Tender For Improvement Of Lwss Ghalian Thakurdwara, Lwss Rajiana And Ranital In Tehsil And Ditt. Kangra H.P. (Sub Head:- Construction Of Store Room For Jal Shakti Sub Division Ranital ). Estimated Cost- 463657/- Earnest Money-9275/- Time Limit- Three
Tender Value
4.63 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
10 days left
EMD
9275
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Lwss Ghalian Thakurdwara, Lwss Rajiana And Ranital In Tehsil And Ditt. Kangra H.P. (Sub Head:- Construction Of Store Room For Jal Shakti Sub Division Ranital ). Estimated Cost- 463657/- Earnest Money-9275/- Time Limit- Three Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc.in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre) layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge. |
| 2 | Providing and laying Cement concrete 1:6:12 (1 Cement:6 Sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete in all respect including all leads and lifts. |
| 3 | P/L CC. 1:2:4 (1 cement: 2sand: 4graded stone agg.40mm nominal size) and curing complete excluding the cost of form work and reinforcement work for rainforcement cement concerete work in foundation and plinth complete within all leads and lifts. |
| 4 | Providing form work of steel sheets in Columns, pillars, posts and struts : Square, rectangular or polygonal in plan. |
| 5 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in-situ-reinforced concrete and plain concrete work in:- Beams,cantilevers,girders & lintels etc. sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtrs. In depth in all heights from floor complete in all respect including all leads and lifts. |
| 6 | Providing and Laying cement concrete 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 7 | Columns, pillar posts and struts upto floor i/c carriage of material within all leads and lifts. |
| 8 | In suspended floor roofs,landings, shelves and their supports balconies, beams girders bressumers and centilevers upto floor two level i/c carriage of material within all leads and lifts. |
| 9 | Providing mild steel/tor steel reinforcement for RCC work including binding wire bending, binding and placing in position complete upto floor two level (tor steel) with in all leads and lifts |
| 10 | Ist class Half Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:4 (1cement:4sand), with in all leads and lifts. |
| 11 | Providing wood work in frames of door,windows clerestory windows and other frames wrought framed and fixed in position in 1st class deodar wood complete within all leads and lifts. |
| 12 | Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 2nd class deodar wood complete with in all leads and lifts as per the directions of Engineer-in-charge. |
| 13 | 20mm cement plaster in single coat on rough side of brick\stone masonary for interior plastering up to floor two level including arrises, internal rounded angles, chamfers and\or rounded angles not exceeding 80mm in girth and finished even and smooth in C.M 1:6 (1 Cement :6 Sand) with in all leads and lifts. |
| 14 | 6mm thick cement plaster to ceiling in CM 1:3 (1cement:3 sand) with in all leads and lifts. |
| 15 | Stone soling properly hand packed filling interstices with spalls and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. 100mm spread thickness (finished work including materials and labour) within all leads and lifts an da directed by the Engineer-in-charge |
| 16 | 40 mm thick cement concrete flooring 1:2:4 (1 Cement:2 Sand:4 ggaded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement base concrete (to be paid for seperately) complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts. |
| 17 | Providing and fixing bright finished MS tower bolts (barrel type) size 100 x10 mm Dia with necessary screws etc. complete within all leads and lifts and to the entire satisfaction of Engineer- In Charge. |
| 18 | Providing and fixing bright finished MS handles size 100 mm Dia with screws etc. complete within all leads and lifts and to the entire satisfaction of Engineer- In Charge.: |
| 19 | Providing and fixing Hinge size 3.5 inches x 3.5 inches with screw complete within all leads and lifts and to the entire satisfaction of Engineer- In Charge.: |
| 20 | Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground complete in all respect. |
| 21 | Supplying and fixing rolling shutters of approved make made of required size M.S. laths, interlocked together through their entire length and jointed together at th end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. (80xl.25mm laths with 1.25mm thick cover) complete in all respect. |
| 22 | Providing and fixing M.S. gril of required pattern in wooden frames of window s etc. with M. S. flats square or round bars with round headed bolts and nuts or by screws plain grills with in all leads and lifts. |
| 23 | Wall painting of (two coat) with emulation paint of approved brand and manufature of interior grade Decorated/undecorated wall surface (including the prapation of wall sufaces with putty of approved brand) to give an even shade , including throughtly brushing the surface free from morter droping and other foreign matter and sand papering smooth including all respect . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender