Tender For Annual Plan-2025-26- Installation Of Motor For Oottupurapadi Drinking Water Project - Thiruvilawamala G.P-Project No : S0208/26-General Electrical Work
Tender Value
2.02 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
7 days left
EMD
5068
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Plan-2025-26- Installation Of Motor For Oottupurapadi Drinking Water Project - Thiruvilawamala G.P-Project No : S0208/26-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | ELECTRICAL |
| 2 | OD90006/2026-2027:Supply of 3 phase 3 HP/2.23 KW. bore well submersible pump set capable to discharge 14 to 40 LPM of clear water to a head 126-252 M. suitable to work with 415V,50HZ,A.C supply including of all taxes. Makes prefared :- Deccan EKKI - ER 41H 40 stage Or equ / Texmo / Deccan Kirloskarbrands |
| 3 | OD89995/2026-2027:Submersible pump controllers with ammeter,volt meter,SPP, for three phase 3 H.P submersible motor pumps (MU-G6 DOL ) |
| 4 | 90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors. |
| 5 | OD90012/2026-2027:Supply and providing 4 pole enclosure for independent mounding of MCB/RCCB/Isolator etc. |
| 6 | OD90011/2026-2027:S&F 40 A,4 pole RCCB 100/300 mA |
| 7 | OD90013/2026-2027:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement, of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, color washing etc. including giving necessary connections, Fuse links as required. Switch disconnector unit 32A TPN AC23 A |
| 8 | 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm |
| 9 | 90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm |
| 10 | 90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size |
| 11 | 1.17.13:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm |
| 12 | OD90010/2026-2027:supply and providing 38/40 mm outer dia CPVC pipe for delivery line |
| 13 | OD90016/2026-2027:Supply and providing adaptor suitable for 38/40 mm inner dia CPVC pipe |
| 14 | OD90015/2026-2027:Supply and providing 40 mm dia G.I pipe (B class) for delivery line |
| 15 | OD90001/2026-2027:Supply and providing 40 mm dia GI bend |
| 16 | OD90017/2026-2027:Supply and Providing 40 mm dia GI coupling |
| 17 | OD90002/2026-2027:Supply and providing 40 mm dia G.M Non Return Valve |
| 18 | OD90009/2026-2027:Supply and providing 40 mm dia GI union |
| 19 | OD89997/2026-2027:Supply and providing good quality garware make nylon marine rope 16 mm size with required PVC tie-bad ad tieing the pump set with required outside the well |
| 20 | OD90005/2026-2027:Supply and providing PVC Bore Well End Cap (160 mm) 6 inch Heavy |
| 21 | OD90003/2026-2027:Supply and providing M.S. borewell clamb with bolt and nut. |
| 22 | OD90004/2026-2027: Charges for installation of above 3 H.P, 3 phase , submersible pumpset into well after connecting the delivery pipes, and lead cables to motor and hanging the unit on poly propelyne rope in trouble free operation and conducting trail run satis factorly . |
| 23 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 24 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 25 | 90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 26 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 27 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 28 | 5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 29 | OD89999/2026-2027:Providing and fixing test joint on watering pipe, made of 2 no. strips as mentioned below of the following sizes provided on either side of the conductors with 4 nos of GI bolts, nuts check nuts and spring washers etc. complete as required.2Nos 25x6 mm G.I. strip 200 mm long |
| 30 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 31 | 90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) |
| 32 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 33 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 34 | OD90014/2026-2027:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x3mm brass nut and bolt |
| 35 | OD90007/2026-2027:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x6mm brass nut and bolt |
| 36 | OD90008/2026-2027: Supply and fixing 32A, 415 V, 2 way neutral link mounted on DMC/ SMC base in the existing meter board and giving connections etc.. |
| 37 | OD89996/2026-2027:Supply and providing 32 A HRC fuse unit with HRC fuse link i the meter box and giving connections as required |
| 38 | OD90000/2026-2027:S&F SMC Meter Box 3750 (350x481x210mm) |
| 39 | OD89998/2026-2027:Preparing completion and test certificates for KSEB connection Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender