Tender For Construction Of Ado Office At Bhawanipatna
Tender Value
82.51 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
82515
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalahandi → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ado Office At Bhawanipatna
BOQ
| Sl. No. | Item Description |
| 1 | Ground Floor |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 3 | Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. |
| 4 | Dismantling and removing R.C.C. columns, beams, slab, staircase, landing & lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 5 | Dismantling Brick / Tile work in cement mortar including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres |
| 6 | Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling etc. complete including cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 7 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge |
| 8 | Filling foundation and plinth with sand well watered and rammed etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 9 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 10 | Cement concrete of proportion (1:2:4) in foundation and floors using 20 mm size clean hard black crusher broken granite stone metal etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 11 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make,design,colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRCSP63:2018. |
| 12 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in F&P etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 13 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in Superstructure etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 14 | Ground Floor |
| 15 | 1st Floor |
| 16 | 2nd Floor |
| 17 | RCC M20 using black hard crusher broken granite chips of approved quality from approved quarry including centering and shuttering, hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 18 | Ground Floor |
| 19 | Column Base & Plinth Band |
| 20 | Tie Beam |
| 21 | Lintel and sill pad |
| 22 | Column & Beam |
| 23 | Sunshade and Chajja |
| 24 | Ground Floor Slab |
| 25 | Staircase |
| 26 | 1st Floor |
| 27 | Lintel and sill pad |
| 28 | Column & Beam |
| 29 | Sunshade and Chajja |
| 30 | 1st Floor Slab |
| 31 | Staircase |
| 32 | 2nd Floor |
| 33 | Column & Beam |
| 34 | 2nd Floor Slab |
| 35 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 36 | Ground Floor |
| 37 | 1st Floor |
| 38 | 2nd Floor |
| 39 | 20 mm thick grading Cement Plaster in c.m(1:4) complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 40 | 1st Floor |
| 41 | 2nd Floor |
| 42 | 16 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 43 | Ground Floor |
| 44 | 1st Floor |
| 45 | 2nd Floor |
| 46 | 12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 47 | Ground Floor |
| 48 | 1st Floor |
| 49 | 2nd Floor |
| 50 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 51 | Ground Floor |
| 52 | 1st Floor |
| 53 | 2nd Floor |
| 54 | Finishing wall surface of walls with Wall Putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 55 | Ground Floor |
| 56 | 1st Floor |
| 57 | 2nd Floor |
| 58 | Finishing walls with 1 coat water based Primer on new work to give an even Shade including cost of Primer, per 1 sqm with cost of all materials taxes, labour T&P etc complete. |
| 59 | Ground Floor |
| 60 | 1st Floor |
| 61 | 2nd Floor |
| 62 | Wall painting 2 coat with plastic emulsion paint of approved shade on New work to give an even shade including cost of Paint, per 1 sqm with cost of all materials taxes, labour T&P etc complete. |
| 63 | Ground Floor |
| 64 | 1st Floor |
| 65 | 2nd Floor |
| 66 | Wall painting 2 coat with Weather coat paint of approved shade on New work to give an even shade including cost of Paint, per 1 sqm with cost of all materials taxes, labour T&P etc complete. |
| 67 | Ground Floor |
| 68 | 1st Floor |
| 69 | 2nd Floor |
| 70 | Supplying, Fitting and fixing Vitrified tiles in Floors of size 600 mm x 600 mm of approved make conforming to IS13755 laid on 20 mm thick cement mortar [1:4] filling joined with white cement of approved quality complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 71 | Ground Floor |
| 72 | 1st Floor |
| 73 | Supplying, Fitting and fixing Vitrified industrial floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS 1457 of size 300 mm x 300 mm laid on 20 mm thick cement mortar [1:4] filling joined with white cement of approved quality complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 74 | Ground Floor |
| 75 | 1st Floor |
| 76 | Fixing Ceramic tiles size 30 cm x 30 cm / 40 cm x 40 cm in Floors, Treads on steps & landing on 25 mm thick bed of cement mortar [1:1] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete |
| 77 | Ground Floor |
| 78 | 1st Floor |
| 79 | Fixing Ceramic tiles 20 cm x 30 cm / 20 cm x 20 cm in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 80 | Ground Floor |
| 81 | 1st Floor |
| 82 | Supply, Fitting & Fixing of Iron work wrought and put up in grated doors, windows, Collapsible gate and cage latrines of all materials with labour, cess and T&P etc. required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 83 | Priming one coat to Steel surface with Red oxide Primer complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 84 | Painting Two coat to Steel surfaces with Enamel Paint complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 85 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures in all Floors. |
| 86 | Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete. |
| 87 | Supplying, fitting & fixing in position of Window (Fixed type) made of aluminum section 9778 as windows frame section No. 4095, 4096 with 5 mm thick black glass as panel fitted with rubber bending including all fitting complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction of the EIC. |
| 88 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all Floors. |
| 89 | Supplying, fitting and fixing of size 125mm X 65mm of required length of FRP door frame for including Providing and fixing factory made door frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. |
| 90 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90m C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect engineer-in-charge, excluding labour cess and GST. |
| 91 | Supplying, fitting & fixing in position of False Ceiling with aluminium anodized T section No.3215 with 2'-0\\" center to center, L section No.1705 up to 15 micron on 4 walls to be fixed by means of steel screw and P.V.C. plug and the aluminium grid 2'-0\\" x 2'-0\\" with 12.5 mm thick gypsum board of size 6' x 4' suspended from ceiling etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC. |
| 92 | Supplying of Fabricated M.S. Members made of M.S. Sections (square hollow sections / Rectangular Hollow Sections / Angles/Round Hollow pipes/ ISMB Channel Sections etc.) as per approved drawing and design, cut to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in all floors. |
| 93 | Hoisting joists and trusses and placing in position (labour only) for the work etc. complete as per the direction for the EIC. |
| 94 | Supply, Fitting and Fixing of 0.4mm G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. |
| 95 | BOREWELL |
| 96 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination drilling rigs ( 1200 cfm/300psi) as required to suit to the site condition as per direction of Engineer-in-charge including use of own rig with its accessories, tools and plant, and consumables etc., for lowering of 200mm dia PVC/ GI Pipes for housing , fitted with socket and with or without well screen as per the necessity for soft, medium hard and boulder formation (GI/ PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well ). |
| 97 | Labour for drilling to accommodate 200 mm x 150 mm size vertical bore hole (0.00 to 100.00 mtr ).(0.00 to 30.00 mtr ) |
| 98 | Lowering the following size GI/ PVC pipes with or without slotted pipes as per the necessity from ground level fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc., complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. |
| 99 | 0 to 30 mtrs or more |
| 100 | Cleaning and developing the tube wells using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of Engineer-in-charge. |
| 101 | Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition . |
| 102 | With drawing of 150 mm dia PVC/GI casing pipe. 0 to 30 mtrs or more. |
| 103 | Filter Media (Gravel) with size varying from 40 to 60 mm at bottom to 2 to 5 mm (S/R 2022 Pg 240) |
| 104 | Supply of 150 mm dia Sch 80 PVC casing pipe ( As Per S/22 Page 141) |
| 105 | Supply of 150mm diaPVC (C.S) END CAP |
| 106 | Supply of 3-phase 1.5 H.P Submersible Pump set (Kirloskar / Lubi) of atleast 12 stage & 48 LPM discharge with Control Pannel, rate as per EP&M |
| 107 | Supply of PVC insulated 3 core Flat Cable of 4.0 Sqm, rate as per EP&M with connection & all complete |
| 108 | Supply of 40 mm HDPE pipe (Cost only) |
| 109 | Fittings such as Nipple,Reducer,Socket,NR valve,Sluice valve,8 mm² PVC coated wire rope. |
| 110 | Labour charges for installation of pump, pipe, panel, cable & other electrical equipments etc. including all material Cost & transportation of materials. |
| 111 | Water supply & Sanitary work |
| 112 | Fixing 1000 litre/500 Litre capacity Double Layer Cylinderical Vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 10.00 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge, excluding labour cess and GST. |
| 113 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete, as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 114 | 32 mm dia PVC ASTM pipe (sch-80) |
| 115 | 15 mm dia PVC ASTM pipe (sch-80) |
| 116 | Providing and fixing of the fittings including all materials and labour as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 117 | 15mm dia C.P. short body bib cock |
| 118 | 15mm dia C.P.long body bib cock |
| 119 | 15mm dia C.P.Angular stop cock |
| 120 | 15mm dia CP revolving shower |
| 121 | CP soap holder |
| 122 | Ball Valve teflon brass ball & spindle 32 mm |
| 123 | Suppying and fixing Porcelain 22\\"x 16\\"(550x400) Wash Hand Basin with approved make & model with CI brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc including fixing Chromium Plated waste pipe of 32 mm nominal diameter, Chromium Plated Pillar taps & Chromium Plated Angle Valve of 15 mm dia nominal bore with approved make & model, 15 mm dia PVC inlet connection pipe as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC., excluding labour cess and GST. |
| 124 | Fixing Wash Down Water Closet (European type W.C pan) with integral or trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 125 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. |
| 126 | Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures completeas per the direction of engineer-in-charge, excluding labour cess and GST. |
| 127 | Fixing bowl pattern urinal conforming to IS 2556: Part6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp with 15 mm dia CP Urinal Spreader etc all complete as per specification as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 128 | Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification.(size 450mm x 350mm) as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 129 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 130 | Fixing standard sized Chromium Plated brass towel rail [600x20 mm] complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 131 | Laying in trenches PVC pipes conforming to IS:4985-2000 and specials of thefollowing outside dia Pipe (ISI type-A) including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately) |
| 132 | 75 mm OD P.V.C. SWR S/S Pipe |
| 133 | 110 mm OD P.V.C. SWR S/S Pipe (Rain Water Pipe) |
| 134 | Supplying and fixing 90 mm dia P.V.C. Nahani Trap [PVC floor traps] as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC. |
| 135 | Other sepitic tank fittings and connection with saok pit and etc |
| 136 | Extra fitting for water supply Connection |
| 137 | Proving and fixing of PVC doors for Toilet including frame complete in all respect both materials and labour as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 138 | Providing and fixing RO water purifier of 7 litre and above container capacity of make like Livpur/Aquaguard/kent with all fitting complete including supply of water supply to the point all complete as per the direction of Engineer-in-Charge |
| 139 | Construction of Septic Tank and Soak Pit |
| 140 | Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge |
| 141 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 142 | C.C.(1:4:8) with 40 mm. size h.g. metal in F&P including cost, conveyance, royalties of all materials with all labour, and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 143 | C.C.(1:2:4) with 12 mm. size h.g.chips including cost, conveyance, royalties of all materials with T&P etc. Required for the work complete.Excluding the cost and TC and laynig of HYSD bars as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 144 | Providing HYSD bars for reinforcement as per technical specification including cost, conveyance of all materials with labour, and T&P etc. required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 145 | Brick work with Fly AshBrick having crushing strength not less than 75 kg/cm2 in cement mortar (1:6) in F& P as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 146 | Honey comb masonary work with Fly AshBrick having crushing strength of 75 kg/cm2 in cement mortar 1:4and plastering in 1:6 as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 147 | 16mm plastering in cm (1:6) as per the direction of engineer-in-charge, excluding labour cess and GST. |
| 148 | Cement punning |
| 149 | Electrification |
| 150 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with one 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 151 | Group A |
| 152 | Group B |
| 153 | Group C |
| 154 | Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 155 | Providing, Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 156 | Supplying and fixing of following Modular type switch / socket on the existing switch box / cover including connections etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 157 | 5 / 6 amps. one way modular switch |
| 158 | 3 pin 5 / 6 amps, modular socket outlet |
| 159 | 15 / 16 amps, one way modular switch |
| 160 | 6 pin 15 / 16 amps, modular socket outlet |
| 161 | Providing & Recessed wiring to submain in 2 X following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 162 | (2 x 1.5 sq.mm + 1 x 1.5 sq.mm) |
| 163 | (2 x 2.5 sq.mm + 1 x 1.5 sq.mm)(2.5 mm inverter line included) |
| 164 | (2 x 4 sq.mm + 1 x 1.5 sq.mm) |
| 165 | (2 x 6 sq.mm + 1 x 2.5 sq.mm) |
| 166 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 167 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But with out MCB/ RCCB/ Isolator) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 168 | Supply and fixing of Single 5 amp to 32 amp rating 240 V \\"B\\" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 169 | Supply and fixing of Single pole 5 amp to 32 amp rating 240 V \\"C\\" series miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 170 | Supply, Installation, Testing, and Commissioning of 100 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. Make- SEIMENS/ HPL/ ANCHOR /L&T /HAVELS /C & S / RK |
| 171 | Supply & Fixing of 100 A, Pannel Board with provision of 1no of 100 A 415V, 35KA, Rotary Phase selector, MCB, 100A, Busbar 3 Nos of 100 A DP MCB of :D: series of Havells make inculding Stabilizer all Connected properly to the inverter and pannel including labour chrges, transportation charges & fixing charges. |
| 172 | Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 173 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 174 | Supplying and fixing of LED Light (Bulb/Tube Light)/Street Light/Flood Light of ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Havells/Bajaj/Crompton/Phillips) |
| 175 | 15 Watt LED Light Bulb |
| 176 | 20 Watt LED Tube Light |
| 177 | 7 Watt LED Panel Light (Round/Square) |
| 178 | 18 Watt LED Panel Light (Round/Square) |
| 179 | 30 Watt LED Street Light |
| 180 | 50 Watt LED Flood Light |
| 181 | Supply, Installation, Testing and Commissioning of 48” AC ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.(Bajaj, Usha, Khatian,Havells, orient) |
| 182 | Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. |
| 183 | Installation, testing and commissioning of exhaust fan upto 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Bajaj, Usha, Khatian) |
| 184 | Supply and Installation, testing and commissioning of 4 Kva Inverter with 12v 150Ah Battery and above with connecting to the power supply line and wiring all complete. (make Luminous) |
| 185 | Supply and Installation, testing and commissioning of Air Conditioner of 1.5 ton (Inverter type ) with 5 star rating with power stabiliser 4 KVA, labour for opening, including making the hole to suit the size of the above A/C, making good the damage wall complete all materials and labour including connections, etc.as required.(LG,Voltas, Llyod,) |
| 186 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , filling the trench etc. as required but excluding and cushioning , protective covering complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender