Tender For Special Repair To Bldg No Sp-12 At Mil Stn Katihar Under Age (I) Katihar.
Tender Value
19 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
12 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Katihar → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Sp-12 At Mil Stn Katihar Under Age (I) Katihar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frame exc 1.5 Sqm n.exc 4 Sqm each with shutter (without taking off shutter from the frame) incl dismantling of PCC bed blocks for hold fast complete all as specified and directed by Engr-in-charge |
| 2 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutter (without taking off shutters from the frame) incl dismantling of PCC bed blocks for hold fast complete all as specified and directed by Engr-in-charge |
| 3 | S&F 105X60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc complete all as specified and directed by Engr-in-charge |
| 4 | S&F 125X60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc complete all as specified and directed by Engr-in-charge |
| 5 | Taking down steel tubing and connections, including cleaning for refixing or removal of 15mm bore complete all as specified and directed by Engr-in-charge |
| 6 | Taking down steel tubing and connections, including cleaning for refixing or removal of 20mm borecomplete all as specified and directed by Engr-in-charge |
| 7 | Cutting chases, pinning in. brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girt complete all as specified and directed by Engr-in-charge |
| 8 | Supply and fixing for 15mm dia Unplasticised PVC pipes of pressurerating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed by Engr-in-charge |
| 9 | Supply and fixing for 20 mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors, including taking down old unserviceable pipe complete all as specified and directed by Engr-in-charge |
| 10 | S&F 30mm thick flush shutters, solid core construction, with MDF board with one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engr-in-charge |
| 11 | S&F of factory made plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated complete all as specified and directed by Engr-in-charge |
| 12 | M&L 35mm thick 2nd class hard wood glazed and skeleton shutter factory made open revated and prepared to receive glass, guage etc with plain chamfered or rounder mitred and rebated, sash bars in any numers divided into squares edges of framing, plain or chamfered or rounded complete all as specified and directed by Engr-in-charge |
| 13 | S&F Mild steel window with side hung shutter incl box type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-charge |
| 14 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded.complete all as specified and directed by Engr-in-charge |
| 15 | S &F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed by Engr-in-charge |
| 16 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge |
| 17 | S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-charge |
| 18 | S&F 3.00mm thick plain sheet glass, ordinary quality fixed with aluminium frame work n. exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-charge |
| 19 | S&F 3.00mm thick figured sheet glass, ordinary quality fixed with aluminium frame works n. exc 0.5 sqm in each panecomplete all as specified and directed by Engr-in-charge |
| 20 | M&L preparing new steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide complete all as specified and directed by Engr-in-charge |
| 21 | M&L preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and directed by Engr-in-charge |
| 22 | S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium ally complete all as specified and directed by Engr-in-charge |
| 23 | S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-charge |
| 24 | S&F Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm size complete all as specified and directed by Engr-in-charge |
| 25 | S&F for 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Engr-in-charge |
| 26 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles from site complete all as specified and directed by Engr-in-charge |
| 27 | M&L for Vitrified Ceramic light shade coloured tiles 10mm thick (square/rectangular ) polished, area of each tiles n exc. 36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour to match incl 15 mm screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed by Engr-in-charge |
| 28 | M&L for Vitrified Ceramic light shade coloured tiles 10mm thick (square/rectangular ) polished, area of each tiles n exc. 36 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour to match incl 10 mm screed bed or bedding layer of CM 1:4 for laying of floor finishes ccomplete all as specified and directed by Engr-in-charge |
| 29 | M & L for non skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and directed by Engr-in-charge |
| 30 | M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 cm thick backing with cm 1:4 complete all as specified and directed by Engr-in-charge |
| 31 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge |
| 32 | M&L Rendering 15 mm thick on other than fair faces of brick work or concrete sur-faces in cement mortar 1:6 for finished even and fair complete all as specified and directed by Engr-in-charge |
| 33 | M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement (WPC will be measured and paid separately) complete all as specified and directed by Engr-in-charge |
| 34 | Supply only Integral water proofing compound complete all as specified and directed by Engr-in-charge |
| 35 | M&L for prepration of new plastered surfaces of wall applying two coat of oil emulsion distemper over 1 mm th wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed by Engr-in-charge |
| 36 | M&L for prepration of newly plastered surface and appplying two coats of exterier acrylic paint (wheather coats) over 1mm thick wall care putty etc complete all as specified and directed by Engr-in-charge |
| 37 | Complete removal of existing treatment and appplying two coats of exterier acrylic paint (wheather coats) over 1mm thick wall care putty etc ccomplete all as specified and directed by Engr-in-charge |
| 38 | Complete removal of existing traetment of wall and treated with 1mm of wall care putty and applying two coat of oil bound distemper .complete all as specified and directed by Engr-in-charge |
| 39 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings of any gauge complete all as specified and directed by Engr-in-charge |
| 40 | S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-charge. |
| 41 | S&F of Pre-painted galvalume aluminum zinc coating GI based plane steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-charge. |
| 42 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge |
| 43 | S&F roof trussess/framed, trussed, purlins crane gantries, rails and fastemings and heavy bracket framing (Beam, tee, angle, chanel or flat sections) encluding distance pieces, cleats etc of Gde-Fe-240 complete all as specified and as directed by Engineer-in-charge. |
| 44 | S&F in repair Stop cock 15mm of chromium plated with long shank and cup (concealed type) screw down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge |
| 45 | S&F as in repair bib tap 15mm bore fancy type chromium plated in repair incl CP nipple with socket.complete all as specified and directed by Engr-in-charge |
| 46 | S&F angular stop cock 15mm bore chromium plated in repair complete all as specified and directed by Engr-in-charge |
| 47 | S&F Pillar tap 15mm bore fancy type chromium plated as in repair complete all as specified and directed by Engr-in-charge |
| 48 | S&F in repair water closet (Squating pattern) of vitreous china squatting pan of pattern \\"ORRISA\\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl connectio to trap and flushing pipe and anti syphon pipe etc complete incl trap set in and incl concrete complete all as specified and directed by Engr-in-charge |
| 49 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle complete all as specified and directed by Engr-in-charge |
| 50 | S&F in repair Vitreous China wash basin, white, flat back of size 550x 400 mm incl cutting for and pining, in ends of brackets or erecting stand as in repair complete all as specified and directed by Engr-in-charge |
| 51 | Demolition of cement Concrete of roof , floor (othr than ground floors), beam, staircase,landing, chajjas and similar suspended work (reinforced) complete all as specified and directed by Engr-in-charge |
| 52 | M&L for reinforcement cement concrete type B1 1:2:4 ( 20 mm graded aggregate) in slab supported on walls, beam and columns in floor, roofs, landing, balconies, conopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge |
| 53 | M&L for Formwork rough finished surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engr-in-charge |
| 54 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge |
| 55 | M&L for 18 to 20 mm mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge |
| 56 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with 30 mm waste fittings, brass CP fo glazed wire sink , basin etc with long screw shanks and fly nut ,flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge |
| 57 | S&F in repair swivel shower rose of chromium plated any colour (minimum weight 40 gms) for fixing with 15mm dia steel pipe complete all as specified and directed by Engr-in-charge. |
| 58 | S&F in repair PVC connection 15mm size with PTMT nuts,600mm length. (Make: Prayag) complete all as specified and directed by Engr-in-charge |
| 59 | S&F in repair towel rail 600mm, 20mm dia, D type of brass chromium plated fixed with and including CP brass screws complete all as specified and directed by Engr-in-charge |
| 60 | S/F cast iron floor trap 75 mm dia outlet , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engr-in-charge |
| 61 | S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor incl demolition of old pipes, complete all as specified and directed by Engr-in-charge |
| 62 | PVC 75mm(SWR) dia bends any radius complete all as specified and directed by Engr-in-charge |
| 63 | Demolition of brickwork built in cement mortor including all quoins arches, pillars etc complete all as specified and directed by Engr-in-charge |
| 64 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 incl demolition of old bricks complete all as specified and directed by Engr-in-charge |
| 65 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level)complete all as specified and directed by Engr-in-charge |
| 66 | Providing 75mm thick cement concrete 1:3:6 type C-2( using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement ccomplete all as specified and directed by Engr-in-charge |
| 67 | S& F in repairs stainless steel kitchen rack of minimum size 600 x 900x250mm fixing complete as per directed complete all as specified and directed by Engr-in-charge |
| 68 | M&L 18 mm thick moulded PVC sheet plelaminated economic/economic colour both side , cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf shutter including fixing with 1.25\\" Mild steel screw to the frame with the channel , complete the work according directions of Engineer-in-Charge, Including dismantling of any type of Board complete all as specified and directed. (Make - Rahjshri / Kumar archtech ) complete all as specified and directed by Engr-in-charge |
| 69 | M&L 9 mm thick moulded PVC sheet plelaminated economic/economic colour both side , cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf shutter including fixing with 1.25\\" Mild steel screw to the frame with the channel , complete the work according directions of Engineer-in-Charge, Including dismantling of any type of Board complete all as specified and directed. (Make - Rahjshri / Kumar archtech ) complete all as specified and directed by Engr-in-charge |
| 70 | S&F telescopic drawer channel 20 inch steel silver chrome plated fixed with mild steel screw to the frame with cannel complete all as specified and directed by Engr-in-charge |
| 71 | S&F sainless steel handles 100 mm fixed with screw complete all as specified and directed by Engr-in-charge |
| 72 | Auto close stainless steel (clip hinges) 75mm size suitable for cupboard shutter fixed in position with stainless steel screws, fixed as in repairs complete all as specified and directed by Engr-in-charge |
| 73 | S&F of 1000 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling old one and provn of all necessary fittings ccomplete all as specified and directed by Engr-in-charge |
| 74 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers.complete all as specified and directed by Engr-in-charge |
| 75 | S&F in repairs of 40mm bore waste coupling of PTMT (half or full threaded) minimum weight 60gms complete all as specified and directed by Engr-in-charge |
| 76 | S&F in repairs of 32 mm bore waste coupling of PTMT (half or full threaded) minimum weight 60gms complete all as specified and directed by Engr-in-charge |
| 77 | S&F in repair curtain rails/harrison rails mild steel, chromium plated with fixing brackets, stops, rollers etccomplete all as specified and directed by Engr-in-charge |
| 78 | M&L Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charge |
| 79 | M&L for 100 mm thick PCC 1:4:8 type D-2 (40 mm graded crushed stone aggs) as in in sub base finish even and rough to receive to top layer complete all as specified and directed by Engr-in-charge |
| 80 | M&L Providing cement concrete 1:2:4 type B-1 using 12.5 mm graded aggregate as in kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed by Engr-in-charge |
| 81 | Material and labour for point wiring for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper multistranded conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper multistrand conductor cable 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick with 3mm thick hylum laminated/bakalite sheet cover for mounting switch, socket, fan regulator,etc after and including taking down of old existing point wiring including fixtures and fittings such as switch, ceiling rose, holders, socket, etc and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. |
| 82 | All as per item No 81 here-in-before but for 3 pin 6 Amps socket outlet on the same board with 1.5 sqmm cable complete as specified and directed. |
| 83 | All as per item No 81 here-in-before but for 5 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed. |
| 84 | All as per item No 81 here-in-before but for one 5 pin 6/16 Amps switch socket combination on independent board with 2.5 Sqmm PVC insulated unsheathed copper cable multistrand conductor 1100 volts grade and 2.5 sqmm copper conductor cable as earth continuity conductor complete as directed. |
| 85 | Supply and fixing switch flush type 6 amps 230 volt single pole one way complete all as specified and as directed by the Engr-in-Charge. |
| 86 | Supply and fix socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed. |
| 87 | Supply and fix switch socket combination multipurpose 2 in 1,5 pin 6 amps 230 volt flush type complete all as specified and as directed by the Engr-in-Charge. |
| 88 | Supply and fix 6/16 Amp switch socket combination multipurpose 2 in 1,5 pin, 230 volt flush type complete all as specified and as directed by the Engr-in-Charge. |
| 89 | Supply and fix bell ding dong AC 230 volts, single pole complete all as specified and as directed. |
| 90 | Supply and fix bell push flush type 5 Amps complete all as specified and as directed by the Engr-in-Charge. |
| 91 | Supply and fix ceiling rose surface bakelite three terminal 65 x 50mm complete all as specified and as directed by the Engr-in-Charge. |
| 92 | Supply and fix eletronics fan regulator step type AC 240 volt 50 Hz complete all as specified and directed by the Engr-in-Charge. |
| 93 | Supply and fixing as in repair for LED Tubelight 1x20 W (4 Ft) with extruded aluminium housing , PC diffuser and inbuilt driver including necessary electric connection from ceiling rose to light fitting incl replacement of old tube light fitting complete all as specified and as directed. |
| 94 | Supply and fixing LED light fittig mirror type with hih out put diffuser 2 feet, 10 watt 230V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete of Havells make or equivalent in BAJAJ/HPL. |
| 95 | Supply and fixing LED bldg security light fitting 35 watt 230V, AC outdoor type with high pressure die cast aluminium hosing and head resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete of make /HPL/Bajaj/Havells. |
| 96 | Supply and fixing as in repair MCB DB SPN 8 ways Double door with 200 Amps rated bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. |
| 97 | ditto all as per item No.96 above but for SPN 4 Way complete all as specified and as directed by the Engr-in-Charge. |
| 98 | Supply and fixing in repair MCB 63 Amps, SPN, 240 Volt \\"C\\" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. |
| 99 | Supply and fixing in repair MCB 06 - 32 Amps, SPN, 240 Volt \\"C\\" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. |
| 100 | Supply and fixing as in repair MCB 6 to 32 Amps, single pole, 240 Volt \\"C\\" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. |
| 101 | Supply and fix sub-main wiring (PVC casing caping) for main DB's to Sub DB's with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLS), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLS), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing caping and including taking down existing one complete all as specified and as directed by the Engr-in-Charge. Note : Three runs of 4 Sqmm cable shall measured as one length. |
| 102 | Taking down the ceiling fan & exhaust fan, servicing/ greasing, oiling the fans including changing minor parts , after complete the spl repair bldg wk re-fixing the fans, all as specified and directed by the Engineer-in-charge. |
| 103 | S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 Volt, complete, fixed in repairs. Make : Legrand / Havells / ABB Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender