Tender For Internal Painting, Pvc Flooring, Carpeting And Other Miscellaneous Civil Works In Type -V Staff Quarters No: Atbl-Vi (Ccas Residence) At Lower Banashree, Shillong.
Tender Value
3.27 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
6 days left
EMD
6550
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Painting, Pvc Flooring, Carpeting And Other Miscellaneous Civil Works In Type -V Staff Quarters No: Atbl-Vi (Ccas Residence) At Lower Banashree, Shillong.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | a) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. |
| 4 | Kiln seasoned and chemically treated hollock wood |
| 5 | 25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with : |
| 6 | Second class deodar wood |
| 7 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 8 | 110 mm diameter |
| 9 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 10 | 110 mm bend |
| 11 | 110 mm Shoe |
| 12 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. |
| 13 | 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 14 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 16 | Old work (one or more coats) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 18 | Two or more coats on new work. |
| 19 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 20 | One coat. |
| 21 | Two coats. |
| 22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 23 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. |
| 24 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 25 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 27 | One or more coats on old work. |
| 28 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 29 | 1:4 (1 cement: 4 fine sand) |
| 30 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : |
| 31 | Natural colour insulating board - 12 mm thick |
| 32 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 33 | W.C. pan with ISI marked white solid plastic seat and lid |
| 34 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 35 | 15 mm nominal bore, 122 mm long, weighing not less than 99 gms |
| 36 | 18.56 Providing and fixing PTMT pillar cock of approved quality and colour. |
| 37 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 38 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 39 | 15 mm nominal dia |
| 40 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 41 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 42 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 44 | 20 mm nominal outer dia .Pipes. |
| 45 | Providing and fixing uplasticised PVC connection pipe with brass unions : (i) 45 cm length |
| 46 | 15 mm nominal bore |
| 47 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 48 | 100 mm diameter |
| 49 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 50 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 51 | Providing and fixing PTMT grating of approved quality and colour. (i)Circular type. |
| 52 | 100 mm nominal dia. |
| 53 | P/F PVC sheet flooring and skirting of approved company like Krishna Vinyl, Wonder Floor etc orequivalent in approved pattern on a smooth and damp proof base using rubber adhesive of approved quality and manufacturer like Dunlop-S-758,Fevicol SR-998 or equivalent, including rolling with light wooden roller weighing about 5 kg. including repairing of damaged floor where ever necessary all complete as per direction of Engineer - in- Charge. (a) 1.50 mm thick sheet |
| 54 | Providing and fixing single coloured non woven velour floor of approved colour of carpet of 4 mm thickness , and instanious commpressional recovery of 85% of standard manufactures like Super floor or equilant and fixing with adhesive of approved brand and manufacture like fevicol SR 998 or equilant including cutting to fit to floor size all complete as directed by engineer in charge |
| 55 | Supply of helpers for carrying out works like shifting of office furnitures from the place of work to a designated place and replacing the same to its original position or as directed. The job is to be carried out with utmost care so as to Not damage the office furniture. |
| 56 | Easening of door/ windows including closing of gaps wherever required by providings beadings/ lippings etc and ensure smooth functioning etc complete as directed by the Engineer-in-Charge. Note: the rate includes the cost of all incidental material and labour involved in carrying out all the above operations. |
| 57 | Removing the damaged health faucet and providing and fixing a CP brass health faucet of approved quality. The work includes all necessary operations and shall be completed as per the direction of the Engineer-in-Charge. |
| 58 | Health faucet with PVC pipe including holder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender