Tender For Supply Of Tractor For Fodder Cultivation (Tractor 50 Hp,Trolly 5Tn,Rotovater 6Ft,Reversiable Mouldboard(Mb)Plough)

Sharing tender

Tender for Supply Of Tractor For Fodder Cultivation (Tractor 50 Hp,Trolly 5Tn,Rotovater 6Ft,Reversiable Mouldboard(Mb)Plough) , Supply Of Tractor For Fodder Cultivation (Tractor 50 Hp,Trolly 5Tn,Rotovater 6Ft,Reversiable Mouldboard(Mb)Plough)Equipment With Minimum Technical Specification Mentioned In The Bid Document. , Tractor 50 Hp- • Engine Power: Minimum 50 Hp • Cylinder Count: 3 Or 4 Cylinders Operating Inline. • Displacement / Capacity: Approx. 3,300 cement concrete To 3,532 cement concrete • Engine Rated Rpm: Minimum 1850 To 2100 Rpm. • Torque Rating: Approx. 220 Nm To 235 Nm For High Pulling Capacity. • Cooling System: Coolant-Cooled System With An Overflow Reservoir. • Gearbox Configuration: 8 Forward + 2 Reverse Or 12 Forward + 3 Reverse Options. • Lifting Capacity: Robust 1,600 Kg To 2,200 Kg At Lower Link Ends. • Wheel Drive: 2Wd Or 4 Wd • Front Tyre Size: 7.50 × 16 (For 2Wd) Or 9.50 × 20 (For 4Wd). • Rear Tyre Size: 14.9 × 28 Or 16.9 × 28 For Heavy-Tillage Stability. , Rotavator 6 Foot • Size / Working Width: 6 Feet (Approx. 180 Cm To 195 Cm Working Width) • Tractor Power Required: Approx. 40-60 Hp • Blade Count: Typically 42 To 54 Blades • Blade Type: L-Type Configuration • Gearbox Type: Multi-Speed • Working Depth: 5 To 6 Inches Deep , Trolley 5 Ton • Standard Dimensions: 10 Feet Length × 6.5 Feet Width × 2 Feet Height (10 × 6 × 2) • Load Capacity: 5 Tons (Approx. 5,000 Kg Payload) • Chassis Size: Typically Heavy-Duty Channels Measuring Approx. 125 × 75 Mm To 150 × 75 Mm • Sheet Thickness: 3 Mm Mild Steel For The Bottom Floor Plate, 2 Mm For The Side Panels • Tipping Mechanism: Heavy-Duty Double-Acting Hydraulic Ram Providing A Tipping Angle Of Up To 45 To 55 Degrees • Axle Configuration: Single Axle For A 2-Wheel Setup • Suspension System: Heavy-Duty Leaf Spring Assembly For Smooth, Vibration-Free Operations Over Uneven Rural Roads , Reversible Mouldboard (Mb) Plough- • Power Source: Drawbar Pull Via Tractor Hydraulic Lift (3-Point Linkage) • Working Width: Approx. 2.5 To 3.5 Feet (Approx. 750 Mm To 1050 Mm) • Working Depth: 8 To 14 Inches Deep • Transmission Type: Hydraulic System Using Double-Acting Ram Via Scv Valve Speed: Approx. 3 To 5 Km/H