Tender For Flushing And Deepening Of Borewell And Well Water Distribution Pipeline For Borewell At Ward Areas In Ward No 68 Central Zone. Roc No. /2026/Md2
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Flushing And Deepening Of Borewell And Well Water Distribution Pipeline For Borewell At Ward Areas In Ward No 68 Central Zone. Roc No. /2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | Flushing of borewell of 6\\" dia requiring less than 4 hours operation using drill rods / hose with required size of pipes for various capacity compressor including transportation, labour and fuel charges for compressors etc., complete as per the direction of the departmental officers.SOR-2- WD-W0895 p.no 228 |
| 2 | Drilling of 200mm dia. Bore well in Hard Rock area anywhere in Coimbatore Municipal Corporation limit including transportation to the work site including labour charges for insertion of casing pipes as directed by the departmental officers. Etc complete., |
| 3 | Supply of 200 mm dia OD PVC CASING PIPE AS PER IS 12818/ 2010 suitable wall thickness including erection and welding including the cast of coupling etc complete..WD-M0030 p.no 7 |
| 4 | Drilling of 165mm dia. Bore well in overburned soil area anywhere in Coimbatore Municipal Corporation limit including transportation to the work site including labour charges as directed by the departmental officers. Etc complete., |
| 5 | Servicing delivery of THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase The starter winding should be made from high conductivity PVC insulated 3core flat copper cable of suitable size of work Duty 50LPM x 125 M head., amount 30% only |
| 6 | Supply and delivery of the following materials approved brand as per list with ISI marking and an approved by Corporation officers. |
| 7 | 50mm GI pipe ‘B’ WD-M0489.pno 30 |
| 8 | 50mm GI Bore coupling |
| 9 | 50mm dia non return valve WD-M0619 |
| 10 | 50 mm dia Ms bore clamp set |
| 11 | MS Borewell cover |
| 12 | 50mm GI Bend |
| 13 | 50mm GI Elbow |
| 14 | 50mm G.I Tee |
| 15 | 50mm G.I Union |
| 16 | 50mm dia Hex Nipple |
| 17 | Supply of shellock bottle |
| 18 | Supply of 63mmØ PVC pipe WD-M0010 |
| 19 | supply of 63mmØPVCcoupler WD-M0105 |
| 20 | supply of 63mm ØPVC Bend |
| 21 | supply of 63mm ØPVC Elbow |
| 22 | supply of 63mm ØPVC Tee |
| 23 | supply of 32mm dia PVC pipe M-0877 |
| 24 | 50 mm dia GM gate valve WD-M0618 |
| 25 | 20 mm C.I.Tap |
| 26 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). |
| 27 | Supply of PVC INSULATED AND SHEATHED 3 CORE 4SQMM FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER Etc complete., SOR-2-WD-M1975-p.no 140 |
| 28 | Lifting /Removal & Refixing of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective Horse power.SOR 2WD-W0856 p.no 224 |
| 29 | Supply and run of 4 of 10 sq.mm PVC insulated SC unsheated FRLS copper conductor of 1100v grade on 7/20 GI bearer wire for Service connection mian Sdno 368, p.no172. |
| 30 | Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge. |
| 31 | Cement concrete 1:4:8 (one cement, foursand and eight aggregate) using 40mm hardbroken granite stone jelly for foundationincluding dewatering if found necessary andlaid in layers of not more than 15 cm thickand compacted etc.,complete complying witstandard specification. |
| 32 | Supplying and Erecting SHUTTTERING including necessary supports for plane surfaces such as side walls etc, using mild steel sheets of size 90cm X 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarinas props at suitable intervals etc., complete complying with standard specification. |
| 33 | Cement concrete 1:3:6 (one cement, three sand and six aggregate ) using 20mm gauge hard broken granite stone jelly for All CC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete fixtures in CC works wherever necessary as directed by departmental officer etc., complete. |
| 34 | PLASTERING with cement mortar 1:5(one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications. |
| 35 | Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification |
| 36 | .Supply of RCC precast slab 200mm thick in C.C. 1:1.5:3 mix using 20m baby jelly including water curing, moulding charges etc., complete. |
| 37 | Hoisting the pre cast slabs placing in position including pointing with cement mortar etc. |
| 38 | Laying of PVC, UPVC & G.I. Pipes and specials to proper line and level including jointing but excluding cost of pipes and jointing materials for plumbing works for providing water supply and sanitary works in the premises of the building etc., complete.WD-W0734 p.no195 |
| 39 | Refillingh the excavation in all kinds of soil including labour charges initial lead andl lift as per the direction of Engineer-in-charge. |
| 40 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., sor2- WD-M1418 p.no 99 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender