Tender For Electrification Of Canteen At Kupwara C Us University Of Kashmir (Electrical Work) (Advertised Cost Rs. 3.50 Lac)
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrification Of Canteen At Kupwara C Us University Of Kashmir (Electrical Work) (Advertised Cost Rs. 3.50 Lac)
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (of approved make) in surface / recessed PVC conduit of approved make), with modular switch (of approved make), modular plate, suitable GI box etc. as required. Note: Rate of suitable conduit/channel is included in the above description |
| 2 | Wiring for invertor point with 1.5 sq.mm with 1.5 sq.mm earth wire FRLS PVC insulated copper conductor single core cable (of approved make) in surface / recessed PVC conduit of approved make), with modular switch with two sockets (of approved make), modular plate, suitable GI box etc. from DB as required. Note: Rate of suitable conduit/channel and wall cutting and finishing is included in the above description |
| 3 | Wiring for Heating point with 4 sq.mm with earth wire (4 sq.mm) FRLS PVC insulated copper conductor single core cable (of approved make) in surface / recessed PVC conduit of approved make), with modular 15 A switch with 15 A sockets (of approved make), modular plate, suitable GI box etc. from DB as required. Note: Rate of suitable conduit/channel and wall cutting and finishing is included in the above description. |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable (of approved make) in surface/ including recessed medium class PVC conduit |
| 5 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 6 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 7 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 8 | 2 X 16 sq. mm + 1 X 16 sq. mm earth wire |
| 9 | Supply, Installartion, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/ Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accesso`riews including safety pin, nuts, bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc complete as required including remote of the Fan |
| 10 | Providing and fixing of 9-12 inches Sweep exhaust fan vertical type, Wall of plastic body complete with all accessories of approved make |
| 11 | Supplying and laying of following size ISI marked aluminium conductor XLPE insulated cable (of approved make) as per IS 7098, un armoured, served, sheathed 1100 volts grade 3.5 X 50 sq. mm |
| 12 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3.5 X 50 sq. mm |
| 13 | Supplying and fixing of 15 watt square/ round, recess/ surface mount LED down lights with high efficient LED's and glare free opal/ diffusers, commercial lights minimum 100lm/W(of approved make) |
| 14 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board (of approved make), 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) Note: Rate of suitable DB and wall cutting and finishing is included in the above description12 way , Double door |
| 15 | Supplying and fixing , 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker/ RCCB/Voltage and current protection (of approved make)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.6-32 A Single pole MCB |
| 16 | Providing and fixing of 40-63 Amp, 10kA, C-Curve D/P MCB (of approved make) along with enclosure of required size. |
| 17 | Supply of advance maintenance free Chemical Gel Earthing of Dual Pipe Technology (GI) of 3 mtrs long 80 mm dia of outer shell (MS) with the 50 mm dia of inner shell (MS) of 80-100 microns galvanized CHEMRODE filled with highly conducting metallic compounds with the permanent sealings at both the ends with the lead terminal of 50x10mm size at the top. The electrode shall be duly tested and certified by CPRI (Central Power Research Institute), Govt of India for a peak short circuit with standing capacity of 60 KA. including Supply/ fixing of environment friendly rust proof heavy duty weather proof polyplastic earth pit chamber taken upto Main Panel |
| 18 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. but bolt & spring washer spaced at 50mm) |
| 19 | Supply, installation, testing & commissioning of sub main control LT cubical type totally enclosed wall mount type dust damp and vermin proof 415V danger notice plate, connection of incoming and outgoing cables with thimbles stove enameled paint and having following incoming/ outgoing MCCB meter indicators and bus bar arrangements complete as required.A} 1 No 100 Amp 4pole 25 KAB} 1 No surge protection device 3 phase.C} 1 set 160 Amp busbar 4 strips heavy duty aluminum.D} 0 – 500 volt volt meter & indicators. Please Enable Macros to View BoQ information |
| 20 | Supply, installation, testing & commissioning of sub main control LT cubical type totally enclosed wall mount type dust damp and vermin proof 415V danger notice plate, connection of incoming and outgoing cables with thimbles stove enameled paint and having following incoming/ outgoing MCCB meter indicators and bus bar arrangements complete as required.A} 1 No 100 Amp 4pole 25 KAB} 1 No surge protection device 3 phase.C} 1 set 160 Amp busbar 4 strips heavy duty aluminum.D} 0 – 500 volt volt meter & indicators. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender