Tender For Construction Of Administrative Block Including Chowkidar Room At Industrialestate Pulwama.
Tender Value
50.94 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
13 days left
EMD
1.09 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Administrative Block Including Chowkidar Room At Industrialestate Pulwama.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in Excavation in all kinds of soil by mechanical means in foundation trenches including dressing of sides and ramming of bottom with all leads and lifts including disposal of surplus soil within a lead of 50m from cutting edge as per direction of Engineer in charge |
| 2 | Providing and laying of stone soling hand packed, including carriage of same from approved source upto site of work complete |
| 3 | Providing and laying in position cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate,40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials |
| 4 | P/L in position Reinforced cement concrete in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate,20mm nominal size) excluding the cost of centering and shuttering, including carriage of all materials from approved |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for column |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood |
| 9 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for a) Suspended floors, roofs, landings, balconies and access platforms |
| 12 | b) Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 15 | 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 16 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 17 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete.50 mm thick with 20mm nominal size stone aggregate. |
| 18 | Providing and fixing strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick |
| 19 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 21 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class kail wood 30 mm Thick |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class kail wood 30 mm |
| 23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood |
| 24 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 26 | Providing and fixing of hardware items of colouredaluminium of Gaylord approved quality including loading ,unloading and all necessary fittings etc complete job as per directions of engineer incharge a) Tower Bolt 150 mm Tower Bolt 100 mm |
| 27 | b) AluminiumAldrop Bolt 8\\" |
| 28 | long Handles150 mm |
| 29 | Handles 100 mm |
| 30 | Hooks (150mm |
| 31 | Tower Bolt 100 mm |
| 32 | Stopper |
| 33 | Link Rod Lock 8\\" |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete Kajaria, Somany made |
| 35 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. Kajaria, Somany made |
| 36 | Providing and fixing of 4 mm thick ordinary glass panes in wooden shutters, ventilators shutters including cost of beading (kail wood),nails etc complete job |
| 37 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever |
| 38 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 39 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 40 | Providing and fixing of white vitreous china wash basin oval type (counter top) 56cm x 41cm. 32mm CP brass waste of standard pattern including cutting and making good the whereever required |
| 41 | Providing and Fixing of CP fittings of standard make and Quality Jaquar a) Bib Cock Short Body |
| 42 | Bib Cock Long Body |
| 43 | Basin Mixer |
| 44 | Wall Mixer |
| 45 | Two in one bib cock |
| 46 | Haealthfocet with Holder |
| 47 | Grating |
| 48 | Angle Value |
| 49 | Towel Rod( 600 long) |
| 50 | Towel Ring |
| 51 | Soap Dish |
| 52 | Paper Holder |
| 53 | Ball Cock |
| 54 | Mirror of Rectangular shape 600x 450 m |
| 55 | unplasticized PVC connection pip |
| 56 | PVC Waste pipe Flexible pipe 32 mm |
| 57 | GI Ball Value (Zoloto make) 32mm dia |
| 58 | GI Ball Value (Zoloto make) 40mm dia |
| 59 | GI Ball Value (Zoloto make) 50mm dia |
| 60 | GI Tanky Nipple 50mm dia |
| 61 | Providing and Fixing of Hot water Heater geyser of approved quality (Recold,Havels, jaquar) brand including all fittings PVC connection and values etc Complete job of 50 liter capacity |
| 62 | Providing fixing of P.V.C triple layer water storage tank of various capacity as per requirement including installing ,transportation all leads and lifts etc of approved Brand like Sintex ,Comfort complete job. |
| 63 | Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep forsingle pipe line |
| 64 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, |
| 65 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work exposed on wall with clamps at 1.00 meter spacing a)20mm dia |
| 66 | b) 25mm dia |
| 67 | Providing and fixing P.V.C fittings and clamps, including cutting and making good the walls etc. including loading ,unloading and all necessary fittings etc. complete job finolex,prince Etc. of Type B a) PVC Pipe 110mm Dia |
| 68 | PVC Pipe 75mm Dia |
| 69 | PVC Pipe 50mm Dia |
| 70 | Door Tee 4\\" |
| 71 | Door Tee 3\\" |
| 72 | Floor trap 4\\" |
| 73 | P trap |
| 74 | S trap |
| 75 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 76 | Supplying and filling in plinth with fine sand/G.S.B. under floors including, watering, ramming, consolidating and dressing complete. |
| 77 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 78 | Wiring for the following light points with 1.5Sqmm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box and earthing of fixtures and the outlet box with 1.5sqmm PVC insulated copper conductor stranded flexible FRLS wire.a). One light controlled by 6 Amp Switch |
| 79 | Wiring for 250 volts single phase and neutral 16 Amps switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and design in 1.6mm thick G1 boxes with grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire. |
| 80 | Wiring for 230v ac, 5pin 5/6 amps switched socket outlets for light duty power with 230v ac 5/6amps, SP switch and socket, on same modular grid plate mounting with 2x2.5sqmm stranded copper conductor FRLS insulated 1100v grade wire in 25mm dia, 1.6mm thick rigid MS conduit/Pvc with earthing of 3rd pin by 1/1.5 sq mm stranded copper conductor FRLS insulated green 1100v grade wire with lug complete. |
| 81 | Wiring for ceiling/wall Fan points same as above in item No 1. but controlled by electronic stepped regulator 200 watts and 5A control switch and 15mm dia circular or hexagonal in 1.6mm thick MS zinc passivity sheet steel body and 12mm dia MS bar hook complete with white ,3mm thick 200mm dia laminated circular cover |
| 82 | Supplying installation testing and commissioning of exhaust fan complete connection as required |
| 83 | Supplying installation testing and commissioning of celling fan Crompton Usha or equalent make. |
| 84 | Supplying installation testing and commissioning of 12 watt slim round LED light of Vipro make complete fitting as required. |
| 85 | a)Supplying and installation testing and commissioning of 6 way TPN DB box |
| 86 | Supplying and installation testing and commissioning of following mccb,sa)10 to 32 amp mcbSp |
| 87 | b) 40 to 63 amp DP |
| 88 | Wiring for circuits for light/fan/bells/exhaust fans/ AC’s etc with following size FRLS PVC insulated 1100v Grade multi strand copper conductor wire, FRLS green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. (without PVC, Conduits)a) ) 2x2.5+1x1.5 Sq.mm stranded copper FRLS PVC insulated for lighting circuits |
| 89 | 2x1.5 Sq mm for inverter circuits |
| 90 | Supplying and laying of sub main wiring from panel to distribution boards a)4x10 Sq. mm +1x6 Sq mm stranded copper conductor FRLS PVC insulated for heating circuits |
| 91 | 4x 6 Sq mm +1x2.5 Sq mm stranded copper conductor FRLS PVC insulated for lighting circuits |
| 92 | 2x6+1x2.5 Sq mm for Ac Circuits including industrial socket or 32 AMP DP Switch |
| 93 | Supply and fixing of 2mm thick pvc conduits in following sizes include cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting, chases and making good or surface mounted including all fixing hardware. 25mm dia |
| 94 | Design fabrication assembling supply installation testing and commissioning of LT sub main panel suitable for 415 V 3 phase 50 HZ 4 wire power supply system panel shall be fabricated out of 2mm thick CPCA sheet steel in cubical formation compact mobilize in form 3d construction wall mounted and shall be dust and vermin proof 3mm thick cable gland plate shall be provided both at the top and bottom of the panelMCCB 150Amp 35 KA 01 NoMCCB 63 Amp 0 25 KA 02 NoBus bar 150 Amp 01 SetCT coil 02 NoChangeover 100 Amp 01 NoDigital Voltmeter 01 NoDigital Ammeter 01 No |
| 95 | Supplying and Laying of 25 Sq mm 3.5 C Al Armored cable of Havel’s make |
| 96 | Rate for chemical earthing using electrode of size 50mm dia 2 meter long connected with 32x4mm GI internal strip complete with excavation, civil works, RCC cover with back fill compound. The voltage between neutral and earth not to exceed 2 volts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender