Rural Development Government Departments Closing in 5 days TDR #57036184

Tender For Liquid Waste Water Management At Junction Tal Indapur Dist Pune

Issued by Government Departments · Pune, Maharashtra
Tender Value
30.53 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
5 days left
EMD
30533
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Liquid Waste Water Management At Junction Tal Indapur Dist Pune

BOQ

Name of Work:- Liquid Waste Water Management At Junction Tal Indapur Dist Pune
Sl. No. Item Description
1Community Leach Pit 1 - Excavation for foundation / pipe trenches in earth, soils of all types, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. MJP SSR 2023-24 P.No. 37 Iteam no. 1
2Excavation for foundation / pipe trenches in Hard Murrum including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A4/259) MJP SSR 2023-24 P.No. 37 Iteam no. 2
3Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A4/259) Iteam no. 5
4Providing and laying in situ 1:2:4 ( M-150 ) Grade of c.c. of trap/ granite/ quartzite/ gneiss/ metal for foundation and bedding including dewatering, formwork, compaction, and curing, finishing Etc. complete. With initial lead of 1.50 M below / above G.L.as per MJP/ SSR/ 2023-24 / Section G Plain,reinforced and ready mix concrete / Item No.1 (b)/ Page no.47
5Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete.Spec.No. :Bd.G.3 Page No.314. PWD SSR. 2022-23 I.No.27.03 P. No. 197
6Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Spec. No. Bd. L.2 Page No. 368 PWD S.S.R. 2022-23 I.No. 32.04 P.No. 209
7Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent). Working Pressure 6 Kg./Sq.cm. MJP SSR 2023-24 Iteam 1 P.No. 74
8PVC TEE (As per Market Rate)
9Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) MJP/ SSR/ 2023-24 / Section G Plain, reinforced and ready mix concrete / Item No.2/ Page no.47
10Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F-17/306) MJP/ SSR/ 2023-24 / Section G Plain, reinforced and ready mix concrete / Item No.8/ Page no.50
11Providing and filling in sand boxing in pipeline or for foundation with sand of approved quality including watering and compaction, etc complete (Bd-A-13/264) MJP SSR 2023-24 i. no 19 pg no 41
12Community Leach Pit 2 Rates and Items are same as per sr no 1 to 11
13Tiger Bio Filter (100 KLD STP) - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259). 0.0 to 1.5 m
14Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) 0.0 to 1.5 m
151.5 to 3.0 m
16Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-3/259) 1.5 to 3.0 m
173.0 to 4.5 m
18Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) 3.0 to 4.5 m
19Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)
20Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Spec. No. - Bd E /1 Page No. 287 and B- 7, Page No. 38
21Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
22Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase In RCC M-300
23Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Chajjas / Parapets / Curtain Walls /Partition Walls / Pardies In RCC M-300
24Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F-17/306) c) Corrosion Resistant Steel (Fe 500)
25Providing and fixing mild steel grill work for windows/ ventilators of 20 Kg/Sqm. As per drawings including necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, etc. complete. (Bd-U-1/537)
26Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed designs and drawings or as directed by Engineer-in-charge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-3/275)
27Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24B .W .G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts , lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 kg/sq.m.).
28Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.
29Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
30Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proportion 1:11 / 2:3 including scaffolding and fourteen days curing complete.
31Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.
32Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete.
33Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)
34Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
35Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen /using cement with waterproofing compound curing, formwork etc. complete.
36Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge
37For Site Clearance - Rent for JCB
38Providing and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle (50 x 50 x 6 mm) postat 2.5 m c/c including excavation of pits of foundation concrete fixing the posts in (1:4:8) cement concrete block of 45 x 45 x 45 cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting etc.complete
39Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.
40Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH-PL/STP
41Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
42Fine and Coarse Screen (Manual) of size 1.5 m length x 0.7 m width of SS 304 MOC and Manual hand rake for cleaning screen of SS handle 1 m in length and cleaning area of 6 nos 5 mm SS rod of total length 200 mm straight and 50 mm of 90 degree bend.
43Grit pump - Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below. 1 HP (Up to 9000 LPH) Supply
44Erection
45Tube Settler Sludge Transfer Pump - Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below 1 HP (Up to 9000 LPH). Supply
46Erection
47Raw Sewage Pumps - Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below. 1 HP (Up to 9000 LPH). Supply
48Erection
49NaOCl Chlorinator Pump Diaphragm Type / peristaltic type / Solenoid / Max Flow Rate Upto 10LPH Power Source Electric - Phase Single Material PP / PTFE(Teflon) / Voltage 230 Volt / Frequency 50Hz / Mixing Tank of 50 Ltrs capacity- 1 No / Dosing Pump - 1 Nos
50Raw water pump MCCB Panel Boards - Design, Supply, Installing, Commissioning & Testing of Master PLC control monitoring and communication panel as per IEC 61131 at Pure Water Sump suitable for monitoring and control of pure water Pumps. Pressure Transmitters, Level Transmitter, PH Transmitter, Turbidity Transmitter ,for all pumps installed. Supply
51Erection
52Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. Up to 7.5 HP. Supply
53Main power supply cable - Main DP to Control Panel cable. 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable. Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. 3 core 16 sq mm. Supply
54Erection
55Power cables - Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cable. Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. 4 Core 6 sq mm. Supply
56Erection
57Control Cables - Copper conductor PVC insulated, Unarmoured control cable. Supplying and erecting Un-armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner. 4 core 2.5 sq mm. Supply
58Erection
59Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 1) 10% of cost of pipes shall be considered for cost of PVC specials for estimate purpose only.2) One coupler and required cement solvent shall be provided with each full length pipe cost of which is included in rates below. Working Pressure 6 Kg/Sq.cm. Raw Sewage pump to TBF Distribution. Main header. 75 mm.
60TBF Distribution - 50 mm
61TBF collection to Outlet (gravity) Main header. 75 mm.
62TBF Bed Distribution. Distribution line for sripnklar. 20 mm
63PVC Specials 10%
64Collection Tributory + Drain Pipe - 75 mm.
65Settling Tank to Sludge Drying Bed - 75 mm.
66Ball Valve Plastic (Heavy Body)
67Bend (50 to 75 mm)
68Union(50 to 75 mm)
69Coupler(50 to 75 mm)
70Tee(50 to 75 mm)
71Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). 63 mm, 50 mm and 20 mm uPVC pipe
72Sluice valves - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
73Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.(Rate for all class of valves.) Sluice valves
74Supplying of Specially designed container for holding Bio media including mixture of cocohusk, bacterial culture with special worms per designed quantity including transportation & fixing in position as directed etc. complete.
75Tube Settler Media - Supply, Errection, Designing, fabricating Tube Settlers with PVC COOL Tubes of material PVC with UV stabilized. Surface Area: 11 m2/m3 at 60-degree Angle inclination; vertical height of each module 750 mm (size of each module block is 1.30 m long x 1.10 m wide x 0.75 m height)
76Stone Aggregate - 5 mm to 10 mm
7720 mm
7840 mm
79Transportation as per STATEMENT VI Including loading, unloading and stacking. Aggregate 40 mm & Below (25 Km)
80Detailed Process Designing, Technology charges and commissioning of Sewage Treatment Plant (STP) based on Tiger Bio Filter (TBF) technology as turnkey job Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57036184
AUTHORITY Government Departments
TENDER VALUE 30.53 Lakhs
LAST DATE 24-08-2026
Authority
Authority Name Rural Development Department
Work Description Tender for Liquid Waste Water Management At Junction Tal Indapur Dist Pune
Basic Detail
Tender No ZP/PUNE/RWS/E-Tender/ 06 /2026-27
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 17 Aug 2026
Submission Date 24 Aug 2026
Open Date 25 Aug 2026
Finance
Tender Value 30.53 Lakhs
Tender Fee 1180
EMD 30533
Exemption Not Available
Document List
a719ebcd-8bb2-41de-a725-f6e88c29a3d7.html
BOQ_2274636.xls
Tendernotice_1 (45).pdf
Tendernotice_2 (9).pdf
Tendernotice_3 (3).pdf
Tendernotice_4 (2).pdf
Tendernotice_5 (1).pdf
Tendernotice_6.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Aug 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

a719ebcd-8bb2-41de-a725-f6e88c29a3d7.html

xls

BOQ_2274636.xls

pdf

Tendernotice_1 (45).pdf

pdf

Tendernotice_2 (9).pdf

pdf

Tendernotice_3 (3).pdf

pdf

Tendernotice_4 (2).pdf

pdf

Tendernotice_5 (1).pdf

pdf

Tendernotice_6.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders