Tender For Estimate For Renovation And Modernization In Canal Colony Town & District Gurdaspur
Tender Value
73.54 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
13 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Estimate For Renovation And Modernization In Canal Colony Town & District Gurdaspur
BOQ
| Sl. No. | Item Description |
| 1 | PUNJAB WATER RESOURCES DEPARTMENT XEN,Madhopur Canal & Ground Water Division WRD.PB. Gurdaspur NAME OF WORK: Estimate for Renovation and Modernization in Canal Colony Town & District Gurdaspur Name of Firm Sr.No Description Unit QUANTITY Rate (in figures) Rate (in Words) |
| 2 | Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base |
| 3 | Dismantling concrete ( e) Reinforced cement concrete |
| 4 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in allcolours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. (a) Size 600x600 mm |
| 5 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beadin |
| 6 | Dismantling glazed tiles (to be carefully removed). |
| 7 | Providingand fixing1st quality ceramic glazed wall tiles Matt/SemiMatt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approvedmake in all colours, shadesexcept burgundy, bottlegreen, blackof size450x310mmasapprovedby Engineer-in Chargeinskirting, risersofstepsanddadosover 12mmthickbedofcementMortar 1:4(1cement: 4 finesand) andjointingwithgreycementslu rry @3.3kg per sqm including pointing in white cementmixedwithpigment ofmatchingshade complete |
| 8 | Providingand laying 60mmthick factory made cement concrete interlocking Paving blocks of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydrauli cpressure for compaction of concrete as per IRCSP63-2014 andof approved size and design/ shape laid in Ordinary Grey Colour and pattern over and including 40 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc, allcomplete as per directions of Engineer-in Charge. |
| 9 | Scraping © Cement plaster |
| 10 | 20mm thick cement plaster 1:4 in two coat work |
| 11 | 12.5 mm thick cement plaster 1:4 |
| 12 | Preparationof plasteredor concretesurface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying twoormore coats toget required finish |
| 13 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) twoor more coats over one priming coat to give an even shade |
| 14 | Dismantling brick work tile, masonry or tile lining (b) In cement |
| 15 | First class burnt work laid in cement sand mortar 1:7 in foundation and plinth |
| 16 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 17 | Reinforced cement concrete M-25 mechanically batchmixed using batch type concrete mixer asper IS:1791andvibrated by needle vibrator but excluding steel reinforcement centring and shuttering insuperstructure |
| 18 | Coloured Granite stone tiles 15mm to 20 mm thick inskirting, risersofsteps,dadowall sand pllars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment tomatch the shadeof stone, including rubbing and polishingincluding labour for fixing dowel pins and cramps. |
| 19 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent makeapproved by Engineer in Charge (a) For fixed portion and chawkhats |
| 20 | Cement concrete 1:8:16 (b) With stone aggregates 20mm gauge (ii)mixing by mechanical means using concrete mixer volumetric type |
| 21 | Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046Type S, ISI marked complete in all respect as per the directions of Engineer in-charge |
| 22 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (a)(iv) Commercialwith elm or gurjan facing on both \ Sides with laminated core and lipped edges:35mm thick Code: IS 2202-1(1999) |
| 23 | Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf) |
| 24 | Deodar wood doors shutter windows shutter includinghinges, screw and cords etc. Complete fixed in position (a) (ii) Panelled, glazed or glazed and panelled. (ii) 35mm thick |
| 25 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b) Glazing area above 0.09 sqm (iii) 5.0mm thick Plate glass (INDIAN) |
| 26 | Finishing walls with exterior decorative cement based paint such as snowcem, robbia cemetc. Two or more coats to givean even shade |
| 27 | Dismantling roofing (a) First class mud roofing |
| 28 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster ncluding two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C.slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 29 | Painting two or more coats excluding priming coat with synthetic enamel paint inall shades on wood work,metallic or plastered,concretesurface to give an even shade |
| 30 | Removing Door sand Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below (b) |
| 31 | Windows of area 3 sqm and below |
| 32 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 33 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (i) For shutter area up to 0.50 sqm |
| 34 | Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span (a) Up to 15.00Mtr. Span ( Class A Light) |
| 35 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 36 | Dismantling Sanitary fixtures such asEurpoean/Indian/OrissaW.C.,PVC/Chinaware cistern,WashHandBasin, UrinalPot,Sinksand CP Fittings and disposal of dismantled material within a distance of 100Mtr. complete in all respect as required by Engineer-in-Charge. (a)Eurpoean/Indian/Orissa W.C., |
| 37 | PVC / China Ware Cistern |
| 38 | Wash Hand Basin / Urinal Pot |
| 39 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 40 | Providing and fixing in position vitreous chinawarewhite lavatory suites of approved make (to theapproval ofEngineer-in charge) includingRackBolt ScrewPair 115mm long without CP fittings complete in all respect. (iii) Size 630 mm x 450 mm x 830 mm |
| 41 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respectand to the entire satisfaction of Engineer-in-charge. (a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm withP trap or S trap and seat cover complete in all respect. |
| 42 | Providing & fixing in position 15 mm i/d C.P brass wall mixer of approved make (to the approval of Engineer-in-charge ) completein all respect.(a) C.P brass wall mixer with Telephonic Shower |
| 43 | Providing and fixing in position C.P elbow action pillar tap of approvedmake (to the approvalofEngineer-in charge)completeinall respect |
| 44 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. rating with frame with or without vent arm and including cement oncrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. (a) With 100mm x 75mm i/dFloor Trap (weighing 4.0 Kg) |
| 45 | Providing and fixing in position automatic brass Ball Cock in anks.(A) Plastic Ball Cock with rod and Plastic Ball (iii) 25mm i/d |
| 46 | Providing and fixing inpositionG.I.TankNipple of approved make (to the approval of Engineer-in charge) inPVC Water storage tanks complete in all respect. © G.I. tank nipple 25mm i/d |
| 47 | Providing&Fixing inpostion15mm i/dbib cock of approvedmake (to the approval of Engineer-in-charge )complete in all respect. (i) long body foam flow without flange |
| 48 | Providing & fixing in position PVC flexible tube connectionof approved make (to the approval of Engineer-in-charge ) completein all respect.(b) PVC tube connection of size15mmx450 mm with C.P. Brass nut |
| 49 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects |
| 50 | Providing & placing in position on terrace(at all floor levels) HDPE water storage tanks of approved make(to the approval of Engineer-in charge) with cover with suitable locking arrangement andmaking necessary holes for inlet,outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks |
| 51 | Providing & Fixingin postions top cock/Angle valve of pprovedmake (to the approval of Engineer-in-charge ) complete in all respect.(d) C.P.brass 20mm concealed stop cock with flange |
| 52 | Providing and fixing jet spray with 2'-6\\" long PVC pipe.(a) With C.P. Brass nut |
| 53 | Providing and fixing in position C.P. brass bottle trap 32mmdia with 40mm seal of approved make (to the approval of Engineer-incharge) complete in all respect |
| 54 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304(18/8) with waste coupling complete in all respect.(a) Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230mm |
| 55 | Earthwork excavation in ordinary soil, exclusive of compensation of earth:- (a) Kassi work undressed involving an average horizontal throwup to2.0 metres and an average vertical lift up to 0.5metres including breaking of clods |
| 56 | Shuttering for face of concrete foundations and foundationbeam & plinth beam (vertical or battering) |
| 57 | Centering and shuttering for columns (Squareorrectangularor poly gonal in plain) |
| 58 | First class burnt brick work laid in cement sand mortar1:6 in first storey upto 4 metres above plinth level. |
| 59 | Excavation in trenches with straight or open cutting instreets, lanesor in open area with 3D/JCB or excavator including manually dressing bed,trimming side sand side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering,provision for diversion for traffic, protection of existingservices i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods,watching,etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface tooriginal level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects (a) Depth not exceeding 3 m. BGL(ii) For Ordinary Soil having gravel 40% |
| 60 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarsesand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1cement: 4 coarse sand : 8graded stone aggregate 40mm nominal size) inside plastering 12mm thick withcement mortar 1:3 (1 cement: 3 coarse sand ) finished with floating coat of neat cementand making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.(b) Inside size 90x150 cm and 120 cm deep |
| 61 | Cement concrete 1:6:12 )b) With stone aggregate 40mmgauge (ii) mixing by m echanical means using concrete mixer volumetric type |
| 62 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed inwall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable numberof modules (Modular accessories) for having Step type electronic fanregulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket(shuttered), 6/10Amp. Switches and 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (ForFan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\"deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq.mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material,cutting and filling up of chases:- Make: Polycab/ Anchor/ Diplast/ Norpack (i) a Wiring fan point (Without fan box) |
| 63 | Wiring light point |
| 64 | Wiring call-bell point |
| 65 | Wiring 6Amp. wall socket point |
| 66 | Wiring 6Amp. Plug control comprising wall socket point |
| 67 | Wiring 16/20Amp. power plug control point |
| 68 | Supply and erection of PVC 1,620.00 30.34 metre 49,150.80insulated FR single core Unsheathed copper conductor cable (ISImarked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Make: Havells/ RR Kabel/ KEI/ Plaza/ Kunthkib/ Polycab/ L&T,Rellison, or Equivalent (ii) Overall size 1.5sq.mm (Un-sheathed) |
| 69 | Overall size 2.5sq.mm (Un-sheathed) |
| 70 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks,MS saddle clamps and other petty materials etc., as per PWD General Specifications:- Make: Anchor, polycab, Norpack, Adrshplast, Diplastor Equivalent.(x) Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 71 | Supply and erection of switches, sockets and other accessories (flushpiano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc:Ceiling Rose (Flush Piano type) |
| 72 | Bakelite Batten Holder (Large size ) |
| 73 | Call Bell 220/230 volts AC Ding Dong |
| 74 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitablefor 240/ 415 volts 50cycles AC supply with breaking capacityof 10kA, Curve-C and low watt losses as per IS/IEC 60898-1,energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: - Make: Havell's, Legrand( DX3), Schneider(ACTi-9), L&T ( Exora), Hager (NCN), or equivalent. (ii) MCBSingle Pole 6-32amp. (10kA, Curve-C) |
| 75 | MCB Double Pole 50, 63amp. (10kA, Curve-C) |
| 76 | Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector,color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distributionboard (For SP&N distribution board with provision DP MCB/ RCCB/RCBO as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB/RCCB/ RCBO as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- Make: Legrent (Ekinoxe), Scheinder (Acti-9) L&T (Exora), Hager (Novella), Havells (Qve) orEquivalent. SP&N Double Door Distribution Board 8 way each |
| 77 | Supply and erection of Exhaust Fans 250mm 900RPM including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in charges at site. Make:- Crompton Ventilus 10\\"/Havells Ventil Air DX / DX-HS White /Make: Orient 250 mm Ventilator |
| 78 | Supply and erection of BEE 5 star rating BLDC Ceiling Fan 1200mm (48\\") No. of blades 3 down rod length 26cm Motor type BLDC star rating 5 star power consumption 26-28 w Rated frequency 50HZ Rated voltage 220-240 Net contents 1N fan motor with PCB controller ,1N safety wire ,1N canopy set ,2N AAA Batteries ( 1.5 V) ,1N downrod , 1N instruction Manual ,1N set of 3 N Blades & 1N Shackelassembly Gurantee : 2 Year including erection testing of ceiling fans Having connection with Pvcx insulated & sheated two single core copper conductor (FR) having cable size 0.75 sqmm .The workshould complete in all respects as desired by the Engineer in charge at site Make Crompton -HIGH SPEED, Havells- ES-40 ( 5Star Rating ), Orient-New Breeze ( 5Star ), Bajaj-Sabse Tezz003(3 Star Rating ) |
| 79 | Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixtureminimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along witherection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.Thecertification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letterno.AT/2021/GL/1410-1422 Dated 06/05/2021. is the lighting fixture manufacturer should have inhouse NABL accredited lab. Cromption-CCS-103-20-65-SL -DP-NWH, Havell'sLUMILINE+BS20WLED 865SPC SS, Philips-BN021C LED22S PSU CW GR, Bajaj- BCLAB20W LED P, Wipro-LL20-281-XXX-65AL1, Eveready-LEDBTA 02016-02 |
| 80 | .Supply & Erection of 15 watt LED Bulb Energy Saving, Enviornment Friendly High Glo LED Lamp comes with 180º beam angle which provides more brightness with wider light spread. It complies withBEE 3-Star Rating. complete in all respect as per approved /desired by the engineer in charge of work at site . Make Orient : B22d/E27L / WW Make Havells : NU BULB+ 15 W 3 STAR B22 CDL Halonix Cat No. ASTRON PLUS 15 Watt CWB |
| 81 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, wherespecially specified |
| 82 | Extraforprefinishednosingtotre adsofstepsof marble stone.( Full gola, half round gola etc.) |
| 83 | Providing and fixing onwall face unplasticised Rigid PVC rain water pipes single socketed (workingpressure4kgf /cm²)conformingtoIS:4985, including fixing with MS clamps.(i) Single socketed pipe 110 mm dia .U-PVC pipes working pressure 4kgf/sqcm pipe 110mm dia |
| 84 | DismantlingH.C.I Soil pipes includingdisposal as desiredby the Engineer-in-Charge.(a 100mm i/d H.C.I. pipe |
| 85 | Cuttingchaseinbrickwallsincem entor infloor forembedding G.I.or C.Ipipes lineandmaking good the same to its original condition.(b)Size 150 mm x 150 mm |
| 86 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipe shaving ISI specification IS:15328-2003class-SN-8marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment andgradients, cuttingand jointing, testing for watertightness and making good the leakages and defects including cost of specials (Specials and Solvent shouldbeof same makeas thatof pipes) complete in all respects.(a) 110mm o/d pipe |
| 87 | Providing, laying in trenches to correct gradient and alignment andjointing of UPVC pipes having ISI specification IS: 15328-2003 classSN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches tocorrect alignment and gradients, cutting and jointing, testing for watertightness and making good the leakages and defects including costof specials (Specials and Solvent should be of same make as that ofpipes) complete in all respects e 315mm o/d pipe |
| 88 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the priorapproval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing including jointing ofpipes & fittings, with one step CPVC solvent cement and testingof pipes complete as per direction of Engineer-in-Charge. (b) SDR11 CPVC pipes & fittings 20mm o/d |
| 89 | Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc. |
| 90 | Any Other Compatibility Report for Harpur.xls Run on 28-03-2025 12:10 The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when you save this workbook in an earlier file format. Minor loss of fidelity # of occurrences Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned. 2.0 'boq 1'!B21 'boq 1'!C22 |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender