Tender For Repair/Maintenance Flooring Tiling And Connected B/R Work At Adm Area At Lansdowne.
Tender Value
14.80 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
29600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Flooring Tiling And Connected B/R Work At Adm Area At Lansdowne.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed. |
| 2 | M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 mm thick, as in dado etc including 10 mm thick rendering as in backing coat in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects.Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) Complete all as specified and directed |
| 3 | M&L for Non- skid coloured ceramic tiles 400x400x7 to 8mm thick in floor etc including 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects.Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I).Complete all as specified and directed |
| 4 | M&L Virified Ceramic tiles light colour 600x600x10 mm thick (square/ rectangular) polished,in floors including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 5 | M&L Virified Ceramic tiles light colour 600x600x10 mm thick (square/ rectangular) polished,in skirting including 10mm thick backing coat in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded in any mortar complete all as specified and directed. |
| 7 | M&L Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 8 | M&L edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and as directed. |
| 9 | M&L for 75 mm thick PCC (1:4:8) type D2, (using 40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 10 | M&L for chequered cement concrete tiles 300X300X25 mm thick,(ISI Marked) rubber finished as in floors laid over 20 mm thick screed bed in cement mortar 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the tiles complete all as specified and directed |
| 11 | M&L for 60mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block, M-35 Grade with pre-polished, coloured/ laquar finish any shape and size, as approved confirming to IS 15658-2006 complete all as specified and directed. |
| 12 | M&L for sand filling under paver block including watering and consolidation complete all as specified and directed. |
| 13 | Taking up or down steel water tubing (GI Pipe) and connections of following bore complete all as specified and as directed :- |
| 14 | 15mm bore |
| 15 | 20mm bore |
| 16 | M&L cutting chases, stone concrete block or slab wall pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 17 | S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :- |
| 18 | 15mm bore |
| 19 | 20mm bore |
| 20 | S&F in repair 15 mm bore bib taps, chromium plated (ISI marked), fancy type, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 21 | S&F in repair 15mm bore angular stop valve with flange, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 22 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated , Fancy type screwed down for pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed. |
| 23 | S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. |
| 24 | S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 25 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 26 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 27 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 28 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for preparation of newly plastered surfaces of internal wall and applying two coats of oil emulsion distemper over a coat of alkali resistent primer using roller complete all as specified and directed. |
| 30 | M&L for preparation of old plastered surfaces of internal wall and applying two coats of oil emulsion distemper over a coat of alkali resistent primer using roller complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender