Tender For Repairing Of Black Top Road In Lichubagan Area W. No. 09 Under Dum Dum Municipality
Tender Value
5.01 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
10036
Bank guarantee accepted
Document Fee
2007
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Black Top Road In Lichubagan Area W. No. 09 Under Dum Dum Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate conforming to the grading of table 40013 revised vide table 2 of IRC : 109 (2015) to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density .The thickness of a single compacted layer shall not be less than 75 mm.(Reference to MoRT&H's specification 406.=95mX 4m X 0.075m |
| 2 | Tack CoatProviding and applying tack coat with paving bitumen of VG-10 grade conforming to IS:73 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).On Granular surfaces (Using Bitumen VG 10 at the rate of 0.25 to 0.3 kg per sqm.) = 95 X 4 On Bituminous Surface ((Using Bitumen VG 10 at the rate of 0.20 to 0.3 kg per sqm.) = 25m X 3.3 m |
| 3 | Bituminous MacadamProviding and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix , transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504).(95m X 4.0 m + 25 m X 3.3 m) x 0.05 |
| 4 | Open - graded premix surfacingProviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).(95m X 4.0 m + 25 m X 3.3 m) |
| 5 | Seal coatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511)(95m X 4.0 m + 25 m X 3.3 m) Sub Total without GST & Labour Cess Add 18 % GST Sub Total Add 1 % Cess of Sub Total |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender