Tender For Renovation Of Canteen At Kupwara C Us, University Of Kashmir (Civil Work) (Advertised Cost Rs. 6.04 Lac)
Tender Value
6.04 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
12080
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Canteen At Kupwara C Us, University Of Kashmir (Civil Work) (Advertised Cost Rs. 6.04 Lac)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete. |
| 2 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement all work up to all levels. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels.1:3:6 (1Cement: 3 coarse sand:6 graded stone aggregate 20mm nominal Size) Crushed |
| 4 | Centering and shuttering including strutting propping etc. removal of form work in Suspended floors, roofs, landings, balconies, access plat forms, Lintels, beams, plinth beams, girders, bressumers, cantilevers, Columns, pillars, piers, abutments, posts and struts and edges of slabs etc. (M.S. Plates/Ply wood) |
| 5 | 15mm thick cement plaster on brick / concrete wall of mix 1:6 (1cement: 6 coarse sand) |
| 6 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks) |
| 7 | Steel WorkReinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete up to all floors. Thermo mechanically heated bars. |
| 8 | Providing and applying cemement based wall putty 1mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 9 | Wall painting with plastic emulsion paint (two or more coats) of approved brand and manufacture to give an even shade. New work |
| 10 | Removing white or color wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Applying one coat of cement primer of approved brand and manufacture on wall surface. Cement primer. |
| 12 | Finishing with exterior acrylic paint of approved brand and manufacture (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete on all surfaces. Old work |
| 13 | Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places.12mm |
| 14 | Providing and laying polished vitrified floor tiles of size 600x600mm (thickness to be specified by the manufacturer) approved make in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work including spacers (Sample to be approved by EIC) |
| 15 | Providing and laying polished vitrified tiles of size 600x600mm (thickness to be specified by the manufacturer) approved make in all colors, shades as approved by engineer- in-charge laid on chemical (Tilofix) of required thickness including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work including spacers (Sample to be approved by EIC) |
| 16 | Wood Work.Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position.1st Class imported wood. |
| 17 | Providing and fixing 30-35 mm thick glazed shutters for windows and clearstory windows using 8.70kg/Sqm. (3.5mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws. First. Class imported wood. |
| 18 | Providing and fixing 30-35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S. butt hinges with necessary screws.First. Class imported wood. |
| 19 | Providing and fixing of glass pans with wooden fillets of required size wherever necessary. Glass pans 3.5mm thick weighing 8.70 Kg / sqm. |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new steel/wood work including applying priming coat with ready mixed white,pink or grey primer/Seel primer of approved brand and manufacture including sand papering and knotting |
| 21 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 22 | Providing and fixing 30-35 mm thick paneled/ flush door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws Readymade ornamental modular, factory manufactured machine made of hard wood teak finished, of approved quality, color and shade |
| 23 | Providing and fixing of following hardware |
| 24 | Handle 100mm |
| 25 | Tower bolt 100mm |
| 26 | Tower bolt 150mm |
| 27 | Handle 150mm |
| 28 | Sliding Door locable L-DROP |
| 29 | Half brick masonry with bricks of class designation 75 in superstructure up to all floor levels.In cement mortar 1cement: 4 fine sand mortar |
| 30 | Providing and fixing Salem stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610x510mm bowl depth 200mm. (Sample to be approved by EIC) |
| 31 | Providing and fixing of 15mm size chromium plated cast brass angle valve of approved quality (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with wall flange |
| 32 | Providing and fixing C.P. brass bib cock of approved quality (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) 15mm nominal bore with flange |
| 33 | Providing and fixing of 15mm size chromium plated cast brass sink mixer (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) |
| 34 | Providing and fixing of Soap Dish holder of approved quality and make. |
| 35 | Providing and fixing of floor trap of approved quality and make.100mm |
| 36 | Providing and fixing of door bend of approved quality and make.100mm |
| 37 | Providing and fixing of C.P Grating of approved quality and make.100mm |
| 38 | Providing and fixing spindle 15mm dia. All types like washer type/disc type etc. |
| 39 | Providing and fixing of PVC pipe (Type \\"B\\") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation. (Sample to be approved by EIC)100mm dia. Pipe |
| 40 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings, adaptors etc. This includes testing of joints complete as per direction of Engineer incharge. Internal work Concealed fixing the pipe etc. (Sample to be approved by the competent EIC) External work including trenching, refilling etc. |
| 41 | PN-16 pipe , 32mm OD |
| 42 | Internal work Concealed fixing the pipe etc. PN-16 pipe, 25mmOD |
| 43 | Providing and fixing PPR unions (Sample to be approved by EIC) |
| 44 | Providing and fixing PPR ball valves (Sample to be approved by EIC) |
| 45 | Providing and fixing of PVC connection with C.P. brass unions 450mm |
| 46 | Providing and fixing of PVC waste pipe |
| 47 | Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC. |
| 48 | Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness. |
| 49 | Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but including all required tankey nipples and excluding the base support for tank (Syntax/Comfort or equivalent having valid ISI license) complete |
| 50 | Labour for removing old damaged wooden frames etc Please Enable Macros to View BoQ information |
| 51 | Labour for removing old damaged wooden frames etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender