and plinth in cement mortar 1:6 (1cement : 6 course sand), including leveling up with cement concrete 1:6:12 (1cement: 6 course sand: 12 graded stone aggregate 20mm nominal size) at plinth level with all leads lifts cost & carriages of materials involved upto site of work complete |
| 55 | Dry Random Rubble masonry in foundation and plinth using quarry stones with bond stones all leads lifts cost & carriages of materials involved upto site of work complete. |
| 56 | Supply & filling of 2nd class stones into wire crates with wire of 4mm dia anealed wire including hand packing tightly with tipping and tightening of crates with cost of crates. All inclusive with cost, labour & carriage of all involved materials complete job (Including cost of crates). |
| 57 | Preparation of sub-grade by excavating earth to an average of 22.5 Cm depth, dressing to Camber and consolidation with road roller including making good the undulation etc. and disposal of surplus earth upto 50 Mtrs. |
| 58 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). |
| 59 | Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 60 | Supply, stacking and laying non macdam type solling including applying of binding material (khak bajri/ Moorum) as per requirement including sorting, spreading to template & consolidation with Power Road Roller of 8-10 Tonne capacity to specified levels grades and cross sections including all cost & carriages of materials upto site of work complete job |
| 61 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriage of Quarry Crushed stone aggrregate All inclusive with costs & carriages of all involved materials upto site of work (Compacted quantity after deduction of voids) |
| 62 | Supply, stacking & spreading of 63mm to 45mm size stone aggregate. (Quary Crushed) Including applying stone screening of 13.20 mm size @16% & binding material @ 8% of total quantity including consolidation with Power Road Roller with 8-10 Tonne capacity to required gradient and camber. Complete job as per relevant clause of MORTH specification including scarifying of damaged road surface to Geometrical size. All inclusive with costs & carriages of all involved materials upto site of work (Compacted quantity after deduction of voids) |
| 63 | Supply, stacking & spreading of 53mm to 22.40mm size stone aggregate. (Quary Crushed) Including applying stone screening of 11.20 mm size @18% & binding material @ 8% of total quantity including consolidation with Power Road Roller with 8-10 Tonne capacity to required gradient and camber. Complete job as per relevant clause of MORTH specification including scarifying of damaged road surface to Geometrical size. All inclusive with costs & carriages of all involved materials upto site of work (Compacted quantity after deduction of voids) |
| 64 | Providing & laying, spreading and compacting graded stone agg. to wet mix macadam specifications including pre-mixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site of work, laying in uniform layers with paver in Sub-base/ base course including surface corrections compacting with roller of 8-10 tone capacity to achieve the desired density, and specification thickness 75mm compacted as per relevant clause of MORTH specifications including all leads, lifts, loading, unloading, all costs and carriages of materials upto site fo work complete job. |
| 65 | Providing and applying tack coat using Hot stright run bitumen of grade 80/100 including heating the bitumen and spraying the bitumen with machnically operated spray unit fitted on bitumen boiler cleaning and preparing the existing road surface to remove all dirt, dust mud etc and finally brooming the surface as per relevent clause of MORTH specifications on WBM / WMM surface @ 0.75 kg / Sqm including all leads, lifts, costs & carriages of materials involved upto site of work complete job |
| 66 | On BT Surface |
| 67 | Providing, laying by manually & rolling with 80-100KN Roller 20mm thick open graded compacted premix carpet surfacing using Bitumen of grade 80/100 @ 1.44Kg/Sqm of road surface, using stone chippings 0.027Cum/Sqm (13.2mm size @ 0.018Cum and 11.2mm size @ 0.009Cum/Sqm) including P/L and rolling with 80-100KN roller seal coat of premixed fine agg. using Bitumen @ 0.768Kg/ of bitumen /sqm road surface using stone grit/ sand @ 0.006Cum/ Sqm & tack coat @ 0.50/0.75Kg of Bitumen /Sqm all inclusive including preparing surface for tack coat by wire brushing, brooming and fanning the surface with gunny bags to remove mud, loose dirt and dust by compressed air, providing and applying primer/ tack coat using hot straight run bitumen of grade 80/100 over prepared surface complete job as per relevant clause of MORTH specifications including cost and carriages of all involved materials up to site of work |
| 68 | P/L 50mm thick bitumenous macadam base course with stone agg of quality size and grading as specified in CPWD Specification and straight run bitumen of grade 80/100 @ 3.3% by weight of total mix (@ 66 kg /cum )including hot mixing of stone agg and bitumen in hot mix plant,transporting and laying mixed material with paver finisher to the required level and grade roling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density including all leads, lifts, costs & carriages of all materials upto site of work, Hire charges of tools, plant, equipments & all allied machinary with cost of labour, taxes, fee, testing charges for maintaining quality control during and after execution of work complete in all respects as per relevent clause of MORTH specifications |
| 69 | P/L of 25mm thick semi dense bitumenous course. Using material agg. Satisfying the gradation set out in Specification with 5% binder content (by weight of total mix @2.88Kgs/ Sqm) bitumen of grade 80/100 including hot mixing of materal at plant and laying with Hydrostatic Paver Finisher including rolling with 8 to 10 tonne capacity to achive the required compaction and density with bitumen 80/100 including all leads, lifts, costs & carriages of all materials upto site of work, Hire charges of tools, plant, equipments & all allied machinary with cost of labour taxes, fee, testing charges for maintaining quality control during and after execution of work complete in all respects as per relevent clause of MORTH specifications |
| 70 | P/L 6mm thick seal coat of premixed fine agg. (passing 2.36mm and retained on 180 micron sieve with bitumen 128Kg of bitumen of V.G 10 grade per Cum of fine agg. (0.768 Kg of bitumen/sqm) and 0.60 cum of fine agg. Per 100 sqm of road surface including rolling and finishing complete as per relevent clause of MORTH specifications including all leads,lifts, costs & carriages of all materials upto site of work,Hire charges of tools, plant, equipments & all allied machinary with cost of labour taxes, fee, testing charges for maintaining quality control during and after execution of work complete in all respects. |
| 71 | Centering & Shuttering using kitply including strutting propping etc & removal of form work including all leads, lifts, costs & carriages upto site of work complete in Foundation footings, Basis of colums, Plinth beams, walls & Mass concrete |
| 72 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 73 | Suspended floor, Roofs, Landings, Balconies, Beams, Lintels, stairs, stair landings |
| 74 | Edges of slabs under 20cm |
| 75 | 12mm thick cement plaster of mix 1:4 (1 cement: 4 coarse sand), including all carriages of material involved upto site of work complete. |
| 76 | 15mm thick cement plaster of mix 1:6 (1 cement: 6 coarse sand), including all carriages of material involved upto site of work complete. |
| 77 | Raised and cut pointing on stone work with cement mortar 1:3 (1cement : 3 fine sand) for plinth, including all carriages involved upto site of work complete |
| 78 | Flush Pointing on Stone work in cement mortar 1:3 inlcuding all leads lifts costs & carriage of materials upto to site of work complete |
| 79 | Engagements of JCB for excavation of earth etc, uprooting & removal of stumps / tree trunks & roots for various nature of works complete job |
| 80 | Engagement of labour /Mazdoor for carrying out works not listed the SSR |
| 81 | Engagement of skilled labour with all machinary like cutters, axe etc for pruning branch cutting of the trees and other similar nature of works |
| 82 | Pumping out water caused by springs, tidal or river seepage, broken watermains or drains and the like other than those items were minimal dewatering is included as per book of specifications. |
| 83 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal beyond site as per directions of engineer incharge at site complete |
| 84 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign including all carriages of material involved upto site of work |
| 85 | Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. Old work (One or more coats) |
| 86 | Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). including all carriages upto site of work complete. |
| 87 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer including all carriages upto site of work complete. Cautionary/warning board with each side 900mm and support length 3650mm |
| 88 | Providing & erecting \\"W\\" metal beam crash barrier comprising of 3mm thick corrogated sheet metal beam rail 70cm above road / ground level, fixed on ISMC series channel vertical post, 150x75x5mm spaced 2mtr center to center, 1.8 M high , 1.1 Mtr below ground/ road level, all steel parts and fitments to be galvanised by hot dip process all fittings to confirm IS: 1367 & IS: 1364 metal beam rail to be fixed on the verrtical posts with the spacer of channel section 150x75x5mm, 330 mm long complete as per clause 810 incl cost of cement concerete blocks of size 0.45mx045mx0.60m in M20 grade with earth work etc and all cariages complete upto site of workType A \\"W\\" metal beam crash barrier |
| 89 | Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1: 6 (1 cement: 6 coarse sand), including extra for brick work in superstructure above plinth level up to Floor-V level, including all carriages of material involved upto site of work complete. |
| 90 | Felling trees of the girth (Measured at the height of 1 m above ground level ) including cutting of trunck and branches ,removing the roots and stacking the serviviable material and disposal of unserviceable material. Beyond 30cm Girth upto and including 60cm girth |
| 91 | Beyond 60cm Girth upto and including 120cm girth |
| 92 | Beyond 120cm Girth upto and including 240cm girth |
| 93 | Above 240cm Girth |
| 94 | Providing of Geotech Photographs of each item of work minimum 3 sets (One set comprising of Photograpgh before,during and after execution of work of size 26cmx21Cm |
| 95 | Note: Any other item not covered in the BOQ, if required to be executed at site shall be paid strictly as per the rate mentioned in JKSOR-2022/LMR minus the quoted percentage by the bidder Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender