Tender For Revival And Restoration Of Sangram Dar Sahib Shrine At The Entrance Of The Shrine Of Hazrat Sheikh Noor Din Noorani(R.A).
Tender Value
46.45 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
1 days left
EMD
92900
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival And Restoration Of Sangram Dar Sahib Shrine At The Entrance Of The Shrine Of Hazrat Sheikh Noor Din Noorani(R.A).
BOQ
| Sl. No. | Item Description |
| 1 | 1. Restoration of Sangram Dar Sahib Shrine. |
| 2 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above. |
| 4 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete. Budloo |
| 5 | Providing and fixing Tile profile precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required,.incl. ridges valleys complete job |
| 6 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :Thickness above 10 mm upto 25 mm |
| 7 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood |
| 8 | Providing and Fixing of 12mm Thick commercial plywood including cost of nails/ Screws complete job. (Frame work Shall be paid for Separately) |
| 9 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.Dawaz-dal-i-girde |
| 10 | Providing and fixing of Ornamental First class deodar wooded eaves boarding 300x40 mm (nominal size) as per the approved/available pattern and design incl cost of nails Complete job, cost of PU with sealer over prepared base / Finishing to be approved by Engineer-in-charge , complete job |
| 11 | Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer in-charge.With Type SE-Self Extinguishing type 50 mm thick |
| 12 | Providing and fixing of colour coated Rain Gutter of width 15cm with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.0.5 mm thick including G.I inlet mouth |
| 13 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre |
| 14 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 15 | Coupler (75mm) |
| 16 | Bend 87.5° (75 mm ) |
| 17 | Providing and fixing 12 mm thick panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., over & two or more cost of touchwood/Spirit polish, cost of labour, material, carriage, with framework and 10 mm thick ply,complete job .(KD Wood ) |
| 18 | Providing and fixing of Wooden Flooring of superioir quality as directed by Site engineer in carriage & other fittings incl. framework as directed complete job (KD Wood ) |
| 19 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 20 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 21 | Providing and fixing of 30 mm Panelled/Glazed Door Shutter using 1st class Deodar wood with carving on both sides as per the approved pattern, including ISI marked black enamled MS Butt hings with necessary screws complete job |
| 22 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class deodar wood 30mm thick |
| 23 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class deodar wood 30mm thick |
| 24 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 25 | French spirit polishing, one or more coats on old work |
| 26 | Providing and fixing 4 mm thick float glass in fixed panes with budloo wood beadings of reqd width fixed with nails complete ( glass panes to be measured in fitted and finished form) |
| 27 | Providing and fixing traditional ornamental wooden Jaffri made of First Class Deodar Wood, meticulously crafted to approved geometric or floral patterns with specialized interlocking joints and architectural molding, including fixing with 50x12mm ornamental molded wood beading complete at all levels; outer supporting structural frames to be measured and paid for separately. |
| 28 | Engagement of Skilled Mason , helpers and carpenters for easing of doors/windows incl removing of damaged plyboard from doors incl removing of old damaged glass pannes/ wire gauze mesh/M.S Grill from windows and refixing the grills ,welding etc complete, incl necessary reparing of ceiling/ doors/ windows whereever required incl disposing of unserviceable material as directed by the EIC complete job |
| 29 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 30 | Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 31 | Providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building/ structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c, horizontal and vertical tubes joint with cup and lock system with M.s tube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and/ or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened with bracings, runners connecting with the building etc. where ever required. if feasible, for inspection of work at required location with essential safety features for the work men etc, complete as per directions and approval of Engineer-in-charge. Note: - 1) The elevational area of the scaffolding shall be measured for the payment purpose. 2) The payment will be made once only for execution all items of such works. |
| 32 | Reconstruction of the damaged octagonal spire at the top of shrine, after dismantling and removing the existing damaged GI sheet roofing and wooden framework, including providing & fixing complete new spire_ with 1st class kiln-dried deodar wood framework comprising central post, inclined rafters, purlins, bracings as per existing profile & drawings, 12mm thick deodar planking over framework, 0.5mm thick pre-coated green GI sheet roofing of approved shade matching main roof, bitumen felt underlay, ridges, hips, flashings, finial base plate with waterproofing treatment, applying 3 coats mustard oil polish to all wooden members, _re-fixing of existing finial/_alam__ in true plumb, lead sheet packing, all necessary brass screws, bolts, washers, sealants, labour, scaffolding up to spire height, T&P, carriage, leads, lifts etc. complete as per drawing and direction of Engineer-in-charge ( Subject to actual details) |
| 33 | Chipping of unsound/weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 25mm average thickness |
| 34 | Providing and fixing of fine Chisselled Devri tiles in walls, plinths and stairs with 25 mm thickness in 1:3 (1 cement :3 coarse sand) mix cement mortar, including a groove of 15 mm ,carriage of all materials involved and head load and Curing ,one face dressed, complete job |
| 35 | Providing edge moulding to 25 mm thick devri stone stairs, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge |
| 36 | Providing and Fixing of Ornamental Grill of tubularflat Iron with flat Iron, tubular Posts at an interval of 1.80 m centre to centre, including bracing welded with flat iron ring at centre and two in and two out gates of same as grill. Incl priming coat, as directed by EIC |
| 37 | Painting with synthetice namel paint of approved brand and manufacture to give an even shade over red oxide primer on MS surfaces including red oxide primer as directed by EIC: Two or more coats on new work |
| 38 | 2.Construction of partition boundary wall and Reconstruction of back side stair steps near Sangram Dar Sahib Shrine |
| 39 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 40 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge |
| 41 | Providing and laying of stone soling in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/ dressing and carriage of materials from approved nearest sources to site of work complete. |
| 42 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 43 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 44 | Supply and filling of stone Dust/GSB/Nallah Muck in rooms including spreading, levelling, watering, ramming and consolidation, etc complete including all carriages of the same from approved source upto site of work including 50m head load. complete job |
| 45 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 46 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 47 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. |
| 48 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 49 | Providing and fixing of fine Chisselled Devri tiles in walls, plinths and stairs with 25 mm thickness in 1:3 (1 cement :3 coarse sand) mix cement mortar, including a groove of 15 mm ,carriage of all materials involved and head load and Curing ,one face dressed, complete job |
| 50 | Providing edge moulding to 25 mm thick devri stone stairs, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge |
| 51 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 52 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 53 | Providing and fixing of Devri Stones ornamantal cornice in Cement mortar fine chiseled of size 125 mm as directed by EIC including all carraiges and charges involved complete job. |
| 54 | Providing and fixing of Devri Stones ornamantal Conical Cap in Cement mortar fine chiseled of size 500x500 mm as directed byEIC including all carraigesand charges involved complete job |
| 55 | Providing and Fixing of Ornamental Grill of tubularflat Iron with flat Iron, tubular Posts at an interval of 1.80 m centre to centre, including bracing welded with flat iron ring at centre and two in and two out gates of same as grill. Incl priming coat, as directed by EIC |
| 56 | Painting with synthetice namel paint of approved brand and manufacture to give an even shade over red oxide primer on MS surfaces including red oxide primer as directed by EIC: Two or more coats on new work |
| 57 | Disposal of surplus excavated earthto the nearest site for an averge lead of 1km |
| 58 | Carriage of materials by MT from nearest source to site including stacking, loading, unloading, head load complete job. |
| 59 | Stone Aggregate below 40 mm for an avg. lead 29 Km |
| 60 | Sand from Marvel for an avg. lead 29Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender