Tender For Repair And Maintenance Of Inspection Hut Chirawali At Nahan Under Apo Unit Nahan ( Job No. N-1/ Maint-Building/26-27) Estimated Cost = Rs 983200/-
Tender Value
9.83 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
15000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Inspection Hut Chirawali At Nahan Under Apo Unit Nahan ( Job No. N-1/ Maint-Building/26-27) Estimated Cost = Rs 983200/-
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: DPO IDP SIRMOUR AT NAHAN Name of Work: Repair and Maintenance of Inspection Hut Chirawali at Nahan Under APO Unit Nahan ( Job No. N-1/ Maint-Building/26-27) Estimated Cost = Rs 983200/- Contract No: Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Repair and Maintenance of Inspection Hut Chirawali at Nahan |
| 3 | Demolishing CC manually/by mechnical means including disposal of material within 50 mtrs lead as per direction of engineer in charge . Nominal concrete 1:3:6 or richer mix ( i/c equivalent design mix) |
| 4 | Repair to plaster with cement mortar 1:4 (1 cement: 4 fine sand)of thickness 12mm to 20mm in patches of area 2.5 sqm and undr including cutting the patch in proper shape raking out joints and preparing and plastering the surfaceof the walls complete including disposal of rubbish to the dumoing ground all complete as per direction of Engineer in charge. |
| 5 | Renewing glass panes and refixing existing wooden fillets : Float glass panes of nominal thickness 4mm ( weight not less than 10kg/sqm |
| 6 | Removing dry or oil bound distemper ,water proofing cement paint and the like by scrapping sand papering and preparing the surface smooth including necessasry repair to scratches etc complete |
| 7 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete |
| 8 | Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade : one or more coats on old work |
| 9 | Finishing walls with acrylic smooth exterior paint of required shade old work ( Two or more coat applied @ 1.67ltr/10sqm) on existing cement paint surface |
| 10 | Painting wood work with deleux multi surface paint of required shade. Two or more coat applied @0.90ltr/10sqm over an under coat of primer applied @ 0.75ltr/10sqm of approved brand and manufacture |
| 11 | Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @0.90ltr/10sqm over an under coat of primer applied @ 0.80/10sqm of approved brand and manufacture. |
| 12 | Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @0.90ltr/10sqm over an under coat of primer applied @ 0.80/10sqm of approved brand and manufacture. |
| 13 | Providing and laying vitrified tiles 600*600 mm in floor with different sizes (thickness to be specified by the manufacturer),with water absorption less than 0.08% and forming to IS:15622 of approved brand & manufacturer in all colours and shade , laid with cement based high polymer modified quick set tile adhesive (water based ) conforming to IS:15477 in average 6mm thickness including grouting of joints ( payment for grouting of joints to be made separately) |
| 14 | Providing and laying 600*600 mm vitrified tiles in different sizes (thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS:15622 of approved brand & manufacturer in all colours and shade in skriting , riser of steps , laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477 in average 6mm thickness , including grouting of joints ( payment for grouting of joints to be made separately ) |
| 15 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes 110 mm diameter conforming to IS:13592 Type A including jointing with seal ring conforming to IS:382 leaving 10mm gap for thermal expension (i) single socketed pipe. |
| 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories 110mm bend for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal sing conforming to IS:5382 leaving 10 mm gap for thermal expansion. |
| 17 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories 110mm shoe for unplasticied rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. |
| 18 | Providing and fixing MS holder bat clamps 100 mm diameter of approved design to CI or SCI rain water pipes embedded in and including cement concrete blocks 10*10*10 cm of 1:2:4 mix (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size ) and cost of cutting holes and making good the walls etc. |
| 19 | Providing and fixing PVC sheet false ceiling as per direction of DPO/APO , IDP Nahan. |
| 20 | Providing and fixing one piece construction white vitreous china quatting plate with an integral longitudinal flushing pipe, white PVC automatic flushing cistern with fittings standard size GI/PVC flush pipe for back and front flush with standard spreader pipes with fittings GI clamps and CP brass coupling complete , including painting of fittings and cutting and making good the walls and floors etc. wherever required : Range of two squatting plates with 5 litre PVC automatic flushing cistern. |
| 21 | Providing and fixing 8 mm dia CP / SS jet with flexible tube upto 1 meter long with SS triangular plate to Eureopean type WC of quanity and make as approved by FEO/APO in charge |
| 22 | Providing and fixing wash basin with CI brackets 15 mm dia CP brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherver required - white vitreous china wash basin size 550*400 mm with a 15 mm CP brass single hole basin mixer and make as approved by FEO/APO in charge |
| 23 | Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour . Waste coupling 38mm dia of 83mm length and 77mm breadth , weighing not less than 60 gms |
| 24 | Providing and fixing 600*450 mm beveled edge mirror of superior glass ( of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete |
| 25 | Providing and fixing toilet paper holder CP Brass |
| 26 | Providing and fixing PTMT liquid soap container 109mm wide 125 mm high and 112 mm distance from walls of standard shape with bracket of the same material with snap fitting of approved quality and colour weighing not less than 105 gms and make as approved by FEO/APO in charge |
| 27 | Providing and fixing PTMT towel rail complete with bracket fixed to wooden cleats with CP Brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm , 78mm wide and effective height of 88 mm weighing not less than 170 gms |
| 28 | Providing and fixing PTMT shelf 440 mmlong 124 mm width and 36 mm height of approved quality and colour weighing not less than 300 gms |
| 29 | Providing and fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS:8931 |
| 30 | Providing and fixing 15mm nominal bore CP brass long body bib cock of approved quality conforming to IS standard and weighing not less than 690 gms |
| 31 | Providing and fixing 15 mm nomina; bore CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893 |
| 32 | Providing and fixing PTMT swivelling shower 15 mm nominal bore weighing less than 40 gms |
| 33 | Providing and fixing sierra make mixture 15mm diameter for wall |
| 34 | Providing and fixing siera make mixture 15mm diameter for washbasin |
| 35 | Providing fixing ready made wash basin with cabin and bibcock complete fitting |
| 36 | Renovation of kitchen cooking range (Shelves,cupboard with shutter etc) complete. |
| 37 | Providing fixing Bajaj Gyser 25 litre capacity |
| 38 | Providing /fixing MS sheet Godrej shutter for cupboard with handle and lock complete |
| 39 | Repair work of door window and wire gage shutter with fitting etc |
| 40 | Provsion for electrical rewiring and fitting including fancy light of fallcieling etc |
| 41 | Rubbing and polishing to old marble chips flooring complete Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender