Tender For Provn Of Trg Shed With Flooring And Provn Of Path For Single Living Jcos Accn Under Ge (North) Bathinda At Bathinda Mil Stn
Tender Value
47.89 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
95760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Trg Shed With Flooring And Provn Of Path For Single Living Jcos Accn Under Ge (North) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed |
| 2 | Excavation in post holes in any type of soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces complete all as specified and as directed. |
| 3 | Providing and laying PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate in foundation filling and mass concrete, including preparation of bed, proportioning, mixing, laying, compacting, finishing and curing, including all materials, labour, tools, plant and incidental operations, complete in all respects as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and labour for providing and laying reinforced cement concrete (RCC) of Grade M-30, design mix, in foundations including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles, mass concrete and similar works, including mixing, transporting, placing, compacting by mechanical vibration and curing, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The design mix for M-30 grade concrete shall be submitted by the Contractor and shall be subject to approval by the Accepting Officer before commencement of the work. |
| 5 | Material and labour for providing and laying reinforced cement concrete (RCC) of Grade M-30, design mix, in columns, pillars, piers, posts, struts and similar vertical structural members, including mixing, transporting, placing, compacting by mechanical vibration and curing, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The design mix for M-30 grade concrete shall be submitted by the Contractor and shall be subject to approval by the Accepting Officer before commencement of the work. |
| 6 | Material and labour for providing and laying reinforced cement concrete (RCC) of Grade M-30, design mix, in beams, cantilevers, bressummers, lintels exceeding 1.5 m span and similar structural members, including mixing, transporting, placing, compacting by mechanical vibration and curing, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The design mix for M-30 grade concrete shall be submitted by the Contractor and shall be subject to approval by the Accepting Officer before commencement of the work. |
| 7 | Material and labour for providing, erecting, using and dismantling formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, including sides and soffits, where required, of foundation and plinth beams and similar works, whether vertical or battered, properly supported, aligned and levelled to receive fair-faced concrete finish, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 8 | Material and labour for providing, erecting, using and dismantling formwork to sides of pillars, posts, struts, piers, columns, stanchions and similar vertical structural members, including all necessary supports, ties, clamps, props and accessories, properly aligned and levelled to receive fair-faced concrete finish, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 9 | Material and labour for providing, erecting, using and dismantling formwork to the sides and soffits of beams, including all necessary supports, props, ties, clamps and accessories, properly aligned, levelled and securely fixed to receive fair-faced concrete finish, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 10 | Material and labour for providing and fixing Mild Steel TMT bars Fe-500/Fe-550D, 10mm dia and above, cut to required lengths, bent to shape, including cranking, bending, spirally bending for hooping of columns, forming hooks at ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, including making of rungs, handles, etc., complete all as specified and directed by the Engineer-in-Charge. (Note: Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 11 | Material and labour for providing and fixing Mild Steel TMT bars Fe-500/Fe-550D, 5mm dia and over up to and including 10 mm dia, for stirrups, spacers, binders, etc., cut to required lengths, bent to shape, including cranking, bending, spirally bending for hooping of columns, forming hooks at ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as directed by the Engineer-in-Charge. (Note: Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 12 | Material and labour for brickwork with approved fly ash bricks, conforming to the relevant applicable IS specification, in straight or curved work on plan having mean radius exceeding 6 m, built in cement mortar 1:4, including setting out, soaking/pre-wetting of bricks as recommended, laying of bricks, proper bonding, filling and finishing of joints, scaffolding, curing and all necessary materials, labour, tools, plant and incidental operations, complete as specified and as directed by the Engineer-in-Charge. |
| 13 | Material and labour for providing and applying 15 mm thick ready-mix cement plaster on internal/external surfaces of brick walls, chajjas, fins and concrete surfaces, including preparation and cleaning of background, wetting, mixing and application of ready-mix material, levelling, finishing to an even and fair surface, curing and all necessary labour, materials, tools and plant, complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | Providing and laying 100 mm thick PCC 1:4:8 Type D-2, using 40 mm graded crushed stone aggregate, as sub-base for flooring, including preparation and compaction of subgrade, mixing, laying, compacting, levelling, finishing and curing, complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Providing and laying 100 mm thick PCC 1:3:6 Type C-2, using 40 mm graded crushed stone aggregate, as sub-base for flooring, including preparation and compaction of subgrade, mixing, laying, compacting, levelling, finishing and curing, complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Providing and laying 40 mm thick PCC 1:2:4 Type B-1, using 20 mm graded crushed stone aggregate, as sub-base for flooring, including preparation and compaction of subgrade, mixing, laying, compacting, levelling, finishing and curing, complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | Providing and laying hard core of broken bricks of gauge not exceeding 63 mm, including depositing, spreading, levelling, watering and well ramming in layers not exceeding 15 cm thick, to a true and firm surface, complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Material and labour for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, hard standing, path etc, laid in suitable panels not exceeding 3.00 m length finished even and smooth without using extra cement, 10mm Joints filled with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified. |
| 19 | Material and labour for structural steel work for roof trusses/framed trusses, purlins, crane gantries, crane rails and associated steelwork, including MS plates, bolts, nuts, washers, hollow sections, beams, angles, tees, channels, bracings, cleats, stiffeners and all necessary fastenings, including cutting, drilling, fabrication, welding, assembly, erection, fixing and alignment, complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Supply and fixing of mild steel bolts, exceeding 12 mm but not exceeding 20 mm in diameter, purpose-made with hexagonal or square head at one end and threaded at the other end, or threaded at both ends, each threaded end complete with washers and one hexagonal or square nut, exceeding 300 mm in length, including cutting, drilling, fitting and all necessary accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 21 | Supply and fixing of mild steel plates, plain or chequered, including channels, square-cut or notched plates, with ordinary or countersunk holes, without attachments, fixed by riveting, welding or using nuts and bolts, including all nuts, bolts, rivets and welding consumables, conforming to Fe-410-W (Grade E-250), Quality B, including cutting, drilling, fitting and all necessary accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 22 | Supply and fixing of mild steel works for wind ties to roof structures, including cutting, drilling, fabrication, fitting, alignment and securing with bolts, nuts, washers and all necessary accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 23 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described n exc 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete all as specified and as directed. |
| 24 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete all as specified and as directed. |
| 25 | Supply and fixing Pre-painted galvalume aluminum zinc coating mass 150AZ corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa coating mass in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.Note :- Material test certificate and authentication should be provided by the manufacturing company. |
| 26 | Supply and fixing Pre-painted galvalume aluminum zinc coating mass 150AZ plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa coating mass in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.Note :- Material test certificate and authentication should be provided by the manufacturing company. |
| 27 | Returning, filling in with approved soft/loose soil, including spreading, levelling, watering and well ramming in successive layers not exceeding 25 cm thick, including all labour, tools, plant and incidental operations, complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Spreading, levelling and dressing the material in layers not exceeding 25 cm thickness, including watering and thorough ramming/compaction of each layer to the required density, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 29 | Removing excavated material, not exceeding 50 m lead, and depositing at the place directed, at a level not exceeding 1.5 m above the starting point, including loading, handling, transportation, unloading, depositing, spreading and levelling where required, complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | Providing and laying 60 mm thick machine-pressed precast coloured interlocking concrete paver blocks, factory made, of approved shape, size, colour and pattern, conforming to IS 15658:2006, made from M-35 grade concrete, laid over and including 25 mm thick sand cushioning layer, including preparation of base, spreading and levelling of sand, laying, cutting, joint filling and mechanical compaction, complete all as specified and as directed by the Engineer-in-Charge.Note: The rate of 25mm thick layer of sand cushioning is included in this item and nothing shall be paid extra on this account. |
| 31 | Material and labour for providing and laying cement concrete of Type C-1, 1:3:6 (20 mm nominal size graded stone aggregate), including mixing, placing, compacting and finishing, as in copings, packing around interlocking paver blocks and similar works, complete in all respects as specified and directed. |
| 32 | Providing and laying at or near ground level factory-made kerb stones of any size with top bullnosed shape, made of 1:2:4 grade cement concrete, in position to required line, level, and curvature, including jointing with cement mortar 1:3 (1 cement : 3 coarse sand), forming joints not exceeding 5 mm thickness except at sharp curves, making grooves in joints where required, providing drainage openings wherever necessary, including all cutting, dressing, alignment, bedding, curing, and finishing, complete in all respects, as specified and as directed by the Engineer-in-Charge. |
| 33 | Material and labour for preparation of new or previously treated/untreated concrete surfaces of any description, not otherwise specified, over 10 cm in width or girth, including preparation of the surface and application of two coats of synthetic enamel paint in different tints, complete in all respects as specified and directed. |
| 34 | Material and Labour for Surface point wiring complete with 1.5 sq.mm nominal area PVC insulated and unsheathed multi-stranded copper conductor FRLS-H cable (ISI marked) in new PVC ISI marked heavy duty conduit for one light point/fan point controlled by one switch, including 1.5 sq.mm single-core multi-stranded FRLS-H copper earth wire connected to common earth and earth dolly, complete with M.S. sunken box (minimum 1.22 mm thick and 60 mm deep) suitable for modular base plate and top cover for mounting modular switch/socket, including all accessories, connections, testing and commissioning, complete as specified and directed by the Engineer-in-Charge. |
| 35 | All as per Item No. 34.00 here-in-before but providing one 3/5 pin socket outlet, 5 Amp, complete with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor FRLS-H cable (ISI marked) on the same board, complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | All as per Item No. 34.00 here-in-before, but providing one 5-pin, 5 Amp modular socket outlet complete with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor FRLS-H cable (ISI marked) on an independent modular board (not below the switch board), complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | All as per Item No. 34.00 here-in-before, but providing one 3/5-pin, 15 Amp modular socket outlet complete with 2.5 Sqmm PVC insulated and unsheathed multistranded copper conductor FRLS-H cable (ISI marked) on an independent modular board, complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Supplying and fixing 6 Amp, 250 Volt, one-way modular switch, one module, of approved make and type, suitable for mounting on standard modular switch box/plate, including fixing, connections, terminals, screws and all necessary accessories, complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | Supplying and fixing multipurpose modular socket outlet, 3/5-pin, 6 Amp, 250 Volt, two-module, of approved make and type, suitable for mounting on standard modular switch box/plate, including fixing, terminal connections, screws, mounting accessories and all necessary fittings, complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | Supplying and fixing 16 Amp, 250 Volt, one-way modular switch, one module, of approved make and type, suitable for mounting on standard modular switch box/plate, including fixing, terminal connections, screws, mounting accessories and all necessary fittings, complete all as specified and as directed by the Engineer-in-Charge. |
| 41 | Supplying and fixing multipurpose modular socket outlet, 2 in 1, 6 Amp, 250 Volt, two-module, of approved make and type, suitable for mounting on standard modular switch box/plate, including fixing, terminal connections, screws, mounting accessories and all necessary fittings, complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | Supplying and fixing surface-type ceiling rose, polycarbonate insulated body, two/three-terminal type, suitable for 6 Amp, 250 Volt, complete with three terminals, of approved make and type, including fixing, terminal connections, screws and all necessary accessories, complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | Supply and fixing of LED flood light, 70 W, 230 V AC, outdoor type, with efficient thermal management, multiple-optic arrangement and IP-66 protection, complete with impact- and corrosion-resistant housing, LED strips and driver, including mounting clamps and all necessary fixing accessories. The fitting shall be connected with a suitable-size three-core flexible copper conductor cable from the ceiling rose/point, including all necessary connectors, glands and accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 44 | Supply and fixing of LED light fitting, 1 × 35 W, having power factor (PF) > 0.90 and luminous efficacy not less than 100–110 lumens/W, complete with toughened glass cover, IP-66 protection, GI clamp and GI mounting bracket, including electrical connection to the light fitting with 1.5 sq.mm twin-core copper conductor as required at site, with all necessary accessories, connectors, glands, fixing hardware and complete wiring, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 45 | Supplying and fixing testing and commissioning sheet metal electrical enclosures fabricated from CRCA mild steel sheet, with IP-54 degree of protection, flush-mounted, powder-coated, complete with double metal door, suitable for housing MCBs, isolators and other electrical accessories, comprising TPN, 4-way, 230 V AC distribution board with 200 A rated copper busbar, including all necessary internal supports, terminals, glands, hardware, locks, hinges and accessories, dust- and vermin-proof, complete in all respects as specified and directed by the Engineer-in-Charge.Note : All cable/wire connections in DB's must be made using copper lugs of suitable size. |
| 46 | Providing and installing testing and commissioning12-way SPN (Single Pole and Neutral) Distribution Board, suitable for 240 Volt AC, IP-54 protected, fabricated from CRCA sheet steel of minimum 1.2 mm thickness, complete with double-door construction, powder-coated finish, suitable for mounting MCBs, 200 Amp rated copper busbar, insulated neutral link, separate earthing stud/earth link and all necessary internal supports, mounting arrangements, glands, terminals, hardware, accessories, connections and testing, complete all as specified and as directed by the Engineer-in-Charge.Note : All cable/wire connections in DB's must be made using copper lugs of suitable size. |
| 47 | Supplying and fixing double-pole RCBO, 63 Amp, 100 mA residual current sensitivity, 230 Volt AC, 50 Hz, of approved make and type, including necessary attachments and accessories, suitable for mounting in the existing distribution board, including making necessary connections, testing and commissioning, complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | Supplying and fixing double-pole RCBO, 32 Amp, 100 mA residual current sensitivity, 230 Volt AC, 50 Hz, of approved make and type, including necessary attachments and accessories, suitable for mounting in the existing distribution board, including making necessary connections, testing and commissioning, complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | Supplying and fixing single-pole MCB, 5–32 Amp, suitable for 240 Volt AC, with short-circuit breaking capacity of 10 kA, of approved make and type, necessary attachments and accessories, mounting, electrical connections, testing and commissioning, complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 50 | Supplying and fixing single-pole MCB, 5–32 Amp, suitable for 240 Volt AC, with short-circuit breaking capacity of 10 kA, of approved make and type, necessary attachments and accessories, mounting, electrical connections, testing and commissioning, complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender