Tender For Construction Of Boundary Wall For Oav At Vallery In The District Of Rayagada
Tender Value
38.51 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
10 days left
EMD
38600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Boundary Wall For Oav At Vallery In The District Of Rayagada
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing of CB Brick / Stone masonary in C.M/ L.M upto 3.0m hight including stacking the useful materials for reuse and removing the derbies within 50m lead including cost, conveyance, of all materials with all labour and T&P,Cess required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge. |
| 2 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed and depositing the excavated materials away from the work site within initial lead & lifts etc. complete as directed by the Engineer in charge. |
| 3 | Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and taxes of all materials, cost of all labour and T&P,Cess etc. complete in all respect as per direction by the Engineer in charge. |
| 4 | Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P,Cess etc complete as per the direction of the Engineer -in –charge. |
| 5 | Fly ash brick masonry in foundation with cement mortar (1:6) in Superstructure using fly ash bricks of “23cmx11cmx8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 6 | Back filling of surplus excavated earth at work site by initial lead of 50m and initial lift 1.5m including cost of all labour, T&P,Cess and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 7 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Column below plinth) |
| 8 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Plinth beam) |
| 9 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Column ) |
| 10 | Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance of all materials and cost of all labour with all T&P,Cess required for the work etc. complete as directed by the Engineer- in-Charge. |
| 11 | Fly ash brick masonry in all floors with cement mortar (1:6) in Superstructure using fly ash bricks of “23cmx11cmx8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 12 | Providing 16 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 13 | Providing 12 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P, Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 14 | Finishing wall surfaces with cement washing one coat using cement on inside plster / concrete surface of approved quality for making smooth even to receive painting including watering and curing with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 15 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge. |
| 16 | Supplying of M.S. Angle / square bar of approved size, febricatrd to fix GCI sheets on roof etc including cost, conveyance of all materials complete as per the instruction of Engineer-in-Charge . |
| 17 | Supplying, fitting, fixing of RCC (1:2:4)fencing post wit chips 1.68m long 13cm x 13cm at bottom and 8cm x 8cm at top and 30cm x 30cm x 8cm base finished smooth including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P,Cess etc. complete as per the direction of the Engineer-in-charge. |
| 18 | Supplying, fitting, fixing barbed wire including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P,Cess etc. complete as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender