Tender For ;Providing New Borewell And Erection Of Submersible Motor And Laying Pipe Line Works For Ward No. 43 Amman Nagar In Hosur City Municipal Corporation
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
9700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Krishnagiri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for ;Providing New Borewell And Erection Of Submersible Motor And Laying Pipe Line Works For Ward No. 43 Amman Nagar In Hosur City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Investigation of Geological survey for finding yield test |
| 2 | Drilling 150mm dia vertical Borewells in Hard rock areas to anywhere in tamilnadu Including transportation to the work site as diricted by the depetmental officers…Etc.. (Up to 150m) |
| 3 | (b) IInd depth 151m to 180 m |
| 4 | From 181m to 210m |
| 5 | FRom 211m to 240m |
| 6 | From 241m to 270m |
| 7 | From 271m to 300m |
| 8 | Supply and fixing of 150mm PVC casing pipe as per IS 12818/2010 etc, complete as per standard specification(Casing shallow depth up to 80 mtr) |
| 9 | Labour charges for inserting of 150mm Dia PVC casing pipes assembly( with slot or without slot) in the drilled hole including Jointing pipes with pvc couplers with cement paste Etc.. Complete,supply and packing the annular Space with pebbles of sixze and quality as approved by the Excutive Engineers of TWAD Board. |
| 10 | Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % Duty lpm x m (75x 275) 10 Hp |
| 11 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). 10 Hp |
| 12 | Supply of 63 Amps Porcelain fuse unit (500 V)of best quality make including cost of handling charges and all other incidental charges. |
| 13 | Supply of 63 A TPN switch disconnnector fuse units in sheet steel enclosure with HRC fuses Double break with ISI make including cost of handling charges and all other incidental charges. |
| 14 | Supply of 40 Amps 30MA RCCB/ELCB (Four Pole) switch with ISI make including cost of handling charges and all other incidental charges. |
| 15 | Supply of 10 sqmm Pvc Insulated Single Core Multi Strand Fire Reterdant Flexible Copper Cable. with ISI Mark Conforming to IS 6 Sqmm Copper wire of best quality make including cost of handling charges and all other incidental charges. |
| 16 | Supply of 3 core 6 sqmm Jointing of XLPE Insulated and Sheated 3 Core Flat Type Copper Cable Conforming to IS 694/1990 and as amended Thereafter with ISI make including cost of handling charges and all other incidental charges. |
| 17 | Supply of 4 core 16sqmm JOINTING OF L.T. CABLES- 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THEREAFTER WITH ISI MARKING with ISI make including cost of handling charges and all other incidental charges. |
| 18 | Supply of 65mm UPVC Column pipe Supreme Heavy with ISI make including cost of handling charges and all other incidental charges. |
| 19 | Supply of 2\\" GI Bend with ISI make including cost of handling charges and all other incidental charges. |
| 20 | Supply of 2\\" X 36\\" pipe nipple with ISI make including cost of handling charges and all other incidental charges. |
| 21 | Supply of 2\\" GI Flange Set with ISI make including cost of handling charges and all other incidental charges. |
| 22 | Supply of 2\\"GM Non return valve with ISI make including cost of handling charges and all other incidental charges. |
| 23 | Supply of 2\\"G I Ordinary Coller with ISI make including cost of handling charges and all other incidental charges. |
| 24 | Supplying and Delivery of the following sizes of HDPE Pipes PE-100 - PN8 conforming to IS-4984/1995, as specified to technical specifications in standard length including labour charges for loading, un-loading and staging at stock yard etc.., complete as per standard specification as directed by the Department Officers.(p.no.29) 90mm HDPE Pipe 90mm HDPE Pipe |
| 25 | Earth work excavation and deposition on the bank with an initial lead and lift of 10 meters and initial lift of 2 meters in hard stiffy clay stiff black cotton hard red earth murram, gravelly soils(SS20B) etc., complete as per std., specification. |
| 26 | Lowering the following HDPE pipes and specials into trench and laying to proper grade and alignment complete as per standard specification by deparment officers etc.., HDPE Pipe 90mm |
| 27 | Jointing the HDPE pipes and specials and testing the required pressure with water etc.., Complete as per standard specification |
| 28 | Testing of pipes for water supply with hudralic testing equipments by filling with water including cost of water @ 60/KL and testing to recommended Pressure in convenient stretches and attending the brusts if any occurred during the test excluding the cost of pipes but including other incidential and operational charges ETC... complete for the following diameteres of pipes HDPE Pipe 90mm |
| 29 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 30 | Refilling the excavated earth in to the trenches after laying the P.V.C. pipe in to the trench including cost of all labour charges and all other incidental charges etc., complete. |
| 31 | Plain Cement Concrete 1:5:10 (one part of cement, five part of Crushed Stone Sand (M- Sand) and Ten part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 32 | Supplying and fixing Solid Blocks of following size conforming to S.S. 2145-1965 (including jam Blocks closers etc..,) made in CC 1:3:6 (one Cement three sand and Six HBSJ 6 mm) in CM 1:5 (one cement and five sand) for Masonry wall partition wall including curing and finishing etc.., Complete |
| 33 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 34 | Supply and Fixing of Cudappah slab of 20 mm thick including cost of material labour charges and all other incidental charges etc., complete as per standard specification |
| 35 | Supply and Fixing of wooden board including cost of material labour charges and all other incidental charges etc., complete as per standard specification |
| 36 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 37 | Supply of 6 sqmm Pvc Insulated Single Core Multi StrandFire Reterdant Flexible Copper Cable. with ISI Mark Conforming to IS 6 Sqmm Copper wire of best quality make including cost of handling charges and all other incidental charges. |
| 38 | Supply of 2\\" dia Bore clamp, cover and water proof compound etc., complete including cost of handling charges and all other incidental charges etc, complete as per standard specification |
| 39 | Supply of 2\\" dia , SS Adapter complete including cost of handling charges and all other incidental charges etc, complete as per standard specification |
| 40 | Supply of 2\\" x 6\\" dia , pipe nipple complete including cost of handling charges and all other incidental charges etc, complete as per standard specification |
| 41 | Supply of 2\\" x 12\\" dia , pipe nipple complete including cost of handling charges and all other incidental charges etc, complete as per standard specification |
| 42 | Supplying and Delivery of the following sizes of HDPE Pipes PE-100 - PN8 conforming to IS-4984/1995, as specified to technical specifications in standard length including labour charges for loading, un-loading and staging at stock yard etc.., complete as per standard specification as directed by the Department Officers. 90 mm HDPE stup bend |
| 43 | 90 mm HDPE Elbow |
| 44 | 90 mm HDPE Flange set |
| 45 | 110 mm HDPE stup bend |
| 46 | 110 mm HDPE Flange set |
| 47 | 110 mm HDPE Elbow |
| 48 | 110 mm HDPE Tee |
| 49 | 110 x 90 mm HDPE Reducer |
| 50 | 90 mm PVC Ball Valve |
| 51 | 90 mm HDPE Tee |
| 52 | 90 x 75 mm HDPE Reducer |
| 53 | 2\\" x 3\\" HDPE Reducer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender