Tender For Day To Day Repair And Maintenance Of Civil Works At Rtu Kota. (A.M.R.C.)
Tender Value
76 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
10 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Repair And Maintenance Of Civil Works At Rtu Kota. (A.M.R.C.)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed : All kinds of soil |
| 2 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed : Ordinary rock |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. |
| 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 5 | M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 6 | M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). |
| 7 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M15 grade Nominal Mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 8 | Providing, hoisting and fixing up to floor five level precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia Mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand ) etc complete as per approved design excluding plastering of jambs, sills and soffits. : 40 mm thick |
| 9 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 10 | Add extra for Square or Rectangular Pillars in Superstructre brick work up to five storey : Upto 45 cm length and all sides are free |
| 11 | Half brick masonry in Superstructure, above plinth level upto floor V level using bricks of designation 75 : Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 12 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:4 ( 1-Cement : 4-Sand). |
| 13 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : Cement Mortar 1:4 ( 1-Cement : 4-Sand). |
| 14 | Supplying and Fixing in Walls Machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : |
| 15 | Sand or other approved stone 50mm thick |
| 16 | Kota Stone minimum 30mm thick |
| 17 | Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:4 ( 1cement : 4 coarse sand) with joints finished flush. Red Sand stone size not less than 1350 Cm2 |
| 18 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 : |
| 19 | Upto 15 cm. thick. |
| 20 | Above 15 cm. thick. |
| 21 | Providing and Fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Slabs (15-18mm thick) |
| 22 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work Full Edge moulding |
| 23 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 24 | Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. |
| 25 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 26 | Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. |
| 27 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Size 600mm x 600mm (thickness 7mm to 8mm) |
| 28 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick. Wood panel grade-I, Shesham wood grade-I, SS wire gauge 14 mesh x 24 gauge |
| 29 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 30 | Providing and fixing Almirah lock (50 to 70 mm size) of approved make without pair of handles for door with necessary screws etc complete as per direction of Engineer-in-charge. |
| 31 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick. Commercial Veneer both side |
| 32 | Extra for cutting rebate in flush door shutters for making double leaf shutter (Total area of the shutter to be measured). |
| 33 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) |
| 34 | Providing and fixing expandable fastners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/R.C.C. and making good etc. complete |
| 35 | 32 mm long |
| 36 | 50 mm long |
| 37 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete |
| 38 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint |
| 39 | Add extra for double leaf shutters. |
| 40 | Providing & fixing ball bearing for rolling shutters |
| 41 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] |
| 42 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 43 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 44 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 25 mmx 25 mm x 2.1 mm |
| 45 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 46 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 47 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand). For area of each slab from 2001 to 5000 Sq.Cm |
| 48 | Random rubble dry stone Kharanja under floor |
| 49 | Rough Chisel dressed Sand stone 35 mm thick flooring of approved shade set over 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointing with cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects : Red sand stone (Karauli stone) |
| 50 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : |
| 51 | 25 mm thick. |
| 52 | 20 mm thick. |
| 53 | 12 mm thick. |
| 54 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 55 | Finishing with neat cement (punning). |
| 56 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing). |
| 57 | Applying priming coat : |
| 58 | With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. |
| 59 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 60 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: |
| 61 | Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 62 | Old work (One or more coats) |
| 63 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 64 | Two or more coats on new work |
| 65 | One or more coats on old work. |
| 66 | French sprit polishing : |
| 67 | Two or more coats on new work including a coat of wood filler. |
| 68 | One or more coats on old work. |
| 69 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision |
| 70 | New Work |
| 71 | Old Work |
| 72 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. |
| 73 | New Plastered Surface (three or more coats) |
| 74 | Old Plastered Surface (two or more coats) |
| 75 | Making the opening in masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/windows/clerestory windows |
| 76 | Renewing glass panes,with putty and nails wherever necessary |
| 77 | Float glass panes of thickness 4 mm |
| 78 | Float glass panes of thickness 5.0 mm |
| 79 | Making holes in stone masonry wall upto 450 mm x 450 mm size and making good in CM 1:6. |
| 80 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 (1 cement : 4 coarse sand) |
| 81 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete. |
| 82 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. |
| 83 | Repair of rolling shutter with using any material such as bend repair, tightening of spring, bolt and screw etc complete. |
| 84 | Repair to damaged RCC slabs, beams and columns etc. for strengthening with cement mortar 1 : 2 in following steps : |
| 85 | (a) Choping loose and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering, cleaning of concrete surface with water as necessary and getting dried.(b) Applying Epoxy primer on the exposed steel bars.(c) Applying Epoxy hardener and resin mix (as per manufactured specification) on concrete and steel bars with brush.(d) Spreading dry cement mortar 1:2 mix over epoxy treated wet surface and allow it to dry for one day.(e) Plastering the surface with cement sand mortar 1:3 upto depth of 30mm complete.(f) Cure the plastered surface for 15 days, all work including scaffolding etc. complete in all respect. |
| 86 | Providing and Fixing Chiken wire mesh at the joint of masonry members/ R.C.C. Members with Nails complete in all respect. |
| 87 | Provideing & Fixing Chiken Wire mess at the joint of masonary member /RCC member with nails in all respect. Use welded mess 25x25x2.1 in place of Chiken mess. |
| 88 | Repair of door, window shutters including cost of material and labour for change of damaged : |
| 89 | Style / rail of teak wood 30mm thick/ Aluminium Section 4\\"wide |
| 90 | 6\\" wide |
| 91 | Panel by : |
| 92 | Shuttering Ply - 9mm thick (Commercial) |
| 93 | Wire Gauge 14 mesh x 24 gauge |
| 94 | Plain Glass Panes 4mm thick |
| 95 | Aldrop of mild Steel : |
| 96 | 12\\" long x 12mm dia |
| 97 | 8\\" long x 10mm dia |
| 98 | Stopper of Aluminium with : |
| 99 | Single Rubber Gutka |
| 100 | Double Rubber Gutka |
| 101 | Steel Hinges : |
| 102 | For Wooden Chowkhat 3\\" size. |
| 103 | For Wooden Chowkhat 4\\" size |
| 104 | Mild Steel Tower Bolt 6\\" long |
| 105 | Steel Handle 6\\" size |
| 106 | Demolishing cement concrete manually/ by mechanical means including disposal of MATERIAL within 50 metres lead as per direction of Engineer-in-charge. 1:3:6 or richer mix. |
| 107 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable MATERIAL within 50 metres lead as per direction of Engineer-in-charge. |
| 108 | Demolishing brick work manually/ by mechanical means including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. |
| 109 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50 metres lead as per direction of Engineer-in-charge : In cement mortar. |
| 110 | Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead : Of area 3 square meter and below. |
| 111 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 112 | Dismantling roofing including ridges, hips, valleys and rafters etc. and stacking the within 50 meter lead of |
| 113 | G.I. Sheet. |
| 114 | Asbestos Sheet. |
| 115 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: |
| 116 | For thickness of tiles 10mm to 25mm. |
| 117 | For thickness of tiles 25mm to 40mm. |
| 118 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 119 | Making of hole (width up to 150 mm) in R.C.C. slab/wall/beams by power driven drilling machine complete as per direction of EI |
| 120 | upto 150mm thick |
| 121 | above 150 mm thick |
| 122 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge. bituminous road (average thickness 300 mm) |
| 123 | Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification. 50mm thick. |
| 124 | Interlocking Paver Blocks having 80 mm thickness in M-40 grade concrete P&L 80 mm thick cement concrete blocks of M-40 Grade (Manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis & rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. Manufactured with steel moulds (Milled & manufactured in CSI diamond or CSI Nitro process for accuracy) on steel base plate of min 16 mm thick; Having Vibration & pressing action both together with the help of multiple synchronised vibrators. Power of hydraulic station should be min. 50KW for compaction & cured in controlled chambers having humidity control & automated air circulation system) spreading 25mm thick sand underneath & filling joints with sand on existing WBM base, as per IS 15658:2006 & all materials shall conform to MoRTH Specification Clause 602. |
| 125 | Providing and Fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm |
| 126 | Cleaning of sewer line of various sizes as per requirement at site of different sizes including 100mm, 150mm & 225mm dia of Stoneware pipe as per direction of Engineer-in-Charge. |
| 127 | Oxidised M.S. casement stay (straight peg type) 300 mm not less than 0.33 kg |
| 128 | Providing & Fixing Commercial Ply as per IS 710 : 1976 BWR of approved make for making wardrobe/shelves and other furniture with fevicol & nails complete as per approved by engineer in charge. 18 mm thick |
| 129 | Add : GST 18% on Total Work Amount Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender