Tender For Construction Of 17 Nos. Self-Finance Scheme, Semi-Finished Houses (Type Design 90/162) In Sector-12A Of Majhola Yojna No. 4, Phase-2 (Vistar), Moradabad
Tender Value
2.88 Crore
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
5.76 Lakhs
Bank guarantee accepted
Document Fee
5310
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Moradabad → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 17 Nos. Self-Finance Scheme, Semi-Finished Houses (Type Design 90/162) In Sector-12A Of Majhola Yojna No. 4, Phase-2 (Vistar), Moradabad
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation by manual means in ordinary soil (Loam, clay or sand) including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundaiton trenches. For Building work only.(including all material,labour,T&P,required for proper completion of work.) |
| 2 | filling of available earth (including royalty) by manual means also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.(including all material,labour,T&P,required for proper completion of work.) |
| 3 | Providing and laying Cement Concrete with 4cm. guage approved stone ballast coarse sand and cement in proportion of 8:4:1 including supply of all materials,labour and T&P etc. required for proper completion of work. |
| 4 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and allaround the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along externel perimeter of building, expansion joints, surrounding of pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 part II 1981) Chloropyrophos or any other approved material such as Heptachlor or chlordance will be used the rate of application of chemical emulsion shall be as follows. (a) Treatment for masonry and foundation 6 liters per Sqm. (b) Back fill in immediate contact with foundation 7.5 liters/ Sqm (c.) Treatment of top surface of plinth fillings 6 liters/ Sqm. (d) Treatment junction of wall and the floor 7.5 litres/ Sqm. (e) Treatment of soil along external perimeter of building 7.50 liter/Sqm. (f) Treatment of soil along under apron along external (including all material,labour,T&P,required for proper completion of work.) |
| 5 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.50:3 in plinth band/beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost.(including all material,labour,T&P,required for proper completion of work.) |
| 6 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.50:3 in lintel sunshade excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost.(including all material,labour,T&P,required for proper completion of work.) |
| 7 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.50:3 in T-beam,beam at roof level, slabs excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost.(including all material,labour,T&P,required for proper completion of work.) |
| 8 | Providing and laying cast cement concrete in door sills,chaukhats,boundry posts,shelves and similar small work with cement approved coarse sand and 2cm. gauge stone grit in proportion of 1:2:4 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost.(including all material,labour,T&P,required for proper completion of work.) |
| 9 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work including supply of all steel and binding wire(including all material,labour,T&P,required for proper completion of work.) |
| 10 | M-150 brick work in 1:6 (one cement and six coarse sand of 1.75 F.M. mortar) in foundation and plinth including supply of all meterials, labour and T&P etc. required for proper completion of work(including all material,labour,T&P,required for proper completion of work.) |
| 11 | M-150 brick work in 1:6 (one cement and six coarse sand of 1.75 F.M. mortar) in Superstructure including supply of all meterials, labour and T&P etc. required for proper completion of work(including all material,labour,T&P,required for proper completion of work.) |
| 12 | M-150 brick work in 1:4 (one cement and fourth coarse sand of 1.5-2.0 F.M. mortar) in for half brick thick Superstructure including supply of all meterials, labour and T&P etc. required for proper completion of work required for proper completion of work including necessary cutting and moulding of brick as requried thickness of walls half brick thickness (including all material,labour,T&P,required for proper completion of work.) |
| 13 | Painting on plinth band with two coat of air blown bitumen 80/50 or 85/25@ about 1.7 Kg/ Sqm including cost of fuel if any.(including all material,labour,T&P,required for proper completion of work.) |
| 14 | Providing an laying \\"brick coba\\" 12 cm average thick laid with M150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm×30 cm and side wall parapet shall be monolythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour, T&P etc complete for proper comletion of work.(including all material,labour,T&P,required for proper completion of work.) |
| 15 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws(including all material,labour,T&P,required for proper completion of work.) |
| 16 | fabrication of hold fast nosing hold fast ,Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie roads, gratings, gril , stair case railing door and window fram including cost of hings etc. wrought to required form, including of supply of steel, boalts nuts and wastage etc. and there fix. Includingtwo ormor coat of red oxide zinc chromat primer |
| 17 | (i)Fixing of steel or wooden chaukhats / Door chaukhats having angle iron 35x35x5 mm of mild steel as per the direction of Enginer in-charge |
| 18 | (ii) Fixing of steel or wooden chaukhats /Window chaukhats having angle iron 35x35x5 mm of mild steel as per the direction of Enginer in-charge |
| 19 | (iii)Fixing of steel or wooden chaukhats / Ventilator chaukhats having angle iron 35x35x5 mm of mild steel as per the direction of Enginer in-charge |
| 20 | 12 mm. Thick plaster with one part of cement and six part of approved coarse sand including supply of all materials labour and completion of work. on fair side of brick work,including plaster below plinth inside upto 15 cm from bottom of plinth band and outside plaster upto apron from bottom of plinth band including supplying of waterproofing compound as per manufacturer specification on fair side of brickwork.(including all material,labour,T&P,required for proper completion of work.) |
| 21 | 12 mm. Thick plaster with one part of cement and six part of approved coarse sand including supply of all materials labour and completion of work. (on fair side of brick work) (including all material,labour,T&P,required for proper completion of work.) |
| 22 | 12 mm. Thick plaster with one part of cement and six part of approved coarse sand including supply of all materials labour and completion of work. (on rough side of brick work)(including all material,labour,T&P,required for proper completion of work.) |
| 23 | 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.(including all material,labour,T&P,required for proper completion of work.) |
| 24 | Making groove of uniform size from 12x12mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens nailed to the under layer including removel of wooden battens, repairs to the edges of plaster panel and finishing the groove complate as per specification as direction of the Engineer- in- charge.(including all material,labour,T&P,required for proper completion of work.) |
| 25 | Distempring two coat with oil bound distemper over one coat of cement primer of approved brand and manufacture and required shade on undecorated wall surface to with an even shade over and including a primer coat with cement primer of approved brand after throughtly brushing the surface free from mortar droppings and other froeign matter and also including preparing the surface even and sand prepared smooth including cost of all materials.(including all material,labour,T&P,required for proper completion of work.) |
| 26 | Finishing wall with two coat of water proof cement paint of approved quality on new surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc. required for proper completion of the work. on external plaster only As per direction of E in C.(including all material,labour,T&P,required for proper completion of work.) |
| 27 | Providing wall putty on New surface with approvel quality material to give smooth and even surface ready to receive primer and paint.(including all material,labour,T&P,required for proper completion of work.) |
| 28 | Providing and laying apron of Cement Concrete with 2 cm. guage approved stone grit coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of work. (including all material,labour,T&P,required for proper completion of work.) |
| 29 | Providing and fixing glass strips in joints of cement concrete floors. 40 mm wide and 4 mm thick |
| 30 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes(For pressure upto 4kg/cm^2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes(.a) 110mm diameter (including all material,labour,T&P,required for proper completion of work.) |
| 31 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete.(including all material,labour,T&P,required for proper completion of work.)(a) 110mm |
| 32 | Providing and fixing 25mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge for house connection for water supply from supply line to house including all bends.(including all material,labour,T&P,required for proper completion of work.) |
| 33 | Providing and fixing brass stopcock 20 mm dia (including all material,labour,T&P,required for proper completion of work.) |
| 34 | Providing and fixing of upvc SWR ring fit pipe of class B of ISI mark Confirming to IS code 13592 (make prince, supreme finolex) in internal works of toilet and RWP etc. including fixing with rubber rings etc. including cost of all material, labour etc. complete.including excavation & trenches etc complete (including all material,labour,T&P,required for proper completion of work.) a) 110mm diameter |
| 35 | Haunching of SWR pipe 90mm or 110mm with pcc 1:5:10 cement concrete ( 1 cement:2 coarse sand:4 stone grit) ch-25 item no.2 for each house (including all material,labour,T&P,required for proper completion of work.) |
| 36 | Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali (including all material,labour,T&P,required for proper completion of work.) |
| 37 | Supply and laying of 25 mm dia CPVC pipe of prince,kissan,Supreme and other approved make in road crossing having thermal stability for hot & cold water supply all CPVC plain & brass threading fitting. This includes joints of pipe & fitting i/c supply of all material,labour and T&P etc & including cost of excavation in trenches, required for proper completion of the work. DAR 18.9.1(including all material,labour,T&P,required for proper completion of work.) |
| 38 | Making ferrule connection in 50-300 mm dia P.V.C Existing mains with 25 mm size brass ferrule excluding cost of excavation but i/c cost of cutting and threding the pipe etc and i/c supply of all material, labour and T&P etc. required for proper completion of the work.(including all material,labour,T&P,required for proper completion of work.) |
| 39 | Supply and fixing of 25mm dia CPVC end cap including supply of all matrial, labour and T&P etc. Required for completion of work (including all material,labour,T&P,required for proper completion of work.) |
| 40 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm (including all material,labour,T&P,required for proper completion of work.) |
| 41 | Supplying and fixing of FAN BOX(Hexagonal) (including all material,labour,T&P,required for proper completion of work.) |
| 42 | Supplying and fixing of Junction box (including all material,labour,T&P,required for proper completion of work.) |
| 43 | Supplying and fixing of electrical switch board as per plan (including all material, labour, T&P required for proper completion of work.) |
| 44 | Making expansion joints with 24gauge 25cm wide aluminium steet in wall with necessary cutting, shaping of bricks if any and covering joints by means of the 10mm thick plywood 12.50cm wide and match painted as per direction of Engineer-in-Charge supply of all materials labour and T&P etc. required for proper completion of the work. (including all material, labour, T&P required for proper completion of work.) |
| 45 | HOUSE NUMBERING SIZE 300 MM DIA |
| 46 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete (including all material, labour, T&P required for proper completion of work.) 300 X 16 mm |
| 47 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete (including all material, labour, T&P required for proper completion of work.) 250 X 16 mm |
| 48 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete (including all material,labour,T&P,required for proper completion of work.) 250 X 10 mm |
| 49 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete (including all material,labour,T&P,required for proper completion of work.) 200 X 10 mm |
| 50 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (including all material, labour, T&P required for proper completion of work.)125 mm |
| 51 | Providing and fixing PAD LOCK (including all material, labour, T&P required for proper completion of work.) |
| 52 | Construction of sewer connecting chamber inner size 0.45×0.45×0.90 M with brick work in 1:4 cement and coarse sand mortar i/c neccessary excavation, foundation concrete in 1:4:8 cement, coarse sand and 40 mm graded stone ballast and 12 mm thick inside plaster with 1:3 cement and coarse sand mortar finished with floating coat of neat cement, R.C.C. cover in 1:1.5:3 cement coarse sand and 20 mm graded stone grit 25 mm thick P.C.C. flooring in 1:2:4 cement,Coarse sand & 20mm graded stone grits. (Including Earthwork, Base Concrete 1:4:8, M-150 Class Brick work in 1:4 cement and coarse sand mortar in foundation, 12mm thick plaster in 1:3 Coarse sand mortar in inner side only with 3mm floating coat of net cement 25mm thick PCC flooring in 1:2:4, 10mm M.S. bar and RCC work in 1:1.5:3 in concrete, course sand and 20mm graded stone grit in slab) |
| 53 | Double wall corrugated pipes, SN8 250mm dia pipe made from High Density Polythylene (HDPE) (including all material, labour, T&P required for proper completion of work.) |
| 54 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. Pipe |
| 55 | S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat A |
| 56 | S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender