Tender For Periodical Services To Mgs Enclave, Hq Sub Area Officer Mess Complex & Cubs Corner At Haldighati Lines In Zone Iii Area Under Ge(S) Jaipur At Mil Stn Jaipur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Mgs Enclave, Hq Sub Area Officer Mess Complex & Cubs Corner At Haldighati Lines In Zone Iii Area Under Ge(S) Jaipur At Mil Stn Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | M&L Post Construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 2 | M&L for applying smartcare Hydroloc damp proof in two coats over old or newly plastered surfaces including preparation of surfaces for treating dampness and efflorescence as per manufacturer's instruction complete all as specified and as directed. |
| 3 | M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for 15 mm thick in cement mortar 1:4 rendering on fair faces of brick work or concrete surface of wall finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for rendering 10 mm thick in CM 1:3 as in ceiling surface and finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for preparing of old decorated surfaces of wall by complete removal including cornices plaster and other wall features by washing, rubbing down and stopping of distmpered, surface to be repaired by filling putty in holes & depression if required, to obtain even and uniform surface etc and applying two coats of Plastic Emulsion Paint white or tinted over a coat of alkaline resistance primer including necessary arrangement such as scaffolding, trestles, ladders etc complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment by mechanical sanding/scrapping using an electrically operated wall sander fitted with an integral dust extraction/vacuum system, variable speed not less than 1500 RPM, using suitable abrasive standing pad (80 grit or as recommended by the manufacturer depending upon the condition of existing surface) to remove loose paint, chalking and other surface contaminants and to prepare the surface for repainting and apply water proof cement based wall putty of approved make in an average thickness of 1 mm to obtain an even and smooth surface, allowing proper drying. Thereafter applying two coat of acrylic emulsion exterior grade weather proof paint by airless spray application using a high-pressure airless spray machine having a maximum working pressure of not less then 3300 PSI, complete with suitable spray gun, hose and accessories capable of achieving a uniform finish, including difficult to reach areas, all in accordance with manufacturer recommendation and directed and including all necessary surface preparation, protection of adjacent surface, masking, scaffolding, staging, ladders, trestles, cleaning of splashes from floor, doors, windows, furniture etc for building upto three storeys complete all as specified and directed by Engineer-in-Charge.Note :-(I) Mechanical sanding shall be carried out using a wall sander fitted with an effective dust extraction system to minimise dust pollution.(ii) The airless spray equipment shall be of a reputed manufacturer and suitable for application acrylic emulsion exterior grade weather proof paint as recommended by the paint manufacturer.(iii) Measurement shall be taken on the finished surface area actually treated. |
| 9 | M&L for preparation of old (plastered or unplastered) surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 10 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper (OBD) complete all as specified and directed. |
| 11 | M&L for preparation of new surface of ceiling of any description and applying two coats of oil bound distemper (OBD) over and including 1 mm thick wall putty all as specified and directed. |
| 12 | M&L for preparation of new plastered surfaces of wall and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment and preparation of old surface of wall of any description and applying two coats of oil bound distemper (OBD) over a coat of primer and including 1 mm thick wall putty all as specified and directed. |
| 14 | M&L for preparation of new surface of walls of any description with a coat of 1 mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 15 | M&L for preparation of old plastered external surfaces of walls and applying one coat of acrylic emulsion exterior grade weather proof paint complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 16 | M&L for preparation of old plastered surfaces of walls by complete removal and finishing of walls with textured paint of required shade of two or more coats applied @ 3.28 ltr/10 sqm over and including priming coat of exterior primer (applied @ 2.20kg/10 sqm) complete all as specified and directed. |
| 17 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 18 | M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler with two or more coats till shining complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender