Coal and Mines Boards / Undertakings / PSU Closing in 11 days TDR #57026643

Bids Are invited for Custom Bid For Services - Installation Commissioning Testing And Trial Run Of Black Diamond Make 400Tph Feeder Breaker With Primary And Secondary Crusher Along With Belt Conveyor At Dhoptala Ocm Ballarpur Area - Fabrication Of Fo

Issued by Boards / Undertakings / PSU · Chandrapur, Maharashtra
Tender Value
1.73 Crore
Estimated cost
Bid Submission
04 Sep 2026
11 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Custom Bid For Services - Installation Commissioning Testing And Trial Run Of Black Diamond Make 400Tph Feeder Breaker With Primary And Secondary Crusher Along With Belt Conveyor At Dhoptala Ocm Ballarpur Area - Fabrication Of Foundation & Support Steel Structure For Primary & Secondary Crusher Including Chassis Complete With Crusher & Chain Conveyor System , Feeding Hopper, Discharge Chute, Cabin , Rock Breaker, Panels , Secondary Crusher Etc And Steel Fabricated Retaining Wall , With Railing And Applying Approved Coat Of Steel Primer For Installation Of Black Diamond Make Feeder Breaker(For Primary & Secondary Crusher Complete) , Painting With Synthetic Enamel Paint Of Approved Brand , Complete Supply And Installation Of Control Cables (12 Core X 1.5 Sq.Mm.0 From Control Panel To Operator Cabin (Material+Labour) , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Foundationtrenches Or Drains. , Supplying And Filling In Plinth With Sand And Rock Under Floors, Including Watering, Remaining, Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:3:6 (1 Cement : 3 Fine Sand : 6 Graded 20Mm Nominal Size). , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Works Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Course Sand :3 Graded Stone Aggregate 20Mm Nominal Size). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Base Of Columns Etc. For Mass Concrete. (Material+Labour). , Centering And Shuttering Including Strutting Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts (Material+Labour). , Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More (Material+Labour) @ 130 Kg./ Cum , Providing And Fixing Mild Steel Round Holding Down Bolts With Nuts And Washer Plates Complete And Insert Plate Where Required. (Material+Labour). , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering Lead Up To 50M And For All Lift Upto 1.5M (Material + Labour) , Providing Corrugated Gs Sheet Roofing Inlcuding Vertical Curved Surface Fixed With Ploymer Coated J Or L Hooks ( For Tipping Shed Over Hopper) , Dismantling And Shifting Of Secondary Crusher & Accessories Of Conveyor Belt Including Conveyor Pulleys, Drive Structure, Drive Unit, Electrical Panels, Conveyor Belt, Idlers, Rollers Etc. Which Is Available At Site.(Vehicle And Crane Will Be Provided By The Department) , Installation, Commissioning Testing And Trial Run Of One No. Black Diamond Make Feeder Breaker Complete With All Accessories. (Primary + Secondary+ Conveyor Belt Complete Including Chassis,Crusher, Drive Units, Hoppers, Chute, Electrical Panels Etc & Conveyor Belt Accessories Including Pulleys, Drive Unit, Tensioning Arrangement, Idlers, Brackets, Conveyor Belt ,Electrical Panels Etc Complete) , Fabrication Of Conveyor Gantry Along With Its Trestles, Drive Platforms And Support Structures, Tipping Shed And Applying Approved Coat Of Steel Primer. , Providing Corrugated Gs Sheet Roofing Inlcuding Vertical Curved Surface Fixed With Ploymer Coated J Or L Hooks ( For Conveyor Gantry)

BOQ

Sl. No. Item TitleItem Description
1Fabrication of foundation & support steel structure for Primary & Secondary Crusher including chassis complete with crusher & Chain conveyor system , feeding hopper, discharge chute, cabin , rock breaker, panels , secondary crusher etc and steel fabricated retaining wall , with railing and applying approved coat of Steel Primer for installation of Black Diamond make Feeder Breaker(For Primary & Secondary Crusher Complete)Fabrication of foundation & support steel structure for Primary & Secondary Crusher including chassis complete with crusher & Chain conveyor system , feeding hopper, discharge chute, cabin , rock breaker, panels , secondary crusher etc and steel fabricated retaining wall , with railing and applying approved coat of Steel Primer for installation of Black Diamond make Feeder Breaker(For Primary & Secondary Crusher Complete)
2Painting with synthetic enamel paint of approved brandPainting with synthetic enamel paint of approved brand
3Complete supply and installation of control cables (12 core x 1.5 sq.mm.0 from control panel to operator cabin (Material+labour)Complete supply and installation of control cables (12 core x 1.5 sq.mm.0 from control panel to operator cabin (Material+labour)
4Earth Work in excavation by mechanical means (hydraulic excavator)/manual means foundationtrenches or drains.Earth Work in excavation by mechanical means (hydraulic excavator)/manual means foundationtrenches or drains.
5Supplying and Filling in plinth with sand and rock under floors, including watering, remaining, consolidating and dressing complete.Supplying and Filling in plinth with sand and rock under floors, including watering, remaining, consolidating and dressing complete.
6Providing and Laying in Position Cement Concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 Cement : 3 fine sand : 6 graded 20mm nominal size).Providing and Laying in Position Cement Concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 Cement : 3 fine sand : 6 graded 20mm nominal size).
7Providing and Laying in position specified grade of Reinforced Cement Concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all works up to plinth level : 1:1.5:3 (1 Cement : 1.5 Course sand :3 graded stone aggregate 20mm nominal size).Providing and Laying in position specified grade of Reinforced Cement Concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all works up to plinth level : 1:1.5:3 (1 Cement : 1.5 Course sand :3 graded stone aggregate 20mm nominal size).
8Centering and Shuttering including strutting, propping etc. and removal of form for foundations, footings, base of columns etc. for mass concrete. (Material+Labour).Centering and Shuttering including strutting, propping etc. and removal of form for foundations, footings, base of columns etc. for mass concrete. (Material+Labour).
9Centering and Shuttering including strutting propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts (Material+Labour).Centering and Shuttering including strutting propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts (Material+Labour).
10Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically treated bars of Grade Fe-500D or more (Material+Labour) @ 130 Kg./ CUMSteel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically treated bars of Grade Fe-500D or more (Material+Labour) @ 130 Kg./ CUM
11Providing and Fixing mild steel round holding down bolts with nuts and washer plates complete and insert plate where required. (Material+Labour).Providing and Fixing mild steel round holding down bolts with nuts and washer plates complete and insert plate where required. (Material+Labour).
12Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and for all lift upto 1.5m (Material + labour)Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and for all lift upto 1.5m (Material + labour)
13Providing corrugated GS sheet roofing inlcuding vertical curved surface fixed with ploymer coated J or L hooks ( For tipping shed over hopper)Providing corrugated GS sheet roofing inlcuding vertical curved surface fixed with ploymer coated J or L hooks ( For tipping shed over hopper)
14Dismantling and shifting of Secondary Crusher & accessories of conveyor belt including conveyor pulleys, drive structure, drive unit, electrical panels, conveyor belt, idlers, rollers etc. which is available at site.(Vehicle and crane will be provided by the department)Dismantling and shifting of Secondary Crusher & accessories of conveyor belt including conveyor pulleys, drive structure, drive unit, electrical panels, conveyor belt, idlers, rollers etc. which is available at site.(Vehicle and crane will be provided by the department)
15Installation, Commissioning Testing and Trial run of One No. Black Diamond Make Feeder Breaker Complete with all accessories. (Primary + secondary+ Conveyor belt complete including chassis,crusher, drive units, hoppers, chute, electrical panels etc & conveyor belt accessories including pulleys, drive unit, tensioning arrangement, idlers, brackets, conveyor belt ,electrical panels etc complete)Installation, Commissioning Testing and Trial run of One No. Black Diamond Make Feeder Breaker Complete with all accessories. (Primary + secondary+ Conveyor belt complete including chassis,crusher, drive units, hoppers, chute, electrical panels etc & conveyor belt accessories including pulleys, drive unit, tensioning arrangement, idlers, brackets, conveyor belt ,electrical panels etc complete)
16Fabrication of conveyor gantry along with its trestles, drive platforms and support structures, tipping shed and applying approved coat of steel primer.Fabrication of conveyor gantry along with its trestles, drive platforms and support structures, tipping shed and applying approved coat of steel primer.
17Providing corrugated GS sheet roofing inlcuding vertical curved surface fixed with ploymer coated J or L hooks ( For conveyor gantry)Providing corrugated GS sheet roofing inlcuding vertical curved surface fixed with ploymer coated J or L hooks ( For conveyor gantry)

AI Tender Summary

OUR REF NO 57026643
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.73 Crore
LAST DATE 04-09-2026
Authority
Authority Name Western Coalfields Limited
Work Description Bids Are invited for Custom Bid For Services - Installation Commissioning Testing And Trial Run Of Black Diamond Make 400Tph Feeder Breaker With Primary And Secondary Crusher Along With Belt Conveyor At Dhoptala Ocm Ballarpur Area - Fabrication Of Foundation & Support Steel Structure For Primary & Secondary Crusher Including Chassis Complete With Crusher & Chain Conveyor System , Feeding Hopper, Discharge Chute, Cabin , Rock Breaker, Panels , Secondary Crusher Etc And Steel Fabricated Retaining Wall , With Railing And Applying Approved Coat Of Steel Primer For Installation Of Black Diamond Make Feeder Breaker(For Primary & Secondary Crusher Complete) , Painting With Synthetic Enamel Paint Of Approved Brand , Complete Supply And Installation Of Control Cables (12 Core X 1.5 Sq.Mm.0 From Control Panel To Operator Cabin (Material+Labour) , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Foundationtrenches Or Drains. , Supplying And Filling In Plinth With Sand And Rock Under Floors, Including Watering, Remaining, Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:3:6 (1 Cement : 3 Fine Sand : 6 Graded 20Mm Nominal Size). , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Works Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Course Sand :3 Graded Stone Aggregate 20Mm Nominal Size). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Base Of Columns Etc. For Mass Concrete. (Material+Labour). , Centering And Shuttering Including Strutting Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts (Material+Labour). , Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More (Material+Labour) @ 130 Kg./ Cum , Providing And Fixing Mild Steel Round Holding Down Bolts With Nuts And Washer Plates Complete And Insert Plate Where Required. (Material+Labour). , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering Lead Up To 50M And For All Lift Upto 1.5M (Material + Labour) , Providing Corrugated Gs Sheet Roofing Inlcuding Vertical Curved Surface Fixed With Ploymer Coated J Or L Hooks ( For Tipping Shed Over Hopper) , Dismantling And Shifting Of Secondary Crusher & Accessories Of Conveyor Belt Including Conveyor Pulleys, Drive Structure, Drive Unit, Electrical Panels, Conveyor Belt, Idlers, Rollers Etc. Which Is Available At Site.(Vehicle And Crane Will Be Provided By The Department) , Installation, Commissioning Testing And Trial Run Of One No. Black Diamond Make Feeder Breaker Complete With All Accessories. (Primary + Secondary+ Conveyor Belt Complete Including Chassis,Crusher, Drive Units, Hoppers, Chute, Electrical Panels Etc & Conveyor Belt Accessories Including Pulleys, Drive Unit, Tensioning Arrangement, Idlers, Brackets, Conveyor Belt ,Electrical Panels Etc Complete) , Fabrication Of Conveyor Gantry Along With Its Trestles, Drive Platforms And Support Structures, Tipping Shed And Applying Approved Coat Of Steel Primer. , Providing Corrugated Gs Sheet Roofing Inlcuding Vertical Curved Surface Fixed With Ploymer Coated J Or L Hooks ( For Conveyor Gantry)
Basic Detail
Tender No GEM/2026/B/7920858
Bidding Type Tender
Location
City Chandrapur
State Maharashtra
Key Dates
Publish Date 14 Aug 2026
Submission Date 04 Sep 2026
Open Date 04 Sep 2026
Finance
Tender Value 1.73 Crore
Tender Fee Ref. Documents
EMD 2.16 Lakhs
Exemption Not Available
Document List
bf5fd998-6587-4605-93d6-169659e64011.pdf
1786707965.xlsx
1786707972.pdf
1786707977.pdf
1786707981.pdf
1786707986.pdf
1786707993.pdf
1786707994.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Sep 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
pdf

bf5fd998-6587-4605-93d6-169659e64011.pdf

xlsx

1786707965.xlsx

pdf

1786707972.pdf

pdf

1786707977.pdf

pdf

1786707981.pdf

pdf

1786707986.pdf

pdf

1786707993.pdf

pdf

1786707994.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders