Tender For Supply Of Furniture And Renovation In Honble C.M. Discussion Room In Basement In Cmo Building At Raj. Sectt. Jaipur
Tender Value
18.94 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
9470
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Furniture And Renovation In Honble C.M. Discussion Room In Basement In Cmo Building At Raj. Sectt. Jaipur = Limited
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Chester Tuffted sofa set made out of Internal frame work in haridwar pine wood, first grade Teak wood base frame with Italian PU Polish. Superior Quality spring, canvas, niwar, screw adhesive etc. including 6\\" HD foam in seat & 5\\" thick back cushioning. Sofa fabric @ 2200/-per mtr of approved sample as per drawing and design. Work complete as per directions of Engineer Incharge. Size :- 90\\" x 40\\" x 33\\" |
| 2 | Supply of Wooden ornamental Center Table .Made out of superior quality Teak Wood turned legs .Top 12mm thick beveled glass above wooden caning work . Including Italian PU Polish as per approved sample. As per drawing and design. Work complete as per directions of Engineer Incharge.Size-60\\"x36\\"x18\\" |
| 3 | Supply of Wooden ornamental Round Side Table made out of superior quality Teak Wood turned curved legs including Italian PU Polish as per approved sample. Work complete as per directions of Engineer InchargeSize-21\\" Dia x 26\\" H |
| 4 | Supply of Wooden Planter made out of 19mm BWP Plywood and 4 mm thick Teak Veneer outside with Italian PU Polish. Inside 1mm thick laminate and bottom aluminium sheet. Work complete as per drawing and design and as per directions of Engineer Incharge Size- 96\\" x 18\\" x 18\\" |
| 5 | Supply of wooden sofa chair made out of 1st class teak wood legs including Italian PU Polish . Upper structure made in Haridwar Pine wood with Niwar, Canvas, Spring, 5\\" High density foam in seat & 3\\" in back, covered with tapestry cloth of @ 3500- per mtr.Work Complete as per approved drawing and design and as per directions of Engineer Incharge. |
| 6 | Supply of imported machine made Carpet of size 5'3\\" x 7'9\\" made of superior quality of polypropelene & polyster, thickness of 10mm of approved design & colour. Work complete as per directions of Engineer Incharge. |
| 7 | Supply of wooden magazine rack made out of 12 mm BWP ply + 4 mm thick teak veneer including Italian PU polish of approved shade as per approved drawing and design and direction of engineer incharge.Size 36\\" x 36\\" x 15\\" |
| 8 | Supply of Superior Quality Texture wallpaper as per approved sample. Work complete as per directions of Engineer Incharge. |
| 9 | Providing and laying wooden flooring with a direct laminated surface treated with aluminum oxide on top of a high-density fiber board with a density of 850 Kg./per Mtr. having a click system tongue and groove joint to secure a long lasting joint. The planks are or termite resistant and water protected with both side lamination Wooden flooring Planks of size 1208 x 194 x 8 mm / 1215x294x8 mm (8mm thick laminated floor class of use 23/31 having a wear resistance level of AC-3 , impact resistance > 9mm, moisture resistance 3-10% as per (EN-424, EN – 438 EN – 425 EN – 417 – 2)or PREN 3329 complete in all respect as per direction of EI |
| 10 | Providing and laying of skirting 89 mm wide having both side laminations with moulding in upper side with matching of floor fixing with nails and screws & fevicol complete in all respect as per direction of EI. |
| 11 | Providing and laying transaction/adaptation profile with fixing of nails, screws & fevicol complete in all respect as per direction of EI. |
| 12 | Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and |
| 13 | bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. |
| 14 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height) |
| 15 | Labour Charges for removing and refixing Aluminium Partitions door including minor repair on alteration in the same. |
| 16 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. |
| 17 | Carpenter 2nd class Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender