Tender For Repairs To Steel/ Wooden Furniture Including Painting/ Polishing To Furniture And Renewal Of Furniture Under Bso Ge (Af) Thoise
Tender Value
18 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
11 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LADAKH → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Steel/ Wooden Furniture Including Painting/ Polishing To Furniture And Renewal Of Furniture Under Bso Ge (Af) Thoise
BOQ
| Sl. No. | Item Description |
| 1 | Almirah Med Steel with Shelves (FD- 1032) |
| 2 | Removing unserviceable shelves and replacing of new shelves made out of 1.0mm thick MS Sheet, shelves shall be fixed with welding/ screws and cleats incl painting, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 3 | Removing unserviceable locks and replacing with new locks 4 lever of brass Make : Godrej/Harrison or equivalent, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 4 | Removing unserviceable locking system and replacing with new locking system, 3 way locking device, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 5 | Removing of unserviceable handle CP and replacing with new handle CP, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 6 | Removing unserviceable foot rest and replacing with new foot rest made out of 1.0mm thick MS sheet and painting incl welding, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 7 | Scratching old paint and M&L for denting & painting to almirah med with two coat synthetic enameled Smoke Gray paint incl applying putty wherever required and one coat of primer. Make : Asian/Nerolac/Shalimar, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 8 | Almirah Steel Large with Shelves (FD-1031) |
| 9 | Removing unserviceable shelves and replacing of new shelves made out of 1.0mm thick MS Sheet, shelves shall be fixed with welding/ screws and cleats incl painting, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 10 | Removing unserviceable locks and replacing of new locks 7 lever brass Make : Godrej/Harrison or equivalent, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 11 | Removing unserviceable locking system and replacing of new locking system, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 12 | Removing unserviceable handle CP and replacing of new handle CP, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 13 | Removing unserviceable foot rest and replacing with new foot rest made out of 1.0mm thick MS sheet and painting incl welding, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 14 | Scratching old paint and M&L for denting and painting to almirah large with synthetic enameled Smoke Gray paint incl applying putty wherever required and one coat of primer. Make : Asian/Nerolac/ Luxor, complete all as specified and directed by Engr-in-Charge. |
| 15 | Table Office Officer Steel (FD-1003) |
| 16 | Removing of unserviceable top and fixing new top made out of 19mm thick both side prelaminated particle board (Exterior grade) teak face with PVC edging provided all around. Top size (1680 x 870mm) complete all as per drg and as specified and directed by Engr-in-Charge. |
| 17 | Repair/replacement of drawer made out of 1.0mm thick MS sheet (3 Nos for each table along with unserviceable locks and replacing of new locks 4 lever of ISI marked for each drawer/shutter and fixed with PVC handle incl painting with two coats of synthetic enameled Smoke Gray paint incl one coat of primer, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 18 | Removing Old Broken U/S rubber toes of Table Office Officer Steel and S &F new hard rubber toes of approved quality & fixed at the bottom of legs. complete all as per drg and as specified and directed by Engr-in-Charge |
| 19 | Table Office Clerk Steel (FD-1004) |
| 20 | Removing of unserviceable top and fixing new top made out of 19 mm thick both side prelaminated particle board (Exterior grade) teak face with PVC edging provided all around. Top size (1200 x 610 mm) complete all as per drg and as specified and directed by Engr-in-Charge. |
| 21 | Repair/Replacement of drawer made out of 1.0mm thick MS sheet (3 Nos for each table along with unserviceable locks and replacing of new locks 4 lever of ISI marked for each drawer/shutter and fixed with PVC handle incl painting with two coats of synthetic enameled Smoke Gray paint incl one coat of primer, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 22 | Removing Old Broken U/S rubber toes of Table Office Clerk Steel and S &F new hard rubber toes of approved quality & fixed at the bottom of legs. complete all as per drg and as specified and directed by Engr-in-Charge |
| 23 | Locker Bed Side Steel (FD-1027) |
| 24 | Removing unserviceable shelves and replacing of new shelves with welding incl painting complete all as per drg and as specified and directed by Engr-in-Charge. |
| 25 | Removing unserviceable hasp and staple and fixing new hasp and staple CP 75mm size, complete all as per drg and as specified and directed by Engr-in Charge. |
| 26 | Removing unserviceable handle and fixing new handle CP 100mm size , complete all as per drg and as specified and directed by Engr-in Charge. |
| 27 | Removing unserviceable foot rest and replacing of new foot rest with welding incl painting complete, complete all as per drg and as specified and directed by Engr-in Charge. |
| 28 | Removing of existing paint and M&L for denting and painting to locker bed side steel with two coat of synthetic enameled paint Smoke Gray grey incl applying putty wherever required and one coat of red oxide primer : Make of paint Asian/Nerolac/Luxo, complete all as specified and directed by Engr-in Charge. |
| 29 | Table Dining for Six Person (FD-273) |
| 30 | Removing unserviceable legs and fixing new legs made out of well seasoned 2nd class teak wood along with 50mm round plastic shoes incl polishing, complete all as per drg and as specified and directed by Engr-in Charge. |
| 31 | Removing of unserviceable top and fixing new top made out of 19mm thick both side pre-laminated particle board (Exterior grade) teak face with wooden beading provided all around of size 1800x900mm, complete all as per drg and as specified and directed by Engr-in Charge. |
| 32 | Repair/Replacing of stiffener, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 33 | Teapoy Sunmica Top (FD-278) |
| 34 | Removing unserviceable legs and fixing new legs made out of well seasoned 2nd class teak wood alongwith 40mm round plastic shoe incl. polishing, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 35 | Removing of unserviceable top and fixing new top made out of 19mm thick both side pre-laminated particle board (Exterior grade) teak face with wooden beading provided all around, complete all as per drg and as specified and directed by Engr-in Charge. |
| 36 | Repair/Replacing of stiffener made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 37 | Repair/Replacing of new frame(long rail and short rail), complete all as per drg and as specified and directed by Engr-in-Charge. |
| 38 | M&L for Polishing the Teapoy after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. |
| 39 | GI Charpoy Plywood Top (FD-220) |
| 40 | Removing of unserviceable 3 way elbow 32mm dia from existing GI pipe charpoy and replacing with new elbow, three way GI medium grade ISI marked for 32mm bore GI pipe as shown in drg and as directed by Engr-in-Charge. |
| 41 | Removing unserviceable long rail and supply and fixing new long rail made out of 32mm bore GI medium grade ISI marked as shown in drg and as directed by Engr-in-Charge. |
| 42 | Removing unserviceable short rail and fixing new short rail out of 32mm bore GI pipe extracted from long rail as obtained from Srl items No 8 (b ) above including necessary cutting and threading as shown in drg, complete all as specified and directed by Engr-in-Charge. |
| 43 | Removing unserviceable legs and fixing of new legs made out of 32mm bore GI pipe medium grade extracted from short rail as obtained from Srl items No.8 (c) above incl necessary cutting and threading and provn of shoe as shown in drg complete all as specified and directed by Engr-in-Charge. |
| 44 | Removing unserviceable plywood top from Charpoy GI Pipe and tightening the frame and S&F of new plywood commercial 12mm thick of size 1980x900mm commercial type ISI marked of best quality (Make : National/Century) with 65mm nut and bolt fixed to the frame incl welding of broken stiffener, as directed by Engr-in-Charge. |
| 45 | Removing unserviceable check nuts of 32mm dia and supply and fixing new check nut medium grade ISI marked as shown in drawing, complete all as specified and directed by Engr-in-charge. |
| 46 | Bed Ply Wood Top w/o FMN Set (FD-247) |
| 47 | Removing unserviceable long rail and fixing of new long rail made out of well seasoned 2nd class teak wood including polishing complete. Rest all as per drg , complete all as specified and directed by Engr-in Charge. |
| 48 | Removing unserviceable short rail and fixing of new short rail made out of well seasoned 2nd class teak wood including polishing complete. Rest all as per drg , complete all as specified and directed by Engr-in Charge. |
| 49 | Removing unserviceable plywood and fixing of new plywood 12mm thick commercial type ISI marked of size 1980x900mm Make : Kit Ply/National/Greenply,complete all as specified and directed by Engr-in Charge. |
| 50 | Repairing head rest side including legs and polishing, complete all as per drg and as specified and directed by Engr-in Charge. |
| 51 | Repairing leg rest side including legs and polishing, complete all as per drg and as specified and directed by Engr-in Charge. |
| 52 | Repair/Replacing of stiffener made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 53 | M&L for polishing the bed after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. |
| 54 | Chair Easy (FD-229) |
| 55 | Removing unserviceable front legs and fixing new front legs made out of well seasoned 2nd class teak wood along with 25mm round plastic shoe incl polishing, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 56 | Removing unserviceable rear legs and fixing new rear legs made out of well seasoned teak wood along with 25mm round plastic shoe incl polishing, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 57 | Repairing of seat frame, complete all as specified and directed by Engr-in-Charge. |
| 58 | Repairing of back seat frame, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 59 | Taking out old torn canning from seat and back of Chair Easy and recaning the same with 2mm thick cane and bordering with 4mm thick good quality cane plastic of shah brand, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 60 | M&L for polishing the chair easy after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. |
| 61 | Chair Dining (FD-279) |
| 62 | Removing unserviceable front legs and fixing new front legs made out of well seasoned 2nd class teak wood along with 25mm round plastic shoe incl polishing, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 63 | Removing unserviceable rear legs and fixing new rear legs made out of well seasoned 2nd class teak wood along with 25mm round plastic shoe incl polishing, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 64 | Repair/Replacing of new stiffener made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 65 | Repair/Replacing of new side rail made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 66 | Taking out old torn canning from seat of Chair Dining and recaning the same with 2mm thick cane and bordering with 4mm thick good quality cane plastic of shah brand or equivalent, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 67 | M&L for Polishing the Chair Dining after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. |
| 68 | Table Writing Medium (FD-275) |
| 69 | Removing unserviceable top and fixing new top made out of 19mm thick both side pre-laminated particle board (Exterior Grade) teak face with wooden beading provided all around, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 70 | Removing unserviceable legs and fixing new legs made out of well seasoned 2nd class teak wood alongwith 50mm round plastic shoe incl polishing, complete all as per drg and as specified and directed by Engr-in-Charge . |
| 71 | Repair/Replacing of new stiffener made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 72 | Repair/Replacing of new side long rail made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 73 | Repair/Replacing of new side short rail made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 74 | M&L for Polishing of Table writing medium after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. |
| 75 | Chair Tubular Steel with Arms (FD-75(M) |
| 76 | Removing unserviceable arms rest and S/F new arms rest made out of well seasoned 2nd class wood with two coat of synthetic enameled black paint best quality all as per drg and as directed by Engr-in-Charge. |
| 77 | Removing unserviceable seat and S/F new seat made out of well seasoned 2nd class teak wood duly caned with 2mm wide plastic cane as per Godrej pattern, including fixing the seat frame to the chair with 65 mm machine screw with nuts and washers, all as per drg and as directed by Engr-in-Charge. |
| 78 | M&L in repair providing new 2 Nos 10mm MS rod support duly welded between the seat and back portion of leg of the chair including 2 coats of synthetic enamel paint(Olive Green colour) over a coat of red oxide primer, all as specified and directed by Engr-in-Charge. . |
| 79 | Removing unserviceable back and S/F new back made out of well seasoned 2nd class teak wood duly caned with 2mm wide plastic cane as per Godrej pattern, including fixing the back frame to the chair with 65 mm machine screw with nuts and washers, all as per drg and as directed by Engr-in-Charge. |
| 80 | Painting of Steel frame of Chair CB with arm with two coat of synthetic enameled paint olive green duly scraping out old dirt/ stains all as directed by Engr -in- Charge. |
| 81 | Table Dressing Gents with Mirror (FD-230) |
| 82 | Removing of broken damaged knobs of table dressing Gents & S/F new chromium plated 35mm round knob of approved quality as directed by Engr-in-Charge. |
| 83 | Removing of damaged mirror of table dressing Gents & S/F New mirror of size 380x760x5.5mm thick as per Drg and as directed by Engr-in-Charge. (Make : Swastik/Saint Gobain/Modi Guard) |
| 84 | Removing of Broken Damaged back plywood of mirror of table dressing Gents & S/F new plywood BWR Gde 6mm thick including fixing of two Nos of Keys plate all as shown & Specified on Drg and as directed by Engr-in-Charge. |
| 85 | Sofa Chair with Arms (Single Seater) (FD-281) |
| 86 | Removing of Old Broken damaged hand rest of Sofa Chair with Arms & S/F new hand rest made out of 2nd class teak wood well seasoned rest all as per drg and as specified and directed by Engr-in-Charge. |
| 87 | Removing of Old foam cushion of Sofa Chair with Arms & supply & fixing of new polyurethane foam cushion of 40 density duly covered with upholsty fabric/tapestry cloth of approved shade/texture all as directed by Engr-in-charge. (Make of Cushion : SSF/Kuber/Kurlon/Sleepwell) |
| 88 | Removing of Old broken damaged legs of Sofa Chair with Arms & S/F New legs made out of 65x65x150mm well seasoned 2nd class teak wood all as per drg and as specified and directed by Engr-in-Charge |
| 89 | Table Centre (FD-274) |
| 90 | Removing unserviceable Top and Fixing new top made out of 18/19mm thick both side pre-laminated particle board (Exterior Grade) teak face, provided with wooden beading all around, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 91 | Removing unserviceable legs and fixing new legs made out of well seasoned 2nd class teak wood alongwith 25mm round plastic shoes incl polishing, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 92 | Repair/Replacing of new stiffener made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 93 | Repair/Replacing of new side long rail made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 94 | Repair/Replacing of new side short rail made out of well seasoned 2nd class teak wood, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 95 | M&L for Polishing of table center after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. |
| 96 | Double Bunker Bed Steel (TP) |
| 97 | Removing Old Ply from Charpoy Double Bunk Steel and tightening the frame and S/F of new Plywood commercial type 12mm thick of size 1980x900mm ISI marked (Make : Kitply/National/Greenply/Century) with 10 Nos 65mm nut and bolt to the frame and incl welding of 02 Nos of Stiffener made out of flat iron 40mm x 6mm thick incl drilling holes etc, complete all as specified and directed by Engr-in-Charge. |
| 98 | Chair Revolving Steel with Arms (High/Med/Low Back) (TP) |
| 99 | M&L for removing the existing broken leg portion consisting wheel of chair revolving steel and welding the broken prolonged legs and replacing the broken wheels by welding/screwing and fixing the legs duly black painted. Greasing of all moveable parts shall be done, All as specified and directed by Engr-in- Charge. |
| 100 | Removing of old Hydraulic system from Chair Revolving Steel and fixing with new Hydraulic system, complete all as specified and directed by Engr-in-Charge. |
| 101 | Repair/Replacing New back of chair Revolving Steel made out of high density cool foam of size 50mm thick including all back portion covered with tepestry cloth , All as per sample and directed by Engr-in- Charge. |
| 102 | Repair/Replacing New Seat of Chair Revolving Steel made out of high density cooled foam of size 75 mm thick including all seat portion covered with tapestry cloth , All as per sample and directed by Engr-in- Charge. |
| 103 | S&F in repair new handle of chair Revolving Steel made out fiber, All as per sample and directed by Engr-in- Charge. |
| 104 | Locker Wooden (FD-222) |
| 105 | M&L for removal of the existing damaged handles and hasps and staples of locker complete and replacing the same with new pair of bow handles aluminum anodised 100mm long and aluminum anodised 75mm long hasps and staples duly fixed to the shutters all as shown in drg and as specified and directed by Engr-in- Charge. |
| 106 | M&L for replacing old top with new Top of Locker Wooden made of 12mm thick plywood both faces commercial BWR type including two coats of natural french polish over one coat of wood filler with glossy finish matching to all components and all as shown in drg and as specified and directed by Engr-in- Charge.(Make: Greenply/Kitply ISI mark) |
| 107 | M&L for replacing old bottom portion with new bottom of Locker Wooden made of 12mm plywood both faces commercial BWR type including two coats of natural french polish over one coat of wood filler with glossy finish to all components and all as shown in drg and as specified and directed by Engr-in- Charge..(Make: Greenply/Kitply ISI Mark) |
| 108 | M&L for replacing old shutter with new shutter of Locker Wooden made of 6mm plywood both faces commercial BWR type with hinges both brass 50mm long including two coats of natural french polish over one coat of wood filler with glossy finish to all components and all as shown in drg and as specified and directed by Engr-in- Charge..(Make: Greenply/Kitply ISI Mark) |
| 109 | M&L for replacing old side portion with new side portion of Locker Wooden made of 6mm plywood both faces commercial BWR type including two coats of natural french polish over one coat of wood filler with glossy finish to all components and all as shown in drg and as specified and directed by Engr-in- Charge..(Make: Greenply/Kitply) |
| 110 | M&L for removal of broken base incl all the four legs of locker and replacing the base with 4 legs made of 2nd class teak wood with 40 x 25 stiffener on all 4 sides fixed below the bottom portion of the locker 610 mm long on both wider portions and 450 mm on the deeper portions with 4 legs also made of 2nd class teak wood each measuring 75mm long 50 x 50 mm at top tapering to 40 x 40mm at bottom and french polishing all exposed surfaces and fixed at the base all as shown in drg and as specified and directed by Engr-in- Charge.. |
| 111 | Peg Table (FD-277) |
| 112 | M&L for removal of the existing damaged top of peg table and replacing the same with new top 18/19mm thick pre-laminated particle board 450 x 300 mm size with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides incl french polishing teak wood edging and as shown in drg and as specified and directed by Engr-in-Charge. |
| 113 | M&L for removal of the existing damaged any one leg of peg table and replacing the same with new leg 362 mm long x 30mm x 50mm 2nd class teak wood and all exposed surfaces french polished and fixed all as shown in drg and as specified and directed by Engr-in-Charge. |
| 114 | M&L for Polishing the Peg Table after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. |
| 115 | Rack Steel Open Large Six Shelves (FD-1038) |
| 116 | Removing unserviceable shelves and replacing of new shelves of Rack Steel Open Large made out of 1.0mm thick MS Sheet. Shelves shall be fixed with welding/nut & bolt incl painting , complete all as specified and directed by Engr-in-Charge. |
| 117 | M&L for denting and painting to Rack Steel Open Large six Shelves with primer of old paint and repainting with two coat of synthetic enameled Smoke Gray paint and incl one coat of primer. Make : sian/Nerolac/Luxor/Borolac/Shalimar, complete all as specified and directed by Engr-in-Charge. |
| 118 | Sofa Set Five Seater with Cushion (FD-281) |
| 119 | Removing the unserviceable front legs of sofa set, S&F new 2nd class teak wood legs made to shape all as per drg and as directed by Engr-in-Charge. |
| 120 | Removing the unservicealbe rear legs of sofa set, S&F new 2nd class teak woodlegs made to shape all as per drg and as directed by Engr-in-Charge. |
| 121 | Removing the unservicealbe arms of sofa set, S&F new 2nd class teak wood legs made to shape all as per drg and as directed by Engr-in-Charge. |
| 122 | Removing the unservicealbe Stiffeners of sofa set, S&F new 2nd class teak wood legs made to shape all as per drg and as directed by Engr-in-Charge. |
| 123 | Removing the unservicealbe front and back rail of sofa set, S&F new 2nd class teak wood legs made to shape all as per drg and as directed by Engr-in-Charge. |
| 124 | Removing the unservicealbe side rail of sofa set, S&F new 2nd class teak wood legs made to shape all as per drg and as directed by Engr-in-Charge. |
| 125 | S&F 100mm thick cushions (seat & back), 50 density cushion of size as per drg including linning inside with new tapestry cloth as per approved shade dulystiched and provided with nylon zip for sofa set 5 seater cushion should be brought to store in original company packing & stitching should be done in store. Make- Sleepwell, Kurlon, Duroflrx.Note: The cost of acrylic tapestry shall not be less than Rs 500/- per meter of 48'' wide (total 10 Nos of cushion per seat) |
| 126 | Removing of unserviceable cushion cover from sofa cushion, S&F new cushion cover of approved shape and fabric as approved by Engr-in-Charge. |
| 127 | Table Bed Side (FD-248) |
| 128 | Removing unserviceable shelves and replacing of new shelves made out of prelaminated board. Shelves shall be fixed with nails.Complete all as specified and directed by Engr-in-Charge. |
| 129 | Foam without back (FD-71M) |
| 130 | Removing unserviceable planks and replacing of new wooden planks made out of first class hard wood. And painting the iron frame with black or olive green paint. Complete all as specified and directed by Engr-in-Charge. |
| 131 | Chair Writing (FD-280) |
| 132 | Removing unserviceable front legs and fixing new front legs made out of well seasoned teak wood alongwith 50mm round plastic shoe incl polishing, complete all as specified and directed by Engr-in- Charge. |
| 133 | Removing unserviceable rear legs and fixing new rear legs made out of well seasoned 2nd class teak wood alongwith 50mm round plastic shoe incl polishing, complete all as specified and directed by Engr- in - Charge. |
| 134 | Repair/Replacing of Stiffener and fixing of new stiffener as well seasoned teak wood, complete all as specified and directed by Engr - in- Charge. |
| 135 | Repair/Replacing of back rest stiffener and fixing new back rest as well seasoned 2nd class wood, complete all as specified and directed by Engr - in-Charge. |
| 136 | Repair/Replacing of U/S arms and fixing of new arms made out of well seasoned teak wood, complete all as specified and directed by Engr-in- Charge. |
| 137 | S & F in repair of side rail and fixing of new side rail, complete all as specified and directed by Engr-in- Charge, |
| 138 | Taking out Old torn canning from seat of Chair Writing and recaning the same with 2mm thick cane and bordering with 4mm thick good quality cane plastic of shah brand or equivalent, complete all as per drg and as specified and directed by Engr-in-Charge. |
| 139 | M&L for Polishing the Chair Writing after rubbing the surface with emery paper and applying french polish of best quality, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender