Tender For Supply, Installation, Testing And Commissioning Of Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt/Hr)

Sharing tender

Tender for Supply, Installation, Testing And Commissioning Of Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt/Hr) , Supply, Installation,Testing & Commissioning Of Of Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt/Hr) Equipment With Minimum Technical Specification Mentioned In The Bid Document. , Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt Per Hr)- • A Rotary Drum Dryer Is Continuous Drying Equipment Used For Reducing Moisture Content From Bulk Materials By Direct Or Indirect Heating. The Machine Consists Of A Rotating Cylindrical Drum Mounted At A Slight Inclination, Allowing Material To Move From The Feed End To The Discharge End While Being Exposed To Hot Air. • Machine Type: Continuous Rotary Drum Dryer • Drum Material: Mild Steel (Ss316) Or Any Food Grade Equivalent • Drum Diameter: Approx. 1600 Mm - 2600 Mm • Drum Length: Approx. 7 To 9 Meter • Capacity: Minimum 2.5 Mt Per Hour • Moisture Reduction: Up To 70 % To Below 8-15% • Drum Speed: Minimum 0.5 - 11 Rpm • Heating Type: Direct / Indirect Heating • Heat Source: Biomass, Coal Etc. • Operating Temperature: Minimum 65°C - 300°C • Motor Power: Approx. 3 Kw - 160 Kw Or Minimum 20 Hp • Air Flow System: Co-Current / Counter-Current • Inclination Angle: Approx. 3° - 5° • Thermal Efficiency: Up To 80% • Operation Mode: Automatic / Semi-Automatic • Fuel Consumption: Depends On Material Moisture And Capacity • Control Panel: Plc / Electrical Control Panel • Drive System: Gearbox With Motor & Chain/Sprocket Drive • Support System: Tyre Rollers & Support Rollers • Dust Collection: Cyclone Separator / Bag Filter • Feeding System: Screw Conveyor / Belt Conveyor • Discharge System: Screw Conveyor / Rotary Valve • Following Machinery Equipment Shall Be Included: 1. Rotary Drum Shell: Heavy-Duty Rotating Cylindrical Body. 2. Internal Flights / Lifters: Lift And Shower Material Through Hot Air For Efficient Drying. 3. Burner / Furnace: Generates Hot Air Using Biomass, Gas, Diesel, Or Coal. 4. Drive Assembly: Motor, Gearbox, Girth Gear, And Pinion Arrangement. 5. Support Rollers: Support Drum Rotation And Alignment. 6. Feeding Hopper: Controlled Feeding Of Wet Material. 7. Cyclone Separator: Separates Dust Particles From Exhaust Air. 8. Induced Draft Fan: Maintains Airflow And Negative Pressure. 9. Control Panel: ControlS Temperature, Rpm, Airflow, And Safety Systems. 10. Blower Specification- 45000-60000 Cfm Motor Specification 15 Hp Hopper Size: Minimum 260 Liter , Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Training- Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Trial Run Shall Be Included. Training For Operators Shall Be Provided. Operation & Maintenance Manual Should Be Provided.