Tender For Providing Wooden Flooring And Additional Improvement Works To Shuttle Court At Kaniappa Konar Street Park In Ward No 99, South Zone. Roc.No. 4517 / 2026 / Md4
Tender Value
15.70 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
9 days left
EMD
15700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Wooden Flooring And Additional Improvement Works To Shuttle Court At Kaniappa Konar Street Park In Ward No 99, South Zone. Roc.No. 4517 / 2026 / Md4
BOQ
| Sl. No. | Item Description |
| 1 | Painting with enamel paint in two coats of approved colour and quality including scrapping over old Wall Surface Area etc., complete . |
| 2 | Painting with enamel paint in two coats of approved colour and quality over new iron work etc. complete. |
| 3 | Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc., complete |
| 4 | Manufacturing, supplying and fixing of Teakwood ornamental Entrance door of size 1.20x2.10m with the following specification. The outer frame of ornamental Entrance Door of size 150x100mm Teak wood scantling. The door consists of openable area 1.06x2.03m with single leaf. The each openable shutter consists of Top Panel for 1.10m height and bottom vertical panel for a height of 1.00m. The Shutter bottom rail is of 200x50mm size and middle, top and side rails are of size 150x50mm with corner designed beading works. The shutter pannel is of 50mm thick T.W.planks with special curving works. The outer frames corners are designed border works single side for entrance outer frame and on both sides for middle frame. The cost includes all kinds of furniture fittings, such as special type heavy Brass Aldrop 300x20mm 1 No, special type heavy Brass tower bolt 300mm length 1 No and 200mm length 1 no, special type heavy brass hinges 200mm length 4Nos, special type door stopper 1 No, special type Ornamental door handles 2 Nos, Door bush and Door stopper etc., All the members are finshed with two coats of melamine polish outer the priming coat complete and as directed by the departmental engineers. |
| 5 | Supply, Fabrication and Erection of Mild Steel weldmesh7.5 x2.5x10 Gauge allround and lateral support, 4mm thick inner weldmesh invluding Transportation, Weldind and Fixing Charges etc,.. |
| 6 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC sheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe cealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). |
| 7 | Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 11 Watts CFL Bulb Bulb(SD 83) |
| 8 | Supply and fixing of single box type 4\\"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube (SD 87) |
| 9 | Supply and Fixing of 30W LED Street light Fitting with necessary Bowl and Bracket and Bulp as per Standard Quality as per the Direction of the Departmental officers etc., complete. |
| 10 | Supplying and fixing of Nylon net including all material and labour charges completed |
| 11 | Name board including painting and lettering etc., completed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender