Tender For Special Repair To Bldg No S-123 And Certain Revenue Work At Masimpur Mil Stn
Tender Value
43.80 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
8 days left
EMD
87600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No S-123 And Certain Revenue Work At Masimpur Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2026 | BOQ revised | BOQ | 05-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 3 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 4 | Demolition of reed lathing, single or double including battens and plaster or chiken wire lathing all as specified. |
| 5 | Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed. |
| 6 | Dismantling asbestos cement sheet ( Semi corrugated, corrugated sheeting) any gauge or any thickness as in roof covering etc. including all necessary staging / scaffolding, etc. as required complete all as specified and as directed. |
| 7 | Dismantling of timber scantling 40 Sqcm and over in section, in any position in unframed work complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed. |
| 9 | Surface dressing n exc 15 cm deep and getting out in soft / lose soil complete all as specified and directed. |
| 10 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed. |
| 11 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified and directed. |
| 12 | Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed. |
| 13 | Excavating in post holes ( or similar holes) each n exc 0.50cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, as insoft/ loose type of soil complete all as specified and directed. |
| 14 | M & L for fine river sand fillings under floor or in foundation including watering levelling and consolidation complete all as specified and as directed by Engineer -in-charge.Note : Thickness of sand filling after consolidation will be measured. |
| 15 | M&L for Hardcore of broken stone boulder of gauge exc 40mm and n exc 63mm deposited spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 16 | M&L for PCC (1:4:8), Type D2 using 40 mm graded stone aggregate as in foundations, sub-base, filling and mass concrete complete all as specified and directed. |
| 17 | M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundations, sub-base,filling and mass concrete complete all as specified and dirceted |
| 18 | M & L for 150mm thick plain cement concrete (1:2:4) type B2 using 40mm graded stone aggreagate for base in floor complete all as specified and directed. |
| 19 | M & L for plain cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in bed blocks, coping , cills, steps, kneelers, bed plates, apex stones kerbs and similar works including necessary formwork complete all as specified and directed. |
| 20 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 21 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 22 | M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. |
| 23 | M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in column, pillars, piers, posts, and struts complete all as specified and directed. |
| 24 | M & L for Mild steel TMT Bar 10mm dia and over, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 25 | M & L for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 26 | M & L for brickwork with subclass 'B' straight or curved on plan exc 6 m mean raduis, built in CM (1:6) complete all as specified and directed. |
| 27 | M & L for brickwork of usable old brick with subclass 'B' straight or curved on plan exc 6 m mean raduis, built in CM (1:6) complete all as specified and directed. |
| 28 | S & F for GI wire netting 0.71mm dia and 12mm mesh lathing to wood of metal studding joint etc in wall ceiling stanchion, beam etc included all laps cutting and waste. |
| 29 | M & L rendering 10mm thick in cement mortar (1:6) on other side of lathing surface finished fair and even complete all as specified and directed |
| 30 | M & L rendering 10mm thick in cement mortar 1:6 on any faces of brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 31 | M & L rendering 15mm thick in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished even and fair without using extra cement complete all as specified. |
| 32 | M & L rendering 15 mm thick cement mortar 1:4 on one side lathing surfaces in two layer each of 10+5 mm thick & water proofing compound mixed with second layer @ 3% finished fair and even complete all as specified. (Note :WPC measured separately). |
| 33 | M & L rendering 15 mm thick cement mortar (1:4) on any faces of brick wall or concrete surfaces, in two layer each of 10+5 mm thick & water proofing compound finished even and fair without using extra cement complete all as specified. (Note :WPC measured separately). |
| 34 | M&L for rendering 10 mm thick cement mortar 1:4 on any faces of brick walls and concrete surface, finished even and fair without using extra cement complete all as specified. |
| 35 | Supply only integral water proffing compound WPC complete all as specified. |
| 36 | M&L pre-polished machine pressed precast concrete interlocking paver block any shape any size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laying in floor over 50mm thick sand filling with proper jointing pointing with grey cement and pigment complete all as specified and as directed.Note : Qty of sand shall be measured and paid seperatly in respective item. |
| 37 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 38 | S &F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 39 | S &F Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 40 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails ,posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats nuts bolts plates (plain or chequered) etc. complete all as specified and directed. |
| 41 | Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers,hold fasts, bands, straps, wall ties, plain angle cleats, eaves board frame and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 42 | Supply chain link mild steel galvanised fencing of mesh size 75mm x 75mm (design of mesh shall be approved by GE) made of Gl wire not less than 4mm dia including line wires, to any type of standards, rails, straining bolts. less than 4 kg/sqm) including provision of binding wire complete all as specified and directed. |
| 43 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining Sqm bolts, etc. including provision of binding wire and fixed complete all as specified and shown on drawings |
| 44 | M&L for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe-290-GdeE-165 complete all as specified & as directed. |
| 45 | M & L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, Diameter of neck 12 mm and n.exc 5cm long complete all as specified. |
| 46 | M & L of 10 mm dia mild steel round bars as in ties to chain link fencing incl necessary bending etc. complete all as specified. |
| 47 | S & F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing 100 and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised MS wire staples or steel pin etc complete all as specified and directed. |
| 48 | S&F concertina coil (reinforced punched barbed tape single layer ) fixed on 'Y' shaped angle over security fencing complete all as specified and directed. 1. Diameter of concertina coil: 600 mm.2. Numbers of turns in concertina: 50 to 53 turns.3. Weight of each coil- 9.5 to 10 kg.4. Coverage per coil- 6 Rm.5. Central core Wire - Made of high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanized (conforming to IS 2629) with diameter 2.59mm_+0.05mm, UTS 145-160 kg/sqmm, zinc coating 250-300gms/sqm.6. Strip:-Electro galvanised steel strip 0.5 mm_+0.02mm thick, width 19mm (before wrapping on central core wire) conforming to IS-1573, zinc coating-120gms/sqm and bituminized dipped, width of barbs 11.5mm pitch of barbs 25.4mm_+0.20mm.7. Clips :-AISI 304-1.5 mm thick C and U clips. 'C' special type for fixing coil and RBT wire joining.8. No of clips 125 for each coil.9. Handle and spikes to |
| 49 | M & L for second class harwood in scantlings timber framed and fixed for wrought in section, in any position complete all as specified and directed. |
| 50 | S &F 110mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 51 | M & L for applying two coats of white wash on new surface of wall including preparation of new plastered surface complete all as specified and directed. |
| 52 | M & L for preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using roller complete all as specified and directed. |
| 53 | M & L for preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using roller complete all as specified and directed. |
| 54 | Preparation of new steel surfaces surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces complete all as specified. |
| 55 | M & L preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 56 | M & L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 57 | E & M Division items |
| 58 | Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc including removing from site for taking credit and making good to disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed. |
| 59 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. |
| 60 | Dismantling old unserviceable main switches, sheet metal enclosures DB including MCBs etc and removing from site for taking credit incl making good to disturbed surface of wall as per existing specification complete all as specified and as directed. |
| 61 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty,PVC casing caping including all accessories etc ISI marked, with modular metal flush box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch. |
| 62 | S&F switch piano flush type button single pole one way 5 Amps all as specified and directed. |
| 63 | S&F ceiling rose surface bakelite with three terminals all as specified and directed |
| 64 | M & L for submain wiring with two single core 1.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed.Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length. |
| 65 | S & F wall mounted, compact LED batten 20 watt, 220 V, efficiency 125 lm/w alluminium housing AC decorative box type with driver and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 66 | S & F flood light round shape ( Highbay light ), LED luinaire 100watt 230V AC indoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and clamp SAUCER NEXTGEN HIGHWAY next generation , energy saving, enviroment friendly & robudthighbay LED with PDC housing suitable for ceiling (Surface/suspended) mounted with system efficacy upto 150 Lm/W complete all as per directed |
| 67 | S&F bldg security light, LED luminaire 30 watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. |
| 68 | S&F sheet metal enclosure powder coated single phase and neutral (SPN) DB for fixing of MCBs, 4 way double door with aluminum bus bar 100 Amp including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. |
| 69 | S&F MCB SPN of capacity 6-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 70 | S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 71 | S & F GI tube light grade 25 mm bore with fittings for protection of cable, laid under road for passing cable complete all as specified and directed. |
| 72 | Supply, laying and testing in trenches or fixing on wall or passing through pipe 1100 volts grade heavy duty LT cable XLPE Insulated multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed cross sectional area 10sqmm 2 core complete as per specification properly clamps on wall and connection at end point with all legs glands etc complete all as specified and directed. |
| 73 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed. |
| 74 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 30cm thick complete all as specified and directed. |
| 75 | Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 76 | M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.Note : Thickness of sand cushioning after punning down will be measured. |
| 77 | M&L for bricks sub-class 'B' designation 75 of size 230X115X75mm laid in trenches for cable protection complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender