Tender For Provn Of Three Tier Washing System And Certain Work Under Different Location At Af Stn Phalodi.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Sep 2026
11 days left
EMD
66340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Three Tier Washing System And Certain Work Under Different Location At Af Stn Phalodi.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF), Air Force Station, Phalodi Name of Work :PROVN OF THREE TIER WASHING SYSTEM AND CERTAIN WORK UNDER DIFFERENT LOCATION AT AF STN PHALODI. Contract No: GE (AF) PHALODI/ OF 2026-27 Serial Page No. Bidder Name : SCHEDULE 'A'(BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT TEXT # NUMBER TEXT NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER NUMBER # TEXT Srl.No. Item Description Item Code / Make Approx No of Units reqd Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for Excavating over areas, n exc 1.5 m deep and getting out soft loose soil complete all as specifed and directed. |
| 3 | M&L for Removing excavated material exc. 50 m but n exc. 100 m anddepositing where directed complete all as specifed and directed. |
| 4 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specifed and directed. |
| 5 | M&L PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations, filling & mass concrete complete all as specified and directed. |
| 6 | M&L RCC (1 : 1.5 : 3) type A1 (using 20mm graded stone aggregate) in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs and mass concrete complete all as specified and directed. |
| 7 | M&L RCC (1: 1.5 :3) type (using A1 using 20 mm aggregate) for Walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilaster and buttresses complete. |
| 8 | M&L RCC (1 : 1.5 : 3) type A1 (using 20mm graded stone aggregate) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as pecified and directed.. |
| 9 | M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specifed and directed. |
| 11 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specifed and directed. |
| 12 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed and directed. |
| 13 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in mortar 1:4 , complete all as specified and dirceted |
| 14 | M&L for 15mm thick in CM 1:4 rendering on fair faces of brick or concrete surfaces finished even and smooth (without using extra lime or cement) on wall complete all as specified and dirceted. |
| 15 | Supply only liquid water proofing compound as per manfacture instruction complete all as specified and dirceted. |
| 16 | M&L for machine cut Dholpur stone 25-30mm thick in flooring over 15 mm thick screed in CM(1:4) and laying, Joint filling silicon , polishing, rubbing & including silicon treatment complete all as specified and directed. |
| 17 | M&L for Dholpur stone 25-30mm thick in flooring , cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm & n exc 0.5 Sqm area fixed with and including one number SS clamps (grade - 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and dirceted. |
| 18 | M&L for Z black one side polsihed granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and skirting over platforms and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade , the clear area of granite stone will be measured for payment complete all as specified and dirceted. |
| 19 | M&L for jodhpur sand stone 50-55mm mm thick in flooring sand stone slabs polished, set and jointed in cement and stone dust mortar CM(1:3) and pointed in cement mixed with approved pigment to match complete all as specified and dirceted. |
| 20 | M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 21 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 22 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, chains etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 23 | M&L for stages water proof treatment to concrete and plastered surfaces by Providing and carry out waterproofing treatment to existing new surface slab Brushbond RFX - Two component, High performance elastomeric cementitious waterproof coating supplied in 20.088 kg pack (15 kg powder+5.088 kg Polymer) available in grey color. System includes proper surface preparation, carry out cementitious injection grouting at leakage points using Cebex 100-Plasticised expandive grout admixture supplied in 225 gm packet, treatment of construction joints using polymer modified mortar prepared by using Nitobond SBR Latex, application of polymer modified vatta at floor-wall junction prepared by using Nitobond SBR Latex-Screed modifier cum bonding agent, filling pipe cutouts using Conbextra GP2-Non-shrink cementitious grout, predampen the concrete surface, mix and apply two coats of Brushbond RFX incorporating 45 GSM Glass Fibre Mesh in between two coats at coverage 12-14 sqm per pack using suitable brush or roller to achieve over all 1 mm thickness. Cured Brushbond RFX shall comply with ASTM D4060, ASTM D4541, ASTM D638,ASTM C836 and possess below properties: Mixed density: 1.68 g/cc, Adhesion to concrete-> 1 N/mm2,Non-toxic,Static crack accommodation-1 mm complete all as specified and directed.Note : (Above process will be carried out by authorised applicator.) |
| 24 | M&L for textured outdoor wall tiles 7-8 mm thick of aprroved shade and size over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. |
| 25 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed. |
| 26 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose or hard dence soil complete all as specified and directed. |
| 27 | Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 28 | Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches. (Note :- Punning thickness shall be measured.) |
| 29 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm across the cable in trenches complete as specified and directed. |
| 30 | Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor,1100 volts grade, of size 16 sqmm x 2 core complete as specified and directed. Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) The Rate of Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection deemed to be included in unit quoted rate |
| 31 | M & L for Boring of holes under road, pavement, hard standing by using suitable tools and machinery for laying of pipe/Cable complete all as specified and as directed .Note :- GI pipe shall be measured and paid in concern Item |
| 32 | S&F of GI Tubes of size 50 mm bore ,ISI MARKED medium grade, galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 33 | S&F of GI Tubes of size 25 mm bore ,ISI MARKED medium grade, galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 34 | S&F of 50 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as specified and directed. |
| 35 | supply and fixing Openwell Pump, , electric driven, 2 HP,single phase,18 mtr head 320 LPM Discharge for fixing complete as specified and directed. |
| 36 | S & F of automatic star delta DOL motor starter in steel sheet enclosure AC Single phase, 415 Volts, 50 Hz type MUG with single phase preventer, dry run preventer, overload protection, reverese phase protection suitable for 2 HP Centrigugal pump set complete all as specified and directed. |
| 37 | Supplying, laying & jointing submersible cable flat type, copper conductor of size 6 Sqmm 3 core complete all as specified & as directed. |
| 38 | M&L Submersible fountain Light LED underwater adjustable ,colourfullandscape,spotlight,IP68 waterproof submersible light complete all as specified & as directed. |
| 39 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall Split type Unitary Air conditioning complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (Closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 155V to 280V operating voltage with low & high voltage cutoff and 50 Hz, 1 Phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary/ twin rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Deg C. Min 10 years Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply: Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, Hermetic compressor IS 10617, Heat exchanger IS : 11329, Capacitor IS : 2993 and Motor IS : 12615 complete as per CPWD Specification and IS : 1391 Part II 2023. The system shall be able to operate up to 55 Deg C (Out door ambient temperature) with following detailed specification:(i) Inverter type, Cooling only Model of Capacity 2.0 TR with BEE 5 Star Rating(ii) Evaporator and Condenser Coil Material: Copper(iii) Rated Cooling at 100% Capacity (Min-Max): 1760 Watt to 7740 Watt(iv) Rated Cooling at 50% Capacity: Minimum 3520 Watt(v) Rated Operating Current: 1.8 A to 10.2 A(vi) ISEER Energy Efficiency Rating: Min 5.60(vii) Noise level of Indoor Unit: 27-49 dB(viii) Indoor Air flow Range (Min-Max): 290 CFM to 858 CFM (ix) Moisture Removal Capacity: 1.8 l/h (x) Maximum Weight of Indoor Unit: 16 Kg (xi) Maximum Weight of Outdoor Unit: 39 Kg (xii) ODU to IDU control wiring (Copper): Minimum 1.5 Sqmm, 4 Core (xiii) Minimum additional refrigerant charge: 20 g/mMake: OGENERAL (IDU Model No: ASGG24CEAC-B, ODU Model No: AOGG24CEAC-B)/ MITSUBISHI (IDU Model No: MSY-GZ18VF, ODU Model No: MUY-GZ18VF)/ any equivalent Model conforming ibid specification of other Make |
| 40 | S&F Copper pipe size 1/4\\" size including connected two copper pipe by brazzing complete all as specified and directed. |
| 41 | S&F Copper pipe size 1/2\\" size including connected two copper pipe by brazzing complete all as specified and directed. |
| 42 | Supply and fixing Modular switch socket combination with three pin plug top suitable for split AC with ON-OFF starter complete all as specified & directed .Make Crebtree and equivalent specificaation. |
| 43 | S&F in PVC insulated 3 core copper PVC insulated Cable of size 4 sqmm flexible cable 1100 Volts and confirming to IS :694 complete all as specified and directed. |
| 44 | Material & Labour for Sub main wiring with 2 runs of 4.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC casing caping ISI marked size 20mm with accessories fixed on wall/roof and one run of 4.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor complete all as specified and directed. Note : Two runs of 4.0 Sqmm cable, one run of 4.0 Sqmm earth conductor and one run of PVC casing caping of 20mm shall be measured and paid as one unit length. |
| 45 | Material & Labour for Sub main wiring with 2 runs of 6.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC casing caping ISI marked size 20mm with accessories fixed on wall/roof and one run of 6.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor complete all as specified and directed. Note : Two runs of 6.0 Sqmm cable, one run of 6.0 Sqmm earth conductor and one run of PVC casing caping of 20mm shall be measured and paid as one unit length. |
| 46 | S&F for MCB SP 240 volts 6-32 Amps MCCB, MCB with GI hardware fixed in DB's of the undermentioned type and rating acomplete as specified and directed |
| 47 | S&F for MCB TPN 40-100 Amps, 415 volt MCCB, MCB with GI hardware fixed in DB's of the undermentioned type and rating acomplete as specified and directed |
| 48 | Supply and fixing Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the DB 8 way SPN with 200 amps rated busbar 240 volts (double door type) complete all as specified and directed. |
| 49 | Supply fixing and installation Air conditioner controller timer suitable for 2 AC single phase 240 Volt with digital display complete all as specified and directed. |
| 50 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of the size 25 sqmm 4 core omplete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) The Rate of Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection deemed to be included in unit quoted rate. |
| 51 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of the size 16 sqmm 4 core omplete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) The Rate of Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection deemed to be included in unit quoted rate. |
| 52 | Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m depth or n. exc 10 Sqm on plan and n exc 1.5 m in depth for foundation, in any type of soil & getting out, complete all as specified and directed. |
| 53 | M&L for 100 mm thick cement concrete (1:4:8) type D2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 54 | M&L for Reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in foundation,footing,bases for column etc. complete all as specified and directed. |
| 55 | M&L for Reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in column , pillars, piers, posts and struts etc. complete all as specified and directed. |
| 56 | M&L for Reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in Beams, cantillevers, bressmmers, lintels over 1.5 m span etc. complete all as specified and directed. |
| 57 | M&L for Mild steel bars 6mm to 8 mm cut to length,bend to shape required, including cracking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips as in stirrups complete all as specified and directed. |
| 58 | Formwork to sides of pillars,posts,struts,piers,columns and stanchions for fair and finished surfacess, complete all as specified and directed. |
| 59 | Formwork to sides and soffits of floor or roof beams, beam haunching,girders, bressummers, lintels,cantilevers, sheleves including support, overhangs,etc also splays between floors and beams ,etc for finished surfaces complete all as specified and directed. |
| 60 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs,floor slabs,landings and similar work not exc 200mm thick for finished surfaces complete all as specified and directed. |
| 61 | M&L for Precast cement concrete type C1 1:3:6 (using 20mm graded stone aggregate)as in block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 62 | M &L for Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick ,spread , levelled and rammed includind watering complete all as specified and directed. |
| 63 | M&L for 100 mm thick cement concrete (1:4:8) type D2 (using 40mm graded aggregate) as in floors , pavings , sub bases etc complete all as specified and directed. |
| 64 | M&L for cement concrete (1:3:6) type C2 nominal mix (using 40mm graded aggregate) as in floors , sub bases etc complete all as specified and directed. |
| 65 | Dismantling of brick work or block masonry built in cement mortar complete all as specified and directed. |
| 66 | Demolition of Reinforced cement concrete of any description in any position not as specially provided complete all as specified and directed. |
| 67 | M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base 20 mm thick in cement mortar (1:6), laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 68 | M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/rectangular) polished area of each tiles not exc 0.36 sqm, but on vertical surfaces over 10mm Screeding in CM 1:3 on fair faces of brick work or concrete surfaces and finishing the surfaces fair and even complete all as specified and directed. |
| 69 | M&L rendering 10 mm thick in CM 1:6 on fair face of brickwork or concrete surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 70 | M&L for 15mm thick Rendering in two layers of 10mm thick and 5 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) second layer mixed with WPC/water proofing chemical as per manufacturer's instruction complete all as specified and directed. |
| 71 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004,Alkali & fungal resistance , dirt resistance exterior paint of required shade(company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 72 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer with 1.50 mm thick wall putty to achieve smooth finish in internal surface complete all as specified and directed. |
| 73 | M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 74 | M&L for Preparation of new plastered surfaces on celling and applying two coat of oil bound distemper over a coat of primer with 1.50 mm thick putty to achieve smooth finish complete all as specified and directed. |
| 75 | M&L for 10mm thick cement plaster in CM 1:3 mixed with liquid water proofing admixture as per manufacture's instruction on roof surfaces and finishing even and fair to receive APP membrane complete all as specified and directed(Note- LWPA shall be measured and paid separatly) |
| 76 | S&F for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over compatible primer at 0.3 litr /sqm,torching the membrane on whole surface uniformly while unrolling the membrane by LPG and seaaled with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over the membrane.The overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively.all the angles,abutments and the drainage outlets shall be sealed with extra care to ensure full bondage complete all as specified and directed. |
| 77 | M&L for Granite(of any type) work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cement screed 15 mm thick in CM 1:4 complete all as specified and directed. |
| 78 | M&L for kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick rendering in cement mortar (1:4), laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 79 | S&F sinks made of stainless steel Kitchen Sink 32x20x10 inch of single bowl sink heavy duty for kitchen basin with brushed matte finish including coupling, hose pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size complete all as specified and directed. |
| 80 | Taking down chowkates or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed. |
| 81 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premisses complete all as specified and directed. |
| 82 | Dismantling of stone slab and tiles of any description or thickness in floors, slabs etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 83 | M&L for Anodised aluminium powder coating of any colour frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 84 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 85 | S&F in repairs Grating doom 100mm dia PTMT(minimum weight 25gms) complete all as specified and directed. |
| 86 | Demolition cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 87 | M&L for 75 mm thick Cement concrete 1:3:6 type C-2(using 20 mm graded stone aggregate ) as in plinth protection,pavings, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 88 | Taking down cement plaster or cement lime plaster on brick,stone, concrete surface or PCC walls etc. including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 89 | Supply only integral water proofing compound of approved quality complete all as specified and directed. |
| 90 | Taking up or down 20mm bore steel water tubing galvanised and connections including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 91 | Taking up or down 15 mm bore steel water tubing galvanised and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 92 | S & F Steel water tubing galvanised 15 mm bore ,medium grade fixed to wall and celing or in floors including fittings complete all as specified and directed. |
| 93 | S & F Steel water tubing galvanised 20 mm bore ,medium grade fixed to wall and celing or in floors including fittings complete all as specified and directed. |
| 94 | Taking up or down 25mm bore steel water tubing galvanised and connections including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 95 | S & F Steel water tubing galvanised 25 mm bore ,medium grade fixed to wall and celing or in floors including fittings complete all as specified and directed. |
| 96 | M & L RCC 1:2:4 nominal mix (20 mm graded stone aggregate) Type B1 for slabs supported on walls , beams and columns etc complete all as specified and directed. |
| 97 | S& F in Repairs Pillar taps,15 mm cast copper alloy, with capstan heads, chromium plated,fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 98 | S&F of Waste coupling of 40 mm dia of discharge pipe complete all as specified and directed. |
| 99 | S & F of Swan neck with 360 degree swivel spout kitchen sink tap of Piller tap Model no Alton GRC3755-UL or Similar type complete all as specified and directed. |
| 100 | M&L for Reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in Chajjas complete all as specified and directed. |
| 101 | M&L for Formwork to chullah hood,chajjas , trough and similar items including edges for fair finished surfaces complete all as specified and directed. |
| 102 | M&L for Rounding to edges of granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 103 | S&F Sheet glass 4mm thick ordinary quality and glazing with beading in squares n.exc 0.5 Sq.m in each pane complete all as specified and directed. |
| 104 | M&L for 18/19 mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed with screws to timber frame work complete including all fittings complete all as specified and directed. |
| 105 | S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed. |
| 106 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 107 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150mm complete all as specified and directed. |
| 108 | M&L for 150 mm bore reinforced concrete pipe, class NP2 laid & jointed complete with collars complete all as specified and directed. |
| 109 | Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (150 mm) bore complete all as specified and directed. |
| 110 | Removing the existing roof treatment of any description completely and remove all the debris from site and rubbish off the premises complete all as specified and directed. |
| 111 | M &L for Providing, cement concrete 1:2:4 type B0(using 12.5 mmgraded stone aggregate)as in padding/levelling course over roof slab mixed with water proffing admixture as per manufature instruction complete all as specified and directed.(Note- LWPA shall measured and paid separatly ) . |
| 112 | S&F PVC (SWR) floor trap plain 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed. |
| 113 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, plain with grating including jointing with solvent cement, including jointing waste pipe fixed in cement concrete 1:2:4, type B-1 using 20mm graded aggregate complete all as specified and directed. |
| 114 | S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall complete all as specified and directed. |
| 115 | M&L for complete removal of existing treatment on walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004,Alkali & fungal resistance , dirt resistance exterior paint of required shade(company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over complete all as specified and directed. |
| 116 | M & L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer with 1.50 mm thick wall putty to achieve smooth finish complete all as specified and directed. |
| 117 | S&F in repairs Stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed. |
| 118 | S & F in repair bib taps 15mm bore dia of pipe, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 119 | S&F in repairs 20 mm bore dia of pipe Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 120 | S&F in repairs 25 mm bore dia of pipe Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 121 | S&F in repair 15 mm bore dia of pipe fancy type chromium plated concealed type stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 122 | S&F 25mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 123 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 124 | S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 125 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wdn beads in square n.exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames complete all as specified and directed. |
| 126 | S&F of stainles steel kitchen Soap dish type fancy (model Style name sink caddy soap dish ) complete all as specified and directed. |
| 127 | S&F of fancy made Kitchen wall mount sink mixer tap receving hot or cold (model Altron GRC3770-UL)- 360 degree/Jaquar Wall mounted Sink Mixer swivel Spout or smillar type , complete all as specified and directed. |
| 128 | M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for manholes/soakage well and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed.Note:- Reinforcement steel will be measured & paid separately. |
| 129 | M&L for cleaning and desilting of manholes depth not exceeding 1.50 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt, sludge & other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed. |
| 130 | M&L for cleaning and desilting of sewage lines 150 mm dia of any size and shape upto any depth by pumping out /removing liquid waste/sewage, plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MOD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with freah water etc complete all as specified and directed. |
| 131 | M&L for providing 100 mm Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floors and pavings or similar work etc.complete all as specified and directed. |
| 132 | S & F Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars, barred iron doors, ladders, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 133 | M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed. |
| 134 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified and directed. |
| 135 | M&L for providing and fixing stainless steel(grade 304) railing made of hollow tubes , channels,plates etc including welding,griding,buffing polishing and making curvature(when required ) and fitting the same with neccesary stainless steel nuts and bolits complete, including fixing the railing with necessary acceries & stainless steerrengementl dash fasteners, stainless steel bolts etc , of required size , on top of floor or the sides of waist slab with suitable arrengement complete all as specified and directed. |
| 136 | M&L for 25 mm thick cement concrete (1:4:8) type D2 (using 40mm graded aggregate) as in floors , pavings , sub bases etc complete all as specified and directed. |
| 137 | S&F of Waste pipe for kitchen wash basin ( model 35inch collapsible model altronALD220) or similar poduct complete all as specified and directed |
| 138 | S&F in repair Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over 15mm screed bed 1:4 complete all as specified and directed by Engineer-in-charge. |
| 139 | S&F rotational moulded polythylene 500 litres capacity liters water storage tanks tripple layer (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Part -I complete all as specified and directed. |
| 140 | Supply and fixing of Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket, one single pole 20 Amps, 240V MCB, 'C' curve type AC box repturing capacity 10 KA complete all as specified and directed. |
| 141 | S&F water heater storgae type, electric driven capacity 50 Litre complete all as specified and directed. |
| 142 | M&L PVC connection 15 mm size with PTMT nuts of length 300 mm complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender