Tender For Construction/Errection Of Ht/Lt Lines, Lt Sub Stations Alongwith Other Associated Electrical Works, As When Consumers Request In Deposit Scheme To Be Primarily Executed In The Work Area Of (Assistant Engineer 11Kv & Lt Priyadarshini Colony
Tender Value
15 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
15000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction/Errection Of Ht/Lt Lines, Lt Sub Stations Alongwith Other Associated Electrical Works, As When Consumers Request In Deposit Scheme To Be Primarily Executed In The Work Area Of (Assistant Engineer 11Kv & Lt Priyadarshini Colony) Of 33/11 Kv Sub Station, Gsi & Priyadarshni Under The Jurisdiction Of Executive Engineer 11Kv & Lt Mahanagar, Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Safe carriage of following material from ESC Daliganj/Chinahut to JE Dump store including loading unloading and proper stacking of material |
| 2 | Line material |
| 3 | ST pole 11/9 Mtr |
| 4 | PCC Pole 8.5 Mtr |
| 5 | 11/0.4 KV 63/100 KVA T/F |
| 6 | 11/0.4 KV 250/400 KVA T/F |
| 7 | 11KV XLPE Cable |
| 8 | LT Cable 1x630/400/240/3.5x240/400mmsq |
| 9 | ACSR Rabbit/dog/Raccoon/Weasel conductor |
| 10 | ABC Cable 3x120/95/50/25sqmm |
| 11 | 11KV Pilfer resistance metering cubical |
| 12 | 11KV Pole mounted CT/PT |
| 13 | DP Box 3 Phase |
| 14 | Safe carriage of following material from JE Dump store to site including loading unloading |
| 15 | 11/9/ ST /8.5 Mtr Long PCC Pole |
| 16 | 11/0.4 KV 63/100 KVA T/F |
| 17 | 11/0.4 KV 250/400 KVA T/F |
| 18 | 11KV XLPE Cable |
| 19 | LT Cable 1x630/400/240/3.5x240/400mmsq |
| 20 | ACSR Rabbit/dog/Racoon/Weasel conductor |
| 21 | ABC Cable 3x120/95/50/25sqmm |
| 22 | 11KV Pilfer resistance metering cubical |
| 23 | 11KV Pole mounted CT/PT |
| 24 | DP Box 3 Phase |
| 25 | Fabrication, erection of sub-station type double pole on 8.5 mtr long PCC/11 mtr. Long ST pole along with fixing of necessary clamps. Accessories required including supply & fixing of straight MS 100x50mm top channel (2240mm long) one no., dropper channel, substation base angle 100x50 mm 2 nos. with arrangement of fixing 3 nos. pin insulator as per RESPO specification and direction of E/I. Only pole & insulator supplied by the deppt. |
| 26 | Digging of pit erection (As per RESPO norms) of 11KV 9/11/8.5 mtr long ST/PCC pole with fixing of necessary items, such as V-type X-arm, F-bracket, 11KV Pin/Disc insulator, guarding angle(1.8 mm65x65x6) with nut & bolts its ramming as per RESSPO Specification. Only pole, insulator & X-arm shall be supplied by the department. |
| 27 | Fabrication, erection T-Off pole single section pole along with T-Off channel clamp disc fitting & pin accessories, grouting in 1:4:8 cement sand and brick ballast as per RESPO specification. Only pole and insulator shall be supplied by the department. |
| 28 | Digging of pit erection (As per RESPO norms) of LT support suitable for laying of ABC line on 8.5mtr long PCC pole by providing of necessary eye hook/LT shackle insulator with clamps and its accessories etc. as per RESPO specification. Only Pole will be provided by the department. |
| 29 | Prepare proper space for construction of Plinth |
| 30 | Construction of T/F plinth of size 2x2x1.2 Mtr with first class bricks and massonary work in the ratio 1:4cement and course sand with RCC Top 1:2:2 cement sand and course sand stone gritt with MS bar and MS channel for resting of T/F |
| 31 | Fabrication and fixing of wiremesh fencing of 11/0.4KV S/S made as per require-ment 3mtr height 45x45x5 mm angle frame and 1 No horizontal runner by 40x5 mm MS flat then welding of wiremesh on it 50x25mm made of 12 SWG ,diagonal bracing of all the frame panel welded with MS flat 25x3mm support, groutin properly by cement concrete and course sand |
| 32 | Painting of wiremesh Fencing with 2 coat of red oxide and 2 coat of enamel Paint |
| 33 | Construction of masonry type DP Box with First first class brick ballast ,course sand ,cement and MS Bar local sand by making 2 Nos pillar 1 Mtr long 25mm width 6 feet height above ground level ,fixing of 2 Nos MS Angle for mounting of Henlay type fuse unit plastering both side with provision of ,all material arrange by contractor |
| 34 | Fabrication and fixing of Henley type Tailless Fuse Unit 500 Amp 650 Volts |
| 35 | Fabrication and Fixing of Electrolytic copper Bus bar of Size 50x6x750mm |
| 36 | Providing and fixing of 11KV DO Fuse set alont with clamp and nut bolt |
| 37 | Laying of cable 11 KV XLPE cable (3x35/70/120/170/185) sqmm in kaccha road by digging of trench laying cable with first class brick boxing and sand, as RESPO specification & direction of E/I. |
| 38 | Laying of cable 11 KV XLPE cable (3x35/70/120/170/185) sqmm in pakka road by boring method laying cable as per RESPO specification & direction of E/I. |
| 39 | Laying of cable 11 KV XLPE cable Double circuit (3x35/70/120/170/185) sqmm in kaccha road by digging of trench laying cable with frist class brick bixing and sand, as RESPO specification & direction of E/I. |
| 40 | Laying of cable 11 KV XLPE cable Double circuit (3x35/70/120/170/185) sqmm in Pakka road by digging of trench laying cable with frist class brick bixing and sand, as RESPO specification & direction of E/I. |
| 41 | Hoisting of 11KV cable will be passed through GI pipe required size duly clamped with pole at the bottom ,middle and top of the pole all material provided by contractor |
| 42 | High pressure testing of 11KV Cable by high pressure equipment |
| 43 | Proper Jumpering of 11KV Cable on tapping point |
| 44 | Laying of LT Cable from T/F to DP Box and DP Box to LT Line pole |
| 45 | Hoisting of LT cable will be passed through GI pipe required size duly clamped with pole at the bottom ,middle and top of the pole only cable supplied by department |
| 46 | Proper Jumpering with existing LT Line with PVC Cable and Al Lugs |
| 47 | Errection and commissioning of AB Conductor of size 3x120/95/50/25sqmm |
| 48 | Laying stringing and sagging of 3Phase 3 wire 11KV line on ACSR Weasel/Rabbit /Racoon /Dog conductor as per Respo |
| 49 | Providing and fixing of guarding angle on existing 11 KV support with clamp and nut bolts. |
| 50 | Cradle guarding of HT line by GI wire. GI wire shall be supplied by the department. |
| 51 | Ordinary Earthing by MS Earth rod2500 mm long all material provided by department. |
| 52 | Grouting binding nuzzling of stay set complete including fixing of necessary clamps accessories stay set and stay wire provided by department |
| 53 | Installation of 11KV CT/PT on double pole connected with metering unit along with providing and fixing of all accessories such as S/S base ,MS Flat ,clamps,nut and bolts, |
| 54 | Proper jumpering of 11KV Incoming and outgoing Cable with Pole Mounted unit |
| 55 | Dragging of pilfer metering cubical inside the metering room its installation and commissioning |
| 56 | Earthing of Pipe type with 60 feet deep boring and providing jindal make pipe \\"B\\" class 1\\" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe . |
| 57 | Safe Installation of 63/100 KVA T/F on double pole by providing and fixing of all accessories along with making HT/LT connection and its commissioning. |
| 58 | Safe Installation of 250/400 KVA T/F on double pole by providing and fixing of all accessories along with making HT/LT connection and its commissioning. |
| 59 | Making HT/LT Connection of T/F with suitable size of Al Lugs Copper L-Piece |
| 60 | Providing, fabrication and fixing of 11KV TPMO Set with AB Switch along with clamps, nut & bolts on existing double pole. |
| 61 | Fixing of 3 phase distribution box/kiosk on the LT poles including all clamps and material required for mounting connections and sealing. |
| 62 | Shifting of 11 KV/LT Pole, Line from existing pole and disconnect all the cables & its re-energisation |
| 63 | Dismantling of ST/PCC /Rail Pole and carriage back to JE Dump store |
| 64 | Strengthening double pole by replacement of top channel sub station base angle suitable for 63/100 KVA T/F. |
| 65 | Grouting of pole by cement course sand and stone gritt |
| 66 | Painting of ST pole by Al paint and post office red paint |
| 67 | Plinthing of ST Pole by cement stone gritt and course sand GST will be paid extra as per rule. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender