Tender For Improvement Of Road From Mrityunjoypur Pry School To Barshadanga At Village Mrityunjoypur Within Narayanpur Gram Panchayat Under R Urhat - I Block In The District Of Birbhum
Tender Value
29.71 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
14 days left
EMD
59500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Birbhum → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Road From Mrityunjoypur Pry School To Barshadanga At Village Mrityunjoypur Within Narayanpur Gram Panchayat Under R Urhat - I Block In The District Of Birbhum
BOQ
| Sl. No. | Item Description |
| 1 | 1. ROAD PAVEMENT WORK: Clearing and Grubbing Road Land Remarks Complete RateLabour,T&P, Machineryetc. Clearing and grubbing road landincluding uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of toporganic soil not exceeding 150 mm in thickness. (Reference to MoRT&H's specification clause 201)II A. By mechanical means |
| 2 | Excavation for roadway in marshy soil with hydraulic excavator 0.9 cum bucket capacity including cutting and loading in tippers and disposal within all lifts and lead upto 1000 metres, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections (Reference to MoRT&H's specification clause 301) |
| 3 | Construction of embankment with approved material obtained frorn bomow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meetrequirement oftable 300-2 & 300-l .The size course material in the rnix of ea(h ordinarily shall not be exceed 75mm.(Reference toMoRT&H's specification clause 305). |
| 4 | Construction of sub-grade md earthen shoulders with approved material obtained frorn borow pits with all lifts & leads, transporting to site, spreading, grading to required slope andcompacted to meet requirement table No. 300-2 (Reference to (MoRT&H's specification clause 305). |
| 5 | Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in unifonn layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material detennined as per IS:2720 (Part 8), complete as per clause 40I desired density, complete as per clause 401Using Pakur Variety Stone Chips |
| 6 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling,testing etc. as per drawing and Technical,Specifications (Reference to MORT&Hs specifications 1500, 1700 & 2200).Using Pakur Variety Stone Chips |
| 7 | 400 G polythene sheet |
| 8 | Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 percent bitumen by weight |
| 9 | 2. ROAD FURNITURE WORK: Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side 4 (ii) 60cm equilateral triangle dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801).(ii) 60cm equilateral triangleUsing Pakur Variety Stone Chips |
| 10 | Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side 4 (ii) 60cm equilateral triangle dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801).(iii) 60cm circularUsing Pakur Variety Stone Chips |
| 11 | Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side 4 (ii) 60cm equilateral triangle dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801).(vi) 60 cm x 60 cm squareUsing Pakur Variety Stone Chips |
| 12 | Providing and erecting direction and place identification retroreflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area notexceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x45 x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801).Using Pakur Variety Stone Chips |
| 13 | R.C. Guard postSupplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with nscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mendinggood damages if any during striking off shuttering,making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect.Using Pakur Variety Stone Chips |
| 14 | 3. CROSS DRAINAGE WORK:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter,dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work (Reference to MoRT&H's specificationclause 304). Mechanical means(Depth up to 3 m) Foundation |
| 15 | Sand Filling in Foundation Trenches with good local sand free from earth not exceeding 150 mm compacted thickness including inundating each layer by profuse water and porking and rammimg layer by layer. Quality of sand is to be approved by the Engineer-in-charge.(Reference to MORT&H's specification 304). |
| 16 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). 8B. PCC grade M20Using Pakur Variety Stone Chips |
| 17 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200).8C. RCC grade M20Using Pakur Variety Stone Chips |
| 18 | Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper position of uncoated HYSD reinforcement bar in sub-structure complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 1600 & 2200). |
| 19 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm (Reference to MORT&H's specification 800). |
| 20 | Add GST @18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender