Tender For Providing And Replacement Of Split Air Conditioners In Sdm Office, Dwarka, New Delhi.
Tender Value
2.93 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
5865
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Replacement Of Split Air Conditioners In Sdm Office, Dwarka, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). |
| 2 | 1.5 TR with 5 Star BEE Rating |
| 3 | Supplying, Installation, Testing and Commissioning of Electronic Voltage Stabilizer of Capacity : 4 KVA (Suitable for upto 2 Tr. AC) for Voltage correction, low / high voltage Cut off, overload cut off with automatic reset, fail safe Circuit protection, Main Turn on delay, Wall mounting Cabinet design etc as required. Input Voltage : 140 – 280V ±5% Output Voltage : 200 – 250 V±5% |
| 4 | Providing & fixing of MS powder coated outdoor wall mounting Stand suitable for 1.5/2.0 TR capacity split AC outdoor unit complete as reqd. |
| 5 | Supplying, Installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : |
| 6 | 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 7 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 8 | Supply and installation of control cum transmission wiring of 3 core x 2.5 sqmm copper Unarmoured in suitable fittings between indoor and outdoor units on surface / conduit / pipe / cable tray / open duct etc. complete as required |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 10 | 25 mm nominal outer dia Pipes |
| 11 | Supplying and fixing 16 A, 3-pin plug top on existing flexible cord/cable, including cutting, stripping of insulation of wires, making necessary connections/terminations with brass screws, ensuring correct polarity (Phase, Neutral, and Earth), testing and commissioning etc. as required. |
| 12 | Less Credit cost for following old dismantled Materials |
| 13 | 1.5 Tr. Split type Air conditioners complete with Indoor unit, Out door unit |
| 14 | Stabilizer 4 KVA/5 KVA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender