Tender For Pwd Road To Tileimalti_Road_Pot Hole Repair And And Sdbc_0.000 To 3.720
Tender Value
46.61 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
9 days left
EMD
46611
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Pwd Road To Tileimalti_Road_Pot Hole Repair And And Sdbc_0.000 To 3.720
BOQ
| Sl. No. | Item Description |
| 1 | Trimming of grass and weeds from the shoulder / berms and disposal the same to the suitable location as per technical specification Clause 1914 of MORD as per direction of the Engineer in charge |
| 2 | Providing ,laying ,spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant ,carriage of mixed materials by tipper to site ,laying in uniform layers with pave . |
| 3 | Providing and applying Primer Coat with bitumen emulsion SS-1 at the rate of 0.60 kg/sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works. |
| 4 | Providing & applying Tack Coat with bitumen emulsion using emulsion pressure distributor @ 0.25 to 0.30 Kg/ Sqm on prepared bituminous surface using mechanical means as per Clause- 503 of MoSRT&H Specification for Road & Bridge works(4th Revision). |
| 5 | Providing and laying Semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled,vibratory roller and tandem rollers to achieve the desired compaction as per Clause-508 of MoSRT&H Specification for Road & Bridge works(4th Revision) |
| 6 | Construction of moorum shoulder with approved materials obtained from borrow pits ,transporting to site ,spreading ,grading to required slope and compacting to meet requirement as per direction of the Engineer-in-charge (By mechanical means ) |
| 7 | Providing & fixing RCC ordinary KM stone & 5th stone for finished item of work as per approved drawing & technical specification and clause 804 & 806 of MoRT&H specification for road & bridge works (4th revision ) (A) Ordinary Kilometre Stone |
| 8 | Providing & fixing RCC ordinary KM stone & 5th stone for finished item of work as per approved drawing & technical specification and clause 804 & 806 of MoRT&H specification for road & bridge works (4th revision ) (B) 200 M stone |
| 9 | Providing & erecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Clause-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 801.3 ,fixed over 2 mm thick aluminium sheeting Clause 6.5.2 of IRC 67 -2012 with angle iron frame 75 mmx75mmx6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6 mm .1200 mmx900 mm Informatory Sign Board |
| 10 | Providing & erecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Clause-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 801.3 ,fixed over 2 mm thick aluminium sheeting Clause 6.5.2 of IRC 67 -2012 with angle iron frame 75 mmx75mmx6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6 mm .Hospital ,school bus stop inform sign (88x600 ) mm |
| 11 | Providing & erecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Clause-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 801.3 ,fixed over 2 mm thick aluminium sheeting Clause 6.5.2 of IRC 67 -2012 with angle iron frame 75 mmx75mmx6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6 mm .900 mm equilateral triangle Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender