Tender For Supply Of Tractor For Fodder Cultivation (Tractor 50 Hp,Trolly 5Tn,Rotovater 6Ft,Reversiable Mouldboard(Mb)Plough)
Tender Overview
Project Description
Tender for Supply Of Tractor For Fodder Cultivation (Tractor 50 Hp,Trolly 5Tn,Rotovater 6Ft,Reversiable Mouldboard(Mb)Plough) , Supply Of Tractor For Fodder Cultivation (Tractor 50 Hp,Trolly 5Tn,Rotovater 6Ft,Reversiable Mouldboard(Mb)Plough)Equipment With Minimum Technical Specification Mentioned In The Bid Document. , Tractor 50 Hp- • Engine Power: Minimum 50 Hp • Cylinder Count: 3 Or 4 Cylinders Operating Inline. • Displacement / Capacity: Approx. 3,300 cement concrete To 3,532 cement concrete • Engine Rated Rpm: Minimum 1850 To 2100 Rpm. • Torque Rating: Approx. 220 Nm To 235 Nm For High Pulling Capacity. • Cooling System: Coolant-Cooled System With An Overflow Reservoir. • Gearbox Configuration: 8 Forward + 2 Reverse Or 12 Forward + 3 Reverse Options. • Lifting Capacity: Robust 1,600 Kg To 2,200 Kg At Lower Link Ends. • Wheel Drive: 2Wd Or 4 Wd • Front Tyre Size: 7.50 × 16 (For 2Wd) Or 9.50 × 20 (For 4Wd). • Rear Tyre Size: 14.9 × 28 Or 16.9 × 28 For Heavy-Tillage Stability. , Rotavator 6 Foot • Size / Working Width: 6 Feet (Approx. 180 Cm To 195 Cm Working Width) • Tractor Power Required: Approx. 40-60 Hp • Blade Count: Typically 42 To 54 Blades • Blade Type: L-Type Configuration • Gearbox Type: Multi-Speed • Working Depth: 5 To 6 Inches Deep , Trolley 5 Ton • Standard Dimensions: 10 Feet Length × 6.5 Feet Width × 2 Feet Height (10 × 6 × 2) • Load Capacity: 5 Tons (Approx. 5,000 Kg Payload) • Chassis Size: Typically Heavy-Duty Channels Measuring Approx. 125 × 75 Mm To 150 × 75 Mm • Sheet Thickness: 3 Mm Mild Steel For The Bottom Floor Plate, 2 Mm For The Side Panels • Tipping Mechanism: Heavy-Duty Double-Acting Hydraulic Ram Providing A Tipping Angle Of Up To 45 To 55 Degrees • Axle Configuration: Single Axle For A 2-Wheel Setup • Suspension System: Heavy-Duty Leaf Spring Assembly For Smooth, Vibration-Free Operations Over Uneven Rural Roads , Reversible Mouldboard (Mb) Plough- • Power Source: Drawbar Pull Via Tractor Hydraulic Lift (3-Point Linkage) • Working Width: Approx. 2.5 To 3.5 Feet (Approx. 750 Mm To 1050 Mm) • Working Depth: 8 To 14 Inches Deep • Transmission Type: Hydraulic System Using Double-Acting Ram Via Scv Valve Speed: Approx. 3 To 5 Km/H
BOQ
| Sl. No. | Item Description |
| 1 | Supply Of Tractor for fodder cultivation (Tractor 50 HP,Trolly 5TN,Rotovater 6Ft,Reversiable Mouldboard(MB)Plough)Equipment With Minimum Technical Specification Mentioned In The Bid Document. |
| 2 | Tractor 50 HP-• Engine Power: Minimum 50 HP• Cylinder Count: 3 or 4 cylinders operating inline.• Displacement / Capacity: Approx. 3,300 cc to 3,532 cc • Engine Rated RPM: Minimum 1850 to 2100 RPM.• Torque Rating: Approx. 220 Nm to 235 Nm for high pulling capacity.• Cooling System: Coolant-cooled system with an overflow reservoir.• Gearbox Configuration: 8 Forward + 2 Reverse or 12 Forward + 3 Reverse options.• Lifting Capacity: Robust 1,600 kg to 2,200 kg at lower link ends.• Wheel Drive: 2WD or 4 WD• Front Tyre Size: 7.50 × 16 (for 2WD) or 9.50 × 20 (for 4WD).• Rear Tyre Size: 14.9 × 28 or 16.9 × 28 for heavy-tillage stability. |
| 3 | Rotavator 6 Foot • Size / Working Width: 6 feet (approx. 180 cm to 195 cm working width)• Tractor Power Required: Approx. 40–60 HP • Blade Count: Typically 42 to 54 blades • Blade Type: L-type configuration• Gearbox Type: Multi-speed • Working Depth: 5 to 6 inches deep |
| 4 | Trolley 5 Ton • Standard Dimensions: 10 feet length × 6.5 feet width × 2 feet height (10' × 6' × 2')• Load Capacity: 5 Tons (approx. 5,000 kg payload)• Chassis Size: Typically heavy-duty channels measuring approx. 125 × 75 mm to 150 × 75 mm• Sheet Thickness: 3 mm mild steel for the bottom floor plate, 2 mm for the side panels• Tipping Mechanism: Heavy-duty double-acting hydraulic ram providing a tipping angle of up to 45 to 55 degrees• Axle Configuration: Single axle for a 2-wheel setup • Suspension System: Heavy-duty leaf spring assembly for smooth, vibration-free operations over uneven rural roads |
| 5 | Reversible Mouldboard (MB) Plough-• Power Source: Drawbar pull via Tractor Hydraulic Lift (3-Point Linkage)• Working Width: Approx. 2.5 to 3.5 feet (approx. 750 mm to 1050 mm)• Working Depth: 8 to 14 inches deep• Transmission Type: Hydraulic system using double-acting ram via SCV valveSpeed: Approx. 3 to 5 km/h Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender