Tender For Annual Rate Contract For Variuos Fabrication Job Work Under Rural Sub Division Ratangarh
Tender Value
4 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
2 days left
EMD
8000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Churu → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Contract For Variuos Fabrication Job Work Under Rural Sub Division Ratangarh
BOQ
| Sl. No. | Item Description |
| 1 | Turning of various sizes of CID joints Class 10/ 15 complete set (Labour charges), The joints will be supplied by the Junior Engineer Concern of Department and carting to workshop and after turning of these joints, firm is liable to transport up to Junior Engineer concern's store own his cost 80 mm dia |
| 2 | 100 mm dia |
| 3 | 125 mm dia |
| 4 | 150 mm dia |
| 5 | 200 mm dia |
| 6 | 250 mm dia |
| 7 | 300 mm dia |
| 8 | Threading of GI Pipes different diameter as below (Rate per Mouth Threading). The pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport up to junior Engineer concern's store own his cost. 32 mm dia |
| 9 | 50 mm dia |
| 10 | 65 mm dia |
| 11 | 80 mm dia |
| 12 | 100 mm dia |
| 13 | Cutting of GI/MS/CI pipes of any class as below (Rate per Mount - one cutting only making two pieces). The pipes will be supplied by the Department. 32 mm dia |
| 14 | 40 mm dia |
| 15 | 50 mm dia |
| 16 | 65 mm dia |
| 17 | 80 mm dia |
| 18 | 100 mm dia |
| 19 | Welding of MS/ GI/ CI pipes and other material by Electric Welding this includes all the material like welding rods/ equipement like welding machine/ generater, if required for job. At workshop |
| 20 | on site |
| 21 | Providing, fabrication of Mild steel plane ended/ flanged specials like Tees, Bends, Reducer, Enlarges, plugs, Tail Pieces and Blank Flange made from MS Pipes, Ms Sheet strip and MS Sheet of required sizes by welding, cutting, and treading asp er site conditions and as directed by the Engineer-In-Charge complete in all respect. |
| 22 | Making Hole (only labour charges) by drill machine in MS/CI/DI pipes and specials per hole rate Up to 12 mm dia Hole |
| 23 | Above 12 mm dia Hole |
| 24 | Making of GI Assembly pipe for various sizes including, threading, tightening, welding of flange and welding of MS Patti, holes and cable grove making as per required length of 3.00 M/6.00 M (Pipes and flange shall be provided and carting these to workshop by the department) Length of ms strip will be 100 mm, width - 20 mm and thickness - 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly pipes, the firm is liable to transport these to concern's divisionsal store own his cost. 50 mm |
| 25 | 65 mm |
| 26 | 80 mm |
| 27 | Supplying of Ms Rods for different size of sluice valve and shoub be supplied as according to size of old rods including material and finishing for the following size. Sluice Valve size 80 mm |
| 28 | Sluice Valve size 100 mm |
| 29 | Sluice Valve size 125 mm |
| 30 | Sluice Valve size 150 mm |
| 31 | Sluice Valve size 200 mm |
| 32 | Sluice Valve size 250 mm |
| 33 | Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of check Nut including material for the following sizes. Sluice Valve size 80 mm |
| 34 | Sluice Valve size 100 mm |
| 35 | Sluice Valve size 125 mm |
| 36 | Sluice Valve size 150 mm |
| 37 | Sluice Valve size 200 mm |
| 38 | Sluice Valve size 250 mm |
| 39 | Providing of u plate ( U stand) for different sizes of sluice valve and should be supplied as according to size of old U plate including material for the following sizes. Sluice Valve size 80 mm |
| 40 | Sluice Valve size 100 mm |
| 41 | Sluice Valve size 125 mm |
| 42 | Sluice Valve size 150 mm |
| 43 | Sluice Valve size 200 mm |
| 44 | Sluice Valve size 250 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender