Tender For Construction Of Office Buildiing For Municipal Corporation Panchkula At Plot No. Ip-3, Sector-3, Panchkula Under Cm Announcement Code No. 19916 Dated: 01.08.2017
Tender Value
17.68 Crore
Estimated cost
Bid Submission
07 Sep 2026
7 days left
EMD
35.37 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Buildiing For Municipal Corporation Panchkula At Plot No. Ip-3, Sector-3, Panchkula Under Cm Announcement Code No. 19916 Dated: 01.08.2017
BOQ
| Sl. No. | Item Description |
| 1 | False ceiling:Providing and fixing suspended false ceiling-Knauf Danoline : Acoustic Designpanel Tangent : 14mm Oval perforated, are furnished with a white absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887), which includes providing and fixing GI perimeter channels of size 0.50 mm. Thk. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to brick wall/ partition with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thk with two flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x 10mm x 0.50mm thk fixed to soffit with GI cleat and steel expansion fasteners . Ceiling section of 0.50 mm thk fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the intermediate channel with centers of 333 mm perforated gypboard is then screw fixed to ceiling section with 25 mm dry wall screws at 300 mm centers. Screw fixing is done mechanically either with driver screw or drilling machine with suitable attachment... Accoustic gypboards should have active air purification \\"Cleaneo Technology\\". Fire Class A2-s1,d0 Finally the boards are to be joined and finished so as to have a flush look with uniflot. The false ceiling surfaces shall be prepared to the satisfaction of the Architect, and painted Extra with two coats of paint to the satisfaction of Engineer incharge . |
| 2 | Providing of 450mmX450mm Access Panel Moisture Resistant Gypsum Board Access Panel with Powder coated Aluminium framing & stiffners, push-catch closing mechanism with door retaining safety cable and hook, concealed locking arrangement. Trap door frame having Knauf Danoline embossed marking. {Fixing Details - Single layer of 12.5 mm tapered edge frame is then screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centers. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. The work shall also include jointing and fixing to a flush finish of tapered edges of Gypsum board with recommended filler, paper tapes and two coats of putty/primer suitable for gypsum board to achieve a smooth finish as per manufacture's specifications. Make-Knauf Danoline or equivalent . |
| 3 | Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge.(The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Lalit pur stone |
| 4 | Providing and fixing structural steel frame (for dry cladding with 30 mmthick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube of size 2\\"x2\\" and 2mm thick in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). |
| 5 | Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. |
| 6 | Supply & Installation of Fully Automatic Sliding door operator , compliant with future European standards and produced according to the guidelines for power-operated windows, doors and gates BGR 232, the UVV and the VDE regulations. TÜV design tested, tested according to the low voltage guidelines, production according to ISO 9001:2000 certification. Fulfils the DIN V18650 (prEN 12650). Automatic Sliding Door Operator should have mounting backplate for easy installation and a flexible track profile for improved noise & vibration dampening and easy maintenance. Microprocessor-controlled control unit. Self-learning, with adjustable parameters for opening and closing speed, hold-open time and opening and closing force. Class of protection IP 20. DORMA ES200 EASY 4150mm Operators are of very sturdy design with Self balancing Panel suspension system and with Anti-Jump fitting with clear passage width of 2000 mm SD ( Two shutters of equal width) and clear height of 2400 mm .Door Panel weight max 2x100 kg. With the following accessories Function programs: Program Modes: - Off, Automatic, Permanent open, Exit only, Partial open. Emergency off – Connection for Emergency Off Button, On activation Operator will Open Fully and Stop all functions, enabling passenger to pass through in case of Panic. Safety devices:Inbuilt Obstruction detection feature with automatic reversing cycle on obstruction, dynamic and static force limitation, emergency control unit (emergency stop), Safety PhotoCells: 1/ 2 Pair of PhotoCells are provided for safety of passenger standing in line of motion of Moving Panel and for through-passage monitoring Connection: 230 V, 50/60 Hz, UPS Supply. Locking: Electro-mechanical locking, Bistable. UPS of 750 VA shall be provided by others, which will give power backup of 20 min. only & if the duration of power cut to the operator is more than 30 min., then separate arrangement for the same as Automatic Operator require un-interpreted stabilized power supply. |
| 7 | FIRE DOOR Supply of 46 mm thick steel door shutter of 60/120 min fire rated confirming to BS-476, Part-22 and IS:3614 part-II ; fabricated with 2 nos of 1mm thick glavanized steel sheet sandwiching honeycomb materials in between.Door frame are manufactured with 1.25mm thick galvanized steel sheet pressed to form double rebate profile of size 143X57 mm. The frame and shutter are finished with b. paint of approved colour ( normal brush finish) Make Agni Suraksha or Equivalent |
| 8 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (including the cost of Door, Handle, Lcok and stopper) (Quantity as per Annexure 'X') |
| 9 | [Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete. ] [66 mm overall thickness Partition with 8 mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm.] |
| 10 | Fixed glass full height partition with 45mm Frame Clip Profile, Fixed frame cleat 50x50x3mm,OHP Profile, with complete assembly, H\\" type Alu Profile, L=3000mm for 12mm Glass, 90°CONNE.PROF 3 m EV1, Junction Prof Frame 3Mtr with complete assembly, Alexa 45 - End Profile, Complet Assembly with 12mm plain toughened glass and installation.Make-Dorma or equivalent as per approval. |
| 11 | Structural Glazing Providing & Fixing DOUBLE GLAZING consisting of but not limited to 5mm toughened Outer glass of shade Enhance Coral or equivalent +12mm air gap duly filled with argon gas +5mm thick clear toughened glass duly filled with silicon sealent 789 grade ) the outer glass shall have u value = 2.8,solar factor= 35,light transmission =39% including powdercoated aluminium frame work of 75x75mm of 2mm thickness .Detailed out in the technical specifications to the complete satisfaction of the engineer incharge Make ECOSENSE AIS or equivalent as per approval.The glazing system should include openable tophung openable glass panels of 5mm thick outer glass as per architectural drawings. |
| 12 | Providing of 15 to 18mm thick Granite/ any colour and shape as per approved shade. Having basic rate not less than Rs.150/sqft . Difference in rate at time of execution shall be deducted or paid for.complete in all respect. |
| 13 | Providing Design, Detailed Engineering, Fabrication, Supply, Erection and Installation of Entrance Archi-Tectonic Sheet Structure The work shall include Primary Steel Structure Work in Jindal Mild Steel built up tubular SHS / CHS / RHS Section including cutting, hoisting, welding, fixing in position. Applying a Two Coat of Duco Paint over one coat of Anti Oxide Duco Primer after Rust Cleaning Process.Color as per choice of the architect. Providing Design and Fixing imported tensile fabric of weight not less than 650 GSM Fabric, Make Architectonic Belgium .This Should also include cutting, welding and cables, Plates and necessary hardware for fixing the fabric as approved shape as per drawing, Membrane shall be cut and manufactured with High frequency PVC Welding Machine. 15 Year Sheet Warranty Size : 10 M X 5 M X 1 Nos |
| 14 | Providing, fabrication and fixing of skylight comprising of pyramid/ vaulted shaped structure as per design, drawings, consist the following:- 6” x 6”, 2” x 2” ms pipes, ms gutter, aluminium profile section, aluminium angle, neoprene rubber gaskets, silicon sealant, steel screw, transportation, grinding and primer/painting of steel structure, labour charges, complete in all respect as per your drawing including 10mm thick clear/bronze /metalic grey multiwall polycarbonate sheet. The work shall include but not be limited to all the above procedures, materials and metholodgies and shall be completed in all respect, so as to be completely functional to the best satisfaction of Engineer-in-Charge. Cut out area. |
| 15 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, Polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners ,stainless steel bolts etc of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 16 | Providing & fixing interlocking HDPE grass paver blocks.The work shall include laying of the paver blocks of 50mm sand layer including ramming,consolidation .Complete in all respect as per drawing and specification to the best satisfaction of the engineer incharge . (N.S) |
| 17 | Providing & fixing Glass fiber reinforced concrete (GRC) lattice screen with powder spray concrete mix including Enamel Painted MS Frame work as per drawing fixed to ground with hold fasts in a concrete bed of M20.Complete in all respect as per design and specification to the complete satisfaction of the engineer incharge. |
| 18 | Providing and fixing Laminate Wooden flooring AC-4 formaldehyde emmision<.005ppm EN717-1 surface stain resistant grade-4 no visible changes to surface EN- 438-2 15, Resistant to cigarette embers -Grade-4 no visible changes to surface EN-438-218 Fire resistant ignites with difficulty at least Cfl-s1 height differences between connected element avg.<=.10mm max <=0.15mm EN13329 The work shall include but not be limited to all the above procedures, materials and metholodgies and shall be completed in all respect, so as to be completely functional to the best satisfaction of Engineer-in-Charge. |
| 19 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.shaft door and mumty door c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in S 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual omponents for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 20 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). |
| 21 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 22 | PROVIDING AND LAYING VITRIFIED OUTDOOR PAVING TILE OF SIZE 300X300 MM PAVIT MAKE inclusive but not limited to provision of all hardware , Material and labour required for the complete work to the satisfaction of the Architect/ Engineer in charge . . MAKE-PAVIT,RESTILE OR EQUIVALENT BRAND |
| 23 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 24 | Waterproofing Treatment to Podium Slab (above Basement of Non Tower area and terrace garden) to receive mixed usage of Landscape, Hardscape, Planters and Vehicular Movement. Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm,which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 25 | Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per Manufactures recommendation. |
| 26 | Providing and laying protective and slope making concrete screed of average 80 mm using M20 grade concrete containing 100% virgin polypropylene with minimum thickness of 50 mm at the rain water outlet and a slope of 1:120, making wattas at the junctions of horizontal and vertical surfaces to a float finish, well compacted, curing for 7 days etc. complete. |
| 27 | Surface Drainage System (For areas to receive Landscape and Planter) .Supply and installation of Soil Filter cum surface drainage System as per manufacturers specifications. Consist of dimple raised, moulded polypropylene sheet bonded to a high strength polypropylene geotextile fabric This geotetile fabric composite allows passage of moisture through fabric while preventing fine soil from entering to drainage channel. |
| 28 | Sealing of Pipe cut outs -Supplying & sealing the Sanitary pipe inserts, provided in the floor & walls with double sided bituminuos tape and supplying & grouting the gaps around the pipe inserts with 10M non shrink free flow grout. Dr.Fixit Bathseal Tape Dr.Fixit Pidigrout or equivalent. |
| 29 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge |
| 30 | Providing & Fixing 5mm thick 3'-6\\" high looking mirror fix with SS studs & screws on 6mm ply panellled surface of . The looking glass shall be duly polished, grinded with smooth edges. The work shall include but not be limited to all the above procdure materials and metholodgies and shall be completed in all respect, so as to the best satisfaction of Engineer-in-Charge. |
| 31 | Providing & fixing 700mm wide Hor. Shading fins consisting of M.S. pipe 75x150mm covered with aluminum composite panel 4mm thick on both side as per drawing complete fixed at site. The work shall include but not be limited to all the above procdure materials and metholodgies and shall be completed in all respect, so as to the best satisfaction of Engineer-in-Charge |
| 32 | PVC insulated Copper FRLS Wiring in 1.5 Sq mm along with green earth wire of same size PVC insulated in existing recessed heavy guage conduit 1.6 m thick conduit pipe. Short Point |
| 33 | Medium Point |
| 34 | Long Point |
| 35 | 3 pin 5 amp. Plug point including earthing the 3rdpin etc. Short Point |
| 36 | Medium Point |
| 37 | Long Point |
| 38 | 3. pin 15 A amp. Plug point with 4 Sq mm PVC insulated copper conductor cable including earthing the 3rd pin etc. Short Point |
| 39 | Medium Point |
| 40 | Long Point |
| 41 | Supply and erection of FRLS PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm |
| 42 | Size 2.5 sqmm |
| 43 | Size 4 sqmm |
| 44 | Sizee 6 sqmm |
| 45 | Size 10 sqmm |
| 46 | Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.: 600 mm width X 50 mm depth X 2.0 mm thickness |
| 47 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core XLPE aluminium conductor cable of 11KV grade as required.: 120Sq.mm |
| 48 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (Copper lugs for copper Cables) 4C X 6 sq.mm. A2XFY, Aluminium,Armoured |
| 49 | 4C X 10 sq.mm. (25mm) |
| 50 | 4C X 16 sq.mm. (28mm) |
| 51 | 4C X 25 sq.mm. (28mm) |
| 52 | 3.5C X 50 sq.mm. (32mm) |
| 53 | 3.5C X 95 sq.mm. (45mm) |
| 54 | 3.5C X 150 sq.mm. (50mm) |
| 55 | 3.5C X 240 sq.mm. (62mm) |
| 56 | 3.5C X 300 sq.mm. (70mm) |
| 57 | Supply of Lightning Protection system working on piezoelectronic technology Complying NFC 17102 Standard 79 mtr radius covering area Down mast of GI 40 mm dia and 5 mtr length with polymer insulator placed between lightning air terminal and down mast and base plate for mounting the terminal & adaptor to mount the Air Terminal etc.Down Conductor:1 Core x 70 sq mm , multistranded copper conductors Flexible cable specialy designed for lightning protecction with suitable lugs & washersLightning Counter:6 digit lightning counter counting the number of lightning strikes without any power supply in IP 65 Enclosure .Current sensitivity- 1 kA to 200 KaTest Link Joint Kit in a IP 65 weather proof enclosure of suitable dimension lightning arrestor complete as required |
| 58 | Supply, installation, testing & commissioning of cubicle type LT Panel compartmentalized floor mounted free standing with separation system as per IS:8623 part 1 for 415V, 50HZ, 3phase 4 wire AC supply, moisture, dust and vermin proof IP-42, L.T.Panel boards, made out from 2mm thick CRCA sheet steel duly epoxy powder coated (by seven tank process ) in approved colour, complete with interconnections / control/ power wiring with FRLSH copper conductor wires & 2A SP MCBs for control circuits ,communicable meters shall be with software, high conductivity Aluminium bus bars, earth bus,Bus bar supports, removable 3mm thick gland plates on top & bottom, M.V. danger notice plate , louvers and following incomer and outgoing feeders (outgoings will be with ON indication with 2A control MCB) complete as per specifications and drawings :NOTE:- All panel shall be BMS compatiable complete in all respect as required.Main LT PANELINCOMER:Transformer Incomer : One (1) Nos. 630 KVA Transformer incomer consisting of:1000A, FP EDO type ACB (50 KA) with microprocessor based O/L, S/C and E/F releases.Metering, Indication & Protection: (1 Set)Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA THD parameter) analyser with RS-485 Port.1 Set of 2000/5A, CL-1, 15VA measuring CTs.1 Set of phase indicating lamps with Fuse.1 Set of ON/OFF/Trip/Trip circuit healthy/ready to close lamps. 2000/5A, CL-1, 10VA CT for APFCR.1 Set of restricted earth fault relay with 2000/5A, CL-PS, CTsVoltage Transformer 415/110V AC, 100VA with control MCBs.Protection RelayOne (1) No. Automatic Power Factor Correction Relay with necessary CTs. Under voltage relay (27)Over voltage relay(59)Trip circuit supervision relay(95)Master trip lockout relay(86)Instantaneous Overcurrent(50)Instantaneous Earth Current(50N)AC Inverse Time Earth Overcurrent Relay(51N)Ground Detector Relay(64)DG Incomer : One (1) No. of 1000A, FP EDO type ACB (50kA) with microprocessor based O/L, S/C and E/F releases & each consist of :One (1) No. of 200A, MCCB type ACB (50kA) with microprocessor based O/L, S/C and E/F releases & each consist of :Metering and Indication: (2 Set)Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA THD parameter) analyser with RS-485 Port.Set of ON/OFF/Trip/Trip Circuit healthy/ready to close lamp.1 Set of 3 phase indicating lamp with MCB.Protection RelayUnder voltage relay (27)Over voltage relay(59)Trip circuit supervision relay(95)Master trip lockout relay(86)Instantaneous Overcurrent(50)Instantaneous Earth Current(50N)AC Inverse Time Earth Overcurrent Relay(51N)Ground Detector Relay(64)Reverse Power Relay(32)Bus Bar:One (1) No. of 1250A, TPN Al. Bus Bar of suitable length (Neutral shall be fully rated).Bus Coupler:- 200AMP MCCBOUTGOINGSFive (5) Nos. 400A, FP MCCB (35 KA) microprocessor based including Multifunction Meter and ON/OFF Lamps.Two (2) Nos. 315A, FP MCCB (35 KA) microprocessor based including Multifunction Meter and ON/OFF Lamps.Five (5) Nos. 100A, FP MCCB (25 KA) thermal magnetic including Multifunction Meter and ON/OFF Lamps.Eleven (11) Nos. 63A, FP MCCB (25 KA)thermal magneticbased including Multifunction Meter and ON/OFF Lamps.Three (3) Nos. 40A, FP MCCB (25 KA) thermal magnetic based including Multifunction Meter and ON/OFF Lamps. |
| 59 | APFC PANEL (250 KVAR)INCOMER:400 A 4 pole 35kA MCCB with in built microprocessor release ( O/L, S/C &E/F), extended rotary handle mechanism, 3N0s. CTs,& communication port & software, selector switch, control MCBs. 3- Nos. Phase & ON-OFF indicating LED lights with control MCBs - 2SetBUS BAR -630A, 415V three Phase 4 wire, four equal ratting colour coded, non-adhesive PVC insulated electrolytic 'Al' conductor bus barsOUTGOINGS:100 A 4 pole 25kA MCCB with in built microprocessor release ( O/L, S/C &E/F), extended rotary handle mechanism, 3N0s.125A CTs,& communication port & software, selector switch, control MCBs. 3- Nos. Phase & ON-OFF indicating LED lights with control MCBs -5Set63A,TP MCB, 10 kA 'C' curve protection release, ON LED indicating light with control MCB -1Set25A,TP MCB, 10 kA 'C' curve protectionrelease, ON LED indicating light with control MCB -2SetP & F of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current , conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank.7 to 10 KVAR (2SET)21 to 30 KVAR(1SET)50 KVAR (4SET)Microprocessor based three phase sensing power factor correction relay having following sensing capacity secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR, metering facility as required.8 to 10 stagesensitivity up to 50 milli Amp (1No.)Ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947- 4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required.3 pole Power contactors with following AC 3 Rating13 to 25 Amp (2set)63 Amp. (1set)100 Amp (5Set)push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required.Luminous type Red , Yellow, Green, Amber (30set) |
| 60 | EXTERNAL LIGHTING Feeder PillarINCOMER:40A, FP MCB, 10 kA 'C' curve protection release, ON LED indicating light with control MCB -1SetBUS BAR -40A, 415V three Phase 4 wire, four equal ratting colour coded, non-adhesive PVC insulated electrolytic 'Al' conductor bus barsOUTGOINGS16 A, FP MCB, 10 kA 'C' curve protectionrelease, ON LED indicating light with control MCB - 8Set |
| 61 | GROUND FLOOR PANELIncoming:One (1) No.100A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch.One (1) No. (0-100A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:150A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves.Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Two (2) Nos. of 40A,TPN MCCB Six (6) Nos. of 63A,TPN MCB Nine (9) Nos. of 32A,TPN MCB Ground Floor Panel as described above |
| 62 | FIRST FLOOR PANELIncoming:One (1) No.100A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch. One (1) No. (0-100A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:150A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves.Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Six (6) Nos. of 63A,TPN MCBNine (9) Nos. of 32A,TPN MCBFirst Floor Panel as described above |
| 63 | SECOND FLOOR PANELIncoming:One (1) No.63A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch.One (1) No. (0-63A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:100A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves. Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Five (5) Nos. of 63A,TPN MCB Six (6) Nos. of 32A,TPN MCB Second Floor Panel as described above |
| 64 | THIRD FLOOR PANELIncoming:One (1) No.63A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch.One (1) No. (0-63A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:100A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves.Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Five (5) Nos. of 63A,TPN MCB Six (6) Nos. of 32A,TPN MCBThird Floor Panel as described above |
| 65 | FOURTH & TERRACE FLOOR PANELIncoming:One (1) No.63A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch. One (1) No. (0-63A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:100A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves.Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Three (3) Nos. of 63A,TPN MCB Two (2) Nos. of 40A,TPN MCB Four (4) Nos. of 32A,TPN MCB Two (2) Nos. of 40A,DP MCBFourth & Terrace Floor Panel as described above |
| 66 | BASEMENT VENTILATION PANELIncoming:One (1) No.160A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch.One (1) No. (0-160A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:200A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves. Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Three (3) Nos. of 63A,TPN MCB Six (6) Nos. of 32A,TPN MCB Twenty One (21) Nos. of 25A,TPN MCB Basement Ventilation Panel as described above |
| 67 | PRESSURIZATION PANELIncoming:One (1) No.63A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch. One (1) No. (0-63A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:100A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves. Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Five (5) Nos. of 25A,TPN MCB Pressurization Panel as described above |
| 68 | AC PLANT ROOM PANELIncoming:One (1) No.160A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch. One (1) No. (0-160A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:200A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves.Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Seven (7) Nos. of 40A,TPN MCB Seven (7) Nos. of 32A,TPN MCB Two (2) Nos. of 25A,TPN MCB AC Plant Room Panel as described above |
| 69 | UPS INPUT PANELIncoming:Two (2) Nos.100A TPN MCCB (25KA) .Metering, Indication & ProtectionOne (1) No. (0-500 volts) voltmeter with 3 way 'ON' and 'OFF' selector switch. One (1) No. (0-160A) ammeter with ammeter selector switch and required CTs.Phase indication lamps each backed up with 2 AMPS MCB.Bus Bars:160A, TPN aluminium bus bars suitable for 415V, 50Hz with colour coded sleeves. Outgoing:ON/OFF & phase indication lamps on each outgoing to be provided.Four (4) Nos. of 63A,TPN MCBThree (3) Nos. of 40A,TPN MCB Four (4) Nos. of 40A,DP MCB Six (6) Nos. of 32A,DP MCB UPS Panel as described above |
| 70 | Lift Panel-1&2 (2nos lift each)One (1) No. 63A, TPN MCCB (25 KA) microprocesser basedMetering1 Set of (0-500 Volt) 96 x 96mm Voltmeter with MCB and 3 way selector switch.1 Set of (0-63 Amps) 96 x 96mm CT operated Ammeter with 3 way selector switch and 100/5A, CL-1, 10VA CT.One (1) Sets of phase indicating lamps with control MCBs and ON OFF TRIP indication.Bus Bar100A, TPN Al. Bus Bar of suitable length.OutgoingsThree (3) Nos. 63A TPN MCB (10 KA)One (1) Nos. 40A DP MCB (10 KA)Lift Panel-1&2 Panel as described above |
| 71 | Supplying installation testing and commissioning of suitable three phase DOL starter up to 5.5 kW motor rating. |
| 72 | Supplying installation testing and commissioning of suitable three phase S/D starter for 7.5 kW to 22.0 kW motor rating. |
| 73 | Supply, Installation, testing ,commissioning, Loading & unloading,at site of 11KV/433V, 630KVA Outdoor type Unitised Compact Package Substation conforming to IEC 1330 with facility for internal lighting, earthing, padlocks etc. Connection between RMU & Transformer will be by 1 no. 3C x 120 Sq.mm. XLPE cable/Busbar and Connections from Transformer to LT ACB will be by busbar connections. Cable Termination kits for RMU etc. (Within GI sheet enclosure). The transformer should have OLTC and RTCC panel inbuilt tap changing should be for -15% to +5% in 1.25% range. |
| 74 | SITC of following ratings Sound Attenuated DG sets comprising of CUMMINS make engine coupled to 415 Phase Stamford make alternator mounted on a common Base frame along with other accessories i.e. Fuel tank, Batteries with leads 650 KVA DG SET |
| 75 | SITC of following ratings Sound Attenuated DG sets comprising of CUMMINS make engine coupled to 415 Phase Stamford make alternator mounted on a common Base frame along with other accessories i.e. Fuel tank, Batteries with leads 140 KVA DG SET |
| 76 | Supply installation testing and commissioning of floor mount type true on line doubale conversion 40kVA 3-Phase IN and 3-Phase out UPS sytem, suitable for MOD Bus connectivity, SMF battries to provide back up (for 15 minutes) on full load including MS painted rack for housing the above said batteries along with all accessories including interconnecting cables, lugs & battery circuit breaker complete as required. |
| 77 | SITC Of Led zigbee enabled wireless communicating Recess mounted luminaire downlighter with a nominal system lumen output of 1200 lumens and a minimum system efficacy of 100 lm/W. Luminaire wattage should not exceed 12W. The luminaire should have a color temperature of 6500K and CRI>80. Driver of the luminaire shall have THD<20% and PF >0.9 and and should be dimmable. The luminaire shall be compatiable with daylight harvesting and PIR compatible sensor which has the coverage area of 3.6m x 5.4m at mounting height of 3m. The luminaire optics shall have a high efficiency diffuser with more than 85% transmittance -DN296B LED12S-6500 PSD WH wireless/zigbee enabled luminaire |
| 78 | SITC Led zigbee enabled wireless communicating Recess mounted luminaire downlighter with a nominal system lumen output of 1600 lumens and a minimum system efficacy of 100 lm/W. Luminaire wattage should not exceed 16W. The luminaire should have a color temperature of 6500K and CRI>80. Driver of the luminaire shall have THD<20% and PF >0.9 and and should be dimmable. The luminaire shall be compatiable with daylight harvesting and PIR compatible sensor which has the coverage area of 3.6m x 5.4m at mounting height of 3m. The luminaire optics shall have a high efficiency diffuser with more than 85% transmittance.Equivalent to Philips :DN296B LED15S-6500 PSD WH wireless/zigbee enabled luminaire |
| 79 | SITC of Led zigbee enabled wireless communicating Recess mounted luminaire (2x2), with a nomial system lumen output of 3000 lumens and a minimum system efficacy of 120 lm/W. Luminaire Wattage should not exceed 25W. The luminaire should have a color temperature of 6500K and CRI>80. Driver of the luminaire shall have THD<10% and PF >0.9 and should be dimmable. The luminaire shall be integrated with daylight harvesting and PIR compatible sensor which has the coverage area of 3.6m x 5.4m at mounting height of 3m. The luminaire housing should be made of powder coated metallic CRCA with high efficiency opal diffuser.Equivalent to Philips: RC380B LED30S-6500 G4 L60 W60 OD IOA |
| 80 | SITC of Zigbee enabled wireless communicating daylight harvesting and PIR compatible sensor which has the coverage area of 3.6m x 5.4m at mounting height of 3m. The sensor should be able operate with SR drivers and qualified wireless switches.It should support IPv6, TCP, UDP ethernet protocols.Equivalent to Philips SNS400 |
| 81 | SITC of Zigbee enabled wireless communicating SR bridge .Equivalent to Philips SR Bridge |
| 82 | SITC Lighting control system control gateway unit with required accessoories like hard wares /softwares as required as per ther site conditions.The gateways should connect to average if 150 ZigBee nodes and is powered by a 5 Vdc Class 2/SELV power adapter.Wireless communication complies with the ZigBee Pro standard (IEEE 802.15.4, WPAN) in the 2.4 GHz frequency band..It should support IPv6, TCP, UDP ethernet protocols.Equivalent to Philips LCN1850/05 Wireless Gateway Pro |
| 83 | SITC of Lighting control system mointoring Birgde unit with required accessoories like hard wares /softwares as required as per ther site conditions.Equivalent to Philips LCN1860/05 Building Connectivity Bridge |
| 84 | SITC of ZigBee Green Power wireless switch.Indoor distance that can be covered is typically 10m. for line-ofsight installations. No wiring and power connections required so easy to install and maintenance free.The devices can be linked into for example a network formed with Zigbee mesh network.The devices are easy to install and use. One device UID8450 has switch and dim functionality and the other UID8460 has scene selection,including Off, functionality.Dimension 97×86×22 mm (8450) or 97×89×22 mm (8460) with an RF range 10m for workstation, cabins and Meeting room |
| 85 | SITC of 24 Port Cisco 891F Switch |
| 86 | SITC of Software & maintenance of intelligent lighting control system |
| 87 | SITC of Programming & commissioning of intelligent lighting control system |
| 88 | SITC of of 2x13 W LED Tube with Complete housing with sminimum system lumens of 4200lm with LED life of 40000 burning hours |
| 89 | SITC of 65W LED Street light luminaire with minimum system lumens of 6500lm and system efficacy of 100lm/W. The street light should have housing made of Pressure Die Cast aluminium.The street light should have PC secondary lens optics for better distribution of light. The voltage range of the fixture should be 140V-270V with PF>0.95 and THD<10%. The LED street light luminaire should have Potted Driver.The fixture should have low voltage and high voltage frocetion with Auto reststart.LM80,Lm79 reports to be submitted from NABL approved LAB. Philips Cat no.BRP410 LED CW 066 NR PC S1 PSU GR |
| 90 | SITC of of 70W LED Flood light luminaire with minimum system lumens of 7000lm and system efficacy of 100lm/W. The street light should have housing made of Pressure Die Cast aluminium.The street light should have PC secondary lens optics for better distribution of light. The voltage range of the fixture should be 140V-270V with PF>0.95 and THD<10%. The LED street light luminaire should have Potted Driver.The fixture should have low voltage and high voltage frocetion with Auto reststart.LM80,Lm79 reports to be submitted from NABL approved .Philips Cat no.BVP120 LED 70 CW FG S1 PSU G |
| 91 | SITC of of 2W LED Step Light with warm white colour temperature in aluminium body with whit white finish. Make Philips. |
| 92 | PHOTO VOLTAC SYSTEM : Supply, installation, testing & commissioning of Photovoltic solar system with solar photo voltic module (325Wp+/-2%), Module mounting structure, Arry junction box, main junction box, solar Cu cables, power conditioning unit with invertor, Dc and AC distribution board, earthing kit, and all accessories as required. : 30 KW System |
| 93 | Supply, Installation , Testing & commissioning of Fire Panel & Annunciators: Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete with Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. The system shall be equipped with necessary Digital Audio Amplifier capable of processing one of 8 audio channels and amplifiers as per the speakers requirement at 70.7 VRMS output along with necessary enclosures. The DAA shall be fully monitored for fault and alarm reporting. The proposed Digital Amplifiers shall not be rail mounted / dependant on Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of Amplifier operation.The Digital Amplifier Loop shall have N+1 Redundancy concept to avoid chances of failure. The Fire Fighters Telephone System shall be capable of having minimum 35 Telephones on conference. UL Listed & FM Approved.Approved Makes:Notifier / XLS-3000 / IFC, 4Loop Capacity (Expandable upto 6 loops) |
| 94 | Network Repeater Panel with minimum 600 characters LCD display & programmable QWERTY Keypad and mapping minimum 2,00,000 points on network. The NRP shall act as an independent node communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation.UL Listed & FM Approved. Approved Makes:Notifier / XLS-3000 / IFC |
| 95 | Digital Audio Amplifier capable of processing One of 8 audio channels and total of 100 W at 70.7 VRMS output along with necessary enclosures. The Digital Audio Amplifier shall be fully monitored for fault and alarm reporting. The proposed Digital Audio Amplifiers shall (be Wall/Panel Mounted) not be rail mounted / dependant on Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of Amplifier operation.UL Listed & FM Approved.Approved Makes:Notifier / XLS-3000 / IFC |
| 96 | Remote Paging Station for Zone selection & paging to selected area in case of emergency.UL Listed & FM Approved. Approved Makes:Notifier / XLS-3000 / IFC |
| 97 | Integrated 8 channel Digital Voice Evacuation System capable to supervision of all the speaker circuits, with required suitable amplifiers for following Speakers and acessories required to compelete the system. The system shall be integrated with EPBAX telephone lines/ Extensions for making announce ments using Telephone/ mobile phone. The equipment shall be of same make as panel. suitable upto 400 Speakers |
| 98 | Detectors: Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 2.5% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall adapt to its environment by utilizing a built-in microprocessor to determine its environment and choose the appropriate sensing settings for early detection and reduction in false alarm. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. UL Listed & FM Approved. |
| 99 | Multi Cooperative Sensing Analog addressable Photoelectric smoke detector with mounting based LED, Address Switch to programme the suitably, complete as required. UL Listed & FM Approved. |
| 100 | Addressable Rate of Rise Heat Detector rated at 9.4 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches.UL Listed & FM Approved. |
| 101 | Addressable Duct Smoke Detector. The duct detector shall have an air velocity rating from 100 to 4000 ft/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches.UL Listed & FM Approved. |
| 102 | Modules: Addressable type fault for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement. (Base Model). UL Listed & FM Approved. |
| 103 | Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide DPDTcontact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.UL Listed & FM Approved. |
| 104 | Addressable Telephone Module for interfacing with Telephone Jack for Fire Fighters Telephone Communication application. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.UL Listed & FM Approved. |
| 105 | Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide DPDTcontact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.UL Listed & FM Approved. |
| 106 | Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall provide DPDTcontact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.UL Listed & FM Approved. |
| 107 | Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device.UL Listed & FM Approved. |
| 108 | Notification Devices: 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Ceiling Mount Speakers. The speakers shall be of same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. |
| 109 | 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Wall Mount Speakers. The speakers shall be of same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. |
| 110 | Telephone Talkback: Addressable Fire Fighter's Telephone Jack with suitable module for two way communication between Remote Fire Fighter & Fire Command Center.UL Listed & FM Approved. |
| 111 | Fire Fighter's Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center.UL Listed & FM Approved. |
| 112 | Exit Signage: Emergency Exit Lights as per model Omniex with laser eatched translucent polyacrylic 8mm thick sheet illuminated with the hidden LED strip in Green Colour. The Unit shall be 230 V A.C. & 12 V DC operable & shall be supplied with inbuilt Battery for 30 Min backup, Battery charger complete with hanging/ Mounting arrangements. |
| 113 | Exit Signage: Response indicator (Above false ceiling). |
| 114 | Exit Signage: Response indicator (Enclosed spaces ). |
| 115 | Supply and drawing of 2 C X 1.5 Sq mm multi stranded twisted unshielded FRLS Copper cable. |
| 116 | Supply and Laying of 2 C X 1.5 Sq mm flexible Copper Conductor, Twisted unshielded FRLS Armoured cable. |
| 117 | Smart card Reader with 4 to 9 Cms read Range, 13.54 Mhz frequency, 32 bit weigand format, bicolour LED indication, card read Time 0.1 Sec. |
| 118 | 2 KB Memory printable Smart Cards |
| 119 | Supply , installation, testing and commissioning of Push Button for Exit. |
| 120 | Access Control panel with CPU shall be 32 Bit Processor should support control of 4 Doors & 8 wiegand Readers to restrict the entry of unauthorised people. The controller must support intrusion i/p, Fire Input, TCP/ IP Ethernet networking for communicating on Internet, LAN,Intranet and Port Forwarding etc., support Nested Antipass Back to restrict the unauthorised one who got access by tail getting, featured to create 16 different Authority Levels for Supervisor/Administrator/User on the device. Controller shall have integral LCD display & User Name,/code/card no should be displayed on the LCD screen along with Access granted. Controller shall support more than 50000 transactions & 30000 users, shall support Weigand (Up to 34 bit), 12 inputs & 8 outputs. Controller shall have TCP/IP,RS485 communication ports. The Access Controller shall be fully integrable with the Door Interlock System.The Controller shall be complete with the Power supply Unit with Battery charger & SMF Battery etc complete in enclosure etc.Make: Lenel / Cassirusco/ Smart -I |
| 121 | Supply, installation, testing and commissioning electromagnetic (fail safe type) Lock for the following doors: Single Leaf Door 600 lbs |
| 122 | Supply, installation, testing and commissioning electromagnetic (fail safe type) Lock for the following doors: Double Leaf Door |
| 123 | Supply, installation, testing and commissioning of door open break glass switch for individual access control door. This shall be located in a powder coated lockable enclosure housed in control room. Quoted price shall be inclusive of wires running in 25mm.dia MS conduit between door and this switch. |
| 124 | Supply, installation, testing and commissioning of master switch for opening all access control door. It shall be housed in the enclosure described in item 8. Quoted price shall be inclusive of wire in 25 mm dia 2mm thick PVC conduit between doors and switch. |
| 125 | Desktop based Modular Access Management software with SQL Database, Single GUI Plateform with complete modular software with provision to integrate with different application ie; Time Attendance, VMS, Canteen, Alarm Management, etc., It comprises with all masters, basic access control software, and basic attendance software and enrollment module., Advance access control management software module with all the access control features i.e.; Time Zone, Access Level, Anti passback, Holiday restrictions, employee black list, etc. ,Comprehensive Email and SMS module for smartACCESS to send various SMS & Email on the base of different events in Access Control system.It should support Multi company, multi location, multi department, multi login with different rights, muti hierarchy of employee, Different type of Anti passback - Hard,Soft, user wise & controller wise, Duress Authentications, Controller communication status display with indication of Green/Red button denotes device is online or offline, Central Date & time Synchronization etc. Make: Lenel / Cassirusco/ Smart -I |
| 126 | 0.75 Sq. mm X 8 cores, Flexible copper conductor PVC insulated , shielded & sheathed cable in existing Conduit. |
| 127 | 2X 1.5 Sq. mm, Copper conductor cable, PVC Insulated and overall sheated Cable in existing Conduit. |
| 128 | PC complete with CPU, Key Board, 21' LED' monitor, 600VA on line UPS with 15minute battery back up (SMF) batteries per following specifications. Intel Original Mother Board & Liscenced latest windows operating Software, Intel i-3 processor, 4GB DDR 2 RAM, 500 GB Hard Disc., DVD Writer, 21\\" LED Monitor, Multimedia Key Board, Optical Mouse |
| 129 | SITC of Connectors, interfaces, Mounting hardware, Cords, Jacks, Plugs,tags, identifiers, fixures, clamps, screws, nut - bolts etc as required for the installation and commissioning of the Systems. |
| 130 | Supply, installation, testing & comissioning of 3 MP Dome Camera, ONVIF profile S & G, UL, CE, FCC Certified, 1/2.8\\" CMOS sensor, 3.6 mm fixed focal, Min Illumination : 0.01 Lux @ (F1.2, AGC ON), 0.028 Lux @ (F2.0, AGC ON), 0 Lux with IR, Shutter Speed : 1/5 ̴ 1/100,000 s, Edge analytics : line crossing, perimeter intrusion, stationary object, Video Compression : H.265, H.264, frame rate 30 fps @ 3MP, Edge analytics : line crossing, perimeter intrusion, Face detection, cross counting, stationary object, Inbuilt IR LED, IR distance upto 30 mtrs, IP 66, POE. |
| 131 | Supply, installation, testing & comissioning of 3 MP Bullet Camera, ONVIF profile S & G, UL, CE, FCC Certified, 1/2.8\\" CMOS sensor, 2.8 to 12 mm varifocal Lens, Min Illumination : 0.05 Lux @ (F1.2, AGC ON), 0 Lux with IR, Shutter Speed : 1/5 ̴ 1/100,000 s, Video Compression : H.265, H.264, frame rate 30 fps @ 3MP, Edge analytics : line crossing, perimeter intrusion, Face detection, cross counting, stationary object, Inbuilt IR LED, IR distance upto 30 mtrs, IP 66, POE. |
| 132 | Supply, installation, testing & comissioning of 3 MP PTZ Camera, UL, CE, FCC Certified, ONVIF profiles, triple stream or more, 4.3 to 129mm focal length, 30 X Optical Zoom, 10 X digital Zoom, Frame rate : 25 fps @ 3MP, 50 fps @ 2 MP ( main stream), Shutter Speed : 1/3 - 1/10,000 s, inbuilt IR LED for night vision, triple stream or more, IR distance upto 100 mtr or more, upto 20 privacy masking , 2D / 3D noise reduction, 120 dB WDR, 360 deg endess pan, tilt -15 to 90 deg, auto flip support, 80 presets, Auto pan, SD Card support, Auto white balance, Auto iris, Alarm : 2 IN, 1 Out, IP 66 weather proof, Power : 24V AC/ POE+ / POE. |
| 133 | Supply, installation, testing & comissioning of Wall mount with cabling provision and IP 66 protection rated weatherproof Mount. |
| 134 | Supply, installation, testing & comissioning of Highly regulated Power supply Unit with appropriate VA rating, with constant terminal voltage suitable for the Speed Dome Camera. |
| 135 | 6 MP , Fish eye Camera ,ONVIF profile S & G , UL,CE,FCC certified , 1/1.8\\" CMOS lesn , 1.55 mm focal length , shutter speed :1 ~ 1/10000 sec , Quad stream , Frame rate : 6MP @ 25 fps , 2 MP @ 50 fps , Digital Zoom , Two way audio support ,Auto white balance ,Inbuilt IR LED , IR Distance upto 5 mtrs ,IP 66 weather proof , POE. |
| 136 | Supply, installation, testing & comissioning of ONVIF profile S & G, UL certified 32 Channel NVR, 8 SATA ports, each SATA capacity of upto 8 TB, Recording Bandwidth 320 Mbps, 1 X HDMI, 1 X VGA, Alarm : 16ch in / 4ch out, 1 X RJ-45 port, 1x3.0 USB for backup / upgrade, 2 x 2.0 USB for mouse, Smart Phone support : iOS, Android. |
| 137 | Supply, installation, testing & comissioning of (24/7) working VIDEO SURVELLIANCE Grade HARD DISK 6 TB. |
| 138 | Supply installation testing & comissioning of of 32\\" Full HD LED Display for Monitoring with mounting accessories. |
| 139 | Integrated CCTV Management Software. |
| 140 | Desktop Core i5, 6th Generation, 8GB RAM, 1TB HDD, Graphic Interface card ,Wliscenced indow 10, 20\\" LED Monitor, wireless keyboard & Mouse |
| 141 | Supply & laying of 3C X1.5 sq. mm Power Cable in existing Conduit. |
| 142 | Supply & laying of CAT6 Patch Cord 3 feet. |
| 143 | Supply , Installation , Testing and commissioning of 8 PORT POE layer-2 SWITCH, with SFP port including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge. |
| 144 | Supply , Installation , Testing and commissioning of 24 PORT POE layer-3 SWITCH, with SFP port including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge. |
| 145 | Supply installation testing & comissioning of SFP Module |
| 146 | Supply installation testing & comissioning of Optical Fibre Cable 50/125 Micron 6 Core Armoured Multimode including splicing etc as required. |
| 147 | Supply installation testing & comissioning of LIU-6 port fully loaded. |
| 148 | Supply installation testing & comissioning of Fibre Patch cord. |
| 149 | Supply installation testing & comissioning of Jack panel unloaded. |
| 150 | Supply installation testing & comissioning of Jack for cat 6 Cable. |
| 151 | Supply installation testing & comissioning of Faceplate with double IO slot & jack Coupler etc for cat 6 Cable complete as required. |
| 152 | Supply installation testing & comissioning of MS Equipment rack of 32 U size with front transparant acrylic facia with power supply strip for the Power for the devices to be placed, door lock and key, openable from front as required. |
| 153 | Supply installation testing & comissioning of MS Equipment rack of 6 U size with front transparant acrylic facia with power supply strip for the Power for the devices to be placed, door lock and key, openable from front as required. |
| 154 | Supply installation testing & comissioning of Connectors, interfaces, Mounting hardware,tags, identifiers, fixures, clamps, screws, nut - bolts etc as required for the installation and commissioning of the Systems. |
| 155 | Supply installation testing & comissioning of media Convertor Jack for cat 6 Cable. |
| 156 | Outdoor weather Proof IP-66 rated Junction Box for media Convertor |
| 157 | Outdoor weather Proof Splice Tray. |
| 158 | Multimode Fiber Pigtail including Splicing etc. as required |
| 159 | Supply and fixing following modular switch/socket on the existing modular plate and cover plate & switch box including connections but excluding modular plate etc. as required. : Telephone socket outlet. (RJ - 11) |
| 160 | Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc as required.: 1 or 2 Module ( 75mm X 75mm ) |
| 161 | Supply and installation of wall/recessed mounting KRONE connector type telephone tag block of following sizes in sheet metal enclosure of suitable dimensions fabricated out of 16 SWG sheet steel with castle key lock, hinged gasketed type cover including termination of telephone cables, making connections, painting of box etc, complete as required.5 Pair Tel Tag Block |
| 162 | 10 Pair Tel Tag Block |
| 163 | 20 Pair Tel Tag Block |
| 164 | 50 Pair Tel Tag Block |
| 165 | 100 Pair Tel Tag Block |
| 166 | 300 Pair Tel Tag Block |
| 167 | Supplying, and drawing following size anealed tinned copper conductor PVC insulated and sheathed 0.61sqmm armoured copper telephone cables on, surface/cable tray/ existing steel conduit as required. 100 Pair Tel Tag Block |
| 168 | 300 Pair Tel Tag Block |
| 169 | Supplying and fixing of Telephone device of approved make complete as required. |
| 170 | Supply, installation, testing and commissioning of category 6 flush mounted moduler information outlets including conection, testing etc. as required.: Two module (RJ-45) |
| 171 | Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc as required.: 1 or 2 Module ( 75mm X 75mm ) |
| 172 | Supply, Erection, Testing and commisioningof Digital SPC(Stored Programmed Control) Maximum Capacity:-8CO's 200Extensions (16 Hybrid 8:SLT) Intercom Paths:4 Dialing Method: ExternalTone (DTMF)/Pulse (10PPS,20pps) Internal Tone (DTMF)/Pulse(10PPs,20PPS) Dialing conversion :Pulse to Tone Coonections CO Line Intercom, Paging, External Music, SMDR, Programming SMDR, Detail Recording Date TIme Extension Number COLine Number, Dialled Number Call duration, Account Code, Caller ID*3 Polarity Reverse Detetction*2 Yes Voice Mail Ports (APT or DTMF) DTMF Receiver 2/8 Extension CO-CO Transfer Ports 1/CO Line card Power Failure Transfer Ports 2/Co Ports Line Card Durect COnnection to EXternal Bttery Yes Poweer Source AC 110-240V, 50/60Hz Power Consumption 45W Dimension (WxHxD) 368mmX284mmX117mm Weight (when fully expand) Approx 3.5Kg option spec. |
| 173 | Providing and fixing gun metal single headed ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet & 63 mm dia female outlet complete with PVC / rubber cap and GI chain twist release type plug and all accessories as per IS: 5290- 1993 and all amended up to date Type A including fixing with anchor fasteners and flanged tapping from ring main and complete as required. |
| 174 | Providing Non-percolating flexible hose (RRL type-'A') ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneous type SS 63 mm dia. IS marked Male and female couplings (IS:903) bound and rivetted to hose pipe with copper rivets and 1.5 mm copper wire. |
| 175 | Providing of standard size gun metal 63 mm dia branch pipe with nozzle of 20 mm nominal bore outlet as per (IS: 903- 2008 all amemded up to date) suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS: 903- 2008 all amemded up to date) complete. |
| 176 | Providing & fixing Gun-Metal Fire Brigade connection (Suction collecting head) consisting of 63 mm dia instantaneous type male coupling with built-in check valves and 150 mm dia.flanged outlet complete with bolts, nuts and rubber insertions as required as per IS:904-1983.: Four Way |
| 177 | Providing and Fixing of Gun-metal Fire Brigade Suction Hose coupling (Draw-out Connection) with nut for female coupling as per IS:902- 1974 complete with 100 mm dia. G.I. Suction pipe and 100 mm dia. 1No. C.I. Foot valve flanged (to be connected to static water tank). |
| 178 | Providing and fixing Weather proof hose cabinets fabricated from 16 g M.S. Sheet with full glass door and locking arrangement, suitable to accommodate 2 nos. 15 M long hose and 1 No branch pipe. The cabinet shall be painted with one coat of primer and finished stove enamelled \\"Fire Red\\", \\"Fire Hose\\" written on front including suitably mounted on a raised masonry platform as required.(Approx 0.75mx0.6 m x 0.25 m). |
| 179 | Providing and fixing M.S. cabinet (to enclose above. Draw-out/Fire brigade inlet connections) fabricated from 16 g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.6 m x 0.6 M x 0.250 M ). |
| 180 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING Mild Steel black pipe (IS: 3589, 6mm thick) heavy class including cutting, screwing, welding etc. complete with UL/FM listed DI fitting viz. tees elbow, bends, flanges, reducers. etc including excavation (upto 1.5M deep of suitable width). Rubble soling, sand filling upto 3 \\" above the pipe, back-filling with excavated earth, removal of surplus soil and providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS: 10221complete as required. 150 mm dia |
| 181 | 100 mm dia |
| 182 | 80 mm dia |
| 183 | Providing and Fixing slim seal Butterfly valves B190 Class (PN 16) complete with matching flanges rubber insertion, nuts. bolts and washer etc. of following sizes: 80 mm dia |
| 184 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING Mild Steel Black pipe (IS:1239 Part-1) heavy class including cutting, welding/serving etc. and providing all fittings viz. flanges. bends,Tees, Elbow, Reducers.Clamps. Hangers, necessary supporting arrangement etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same to the approval of engineer/consultant complete including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work.Note : Pipes upto and 50 mm dia shall be threaded joints, above 50mm shall be welded joints. 150 mm dia |
| 185 | 100 mm dia |
| 186 | 80 mm dia |
| 187 | Providing and fixing cast iron wafer type horizontal/ vertical non return valve complete with flanges tested to 16 Kg./m2. For 150 mm dia pipes |
| 188 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm dia (Class II) |
| 189 | Providing and fixing gun metal single headed ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet & 63 mm dia female outlet complete with PVC / rubber cap and GI chain twist release type plug and all accessories as per IS: 5290- 1993 and all amended up to date Type A including fixing with anchor fasteners and flanged tapping from wet riser/down comer and complete as required. |
| 190 | Providing Non-percolating flexible hose (RRL type-'A') ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneous type SS 63 mm dia. IS marked Male and female couplings (IS:903) bound and rivetted to hose pipe with copper rivets and 1.5 mm copper wire. |
| 191 | Providing of standard size gun metal 63 mm dia branch pipe with nozzle of 20 mm nominal bore outlet as per (IS: 903- 2008 all amemded up to date) suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS: 903- 2008 all amemded up to date) complete. |
| 192 | Providing and fixing of First-Aid Fire Hose Reel wall mounting swinging type complete with drum,bracket, 25 mm dia. Ball valve and 20 mm dia x 36.5 M long high pressure Rubber Hose Reel(Type 2) tubing as per IS:444 with Gun-Metal shut-off nozzle having 5mm dia orifice. The Hose Reel shall strictly confirming to IS:884-1985. |
| 193 | Providing and fixing MS hose door fabricated from 16 g M.S. sheet with full glass door and locking arrangement, suitable to accommodate 1 Hydrant landing valve, 1 fire hose reel, 2 nos 15m long 63mm dia hose,1-branch pipe. The door shall be painted with one coat of primer and finished stove enamelled \\"Fire Red\\", \\"Fire Hose\\" written on front as required. (Approx.size 1.2m x 2.1m) |
| 194 | Providing and Fixing slim seal Butterfly valves B190 Class (PN 16) complete with matching flanges rubber insertion, nuts. bolts and washer etc. of following sizes 80 mm dia |
| 195 | 100 mm dia |
| 196 | 150 mm dia |
| 197 | Supply, installation, testing and commissioning of 15 mm dia. Quartzoid bulb type G.M. Sprinkler head suitable to operate at 68 deg.C (UL/FM/LPC listed /approved) Standard Pendant type in Brass finish. |
| 198 | Standard upright type in Brass finish. |
| 199 | Supply, installation, testing & commissioning of UL/approved Metallic stainless steel (SS 304) braided Flexible drop pipes of 25mm dia with rosset plate and cross bar assembly support suitable for grid ceiling, reducing fitting, special shoulder Nipple, redcing nipple, T bar braket, braket clip assembly. Flexible length shall be upto 1200mm long. |
| 200 | Providing and fixing of UL listed electrically operated flow indicating switch (vane type) of following diameter with threaded connection with flexible full bore paddle & NO/NC contact terminals as specified complete with all accessories and necessary wiring. : For 150mm dia line |
| 201 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING Mild Steel Black pipe (IS:1239 Part-1) heavy class including cutting, welding/serving etc. and providing all UL/FM listed DI fittings viz. flanges. bends,Tees, Elbow, Reducers.Clamps. Hangers, necessary supporting arrangement etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same to the approval of engineer/consultant complete including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work.Note : Pipes upto and 50 mm dia shall be threaded joints, above 50mm shall be welded joints. 150 mm dia |
| 202 | 100 mm dia |
| 203 | 80 mm dia |
| 204 | 65 mm dia. |
| 205 | 50 mm dia |
| 206 | 40 mm dia |
| 207 | 32 mm dia |
| 208 | 25 mm dia |
| 209 | Providing and fixing 25 mm dia inspecting & testing assembly with gunmetal valve, gunmetal sight glass, bypass valve & connected to drain line. |
| 210 | Providing and fixing cast iron wafer type horizontal/ vertical non return valve complete with flanges tested to 16 Kg./m2.: For 150 mm dia pipes |
| 211 | Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 \\" BSP bottom entry on Pump Delivery Line complete with Ball valve |
| 212 | Supply & Fixing of Fire Man's Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS ;926 |
| 213 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.: 2 x 1.5 sq. mm |
| 214 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm dia |
| 215 | 40 mm dia |
| 216 | 32 mm dia |
| 217 | 25 mm dia |
| 218 | Supplying, Installation, Testing & Commissioning of Local Fire authority approved Electric Driven Main fire pump for Sprinkler / Hydrant applications suitable for automatic operation and consisting of following details given as A, B, C, D, E, F and G .(A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge , with necessary Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump.(B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal.(C) Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head(D) Squirrel cage induction motor suitable for 3 phase, 415 V, 50 HZ, Ac supply 2900 / 1450 RPM T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible coupling , coupling guard complete in all respect .( E) Common bed plate fabricated from mild steel channel for installation of pump and Motor(F) Pump is to be inspected by third party like RITES / PDIL at manufacturer's premises and inspection report is to be submitted.(G) Suitable cement concreat foundation duly plastered with anti vibration pads.2280 LPM suitable for 88 Mtr Head, multi stage, 1500 RPM |
| 219 | SITC of Local fire authority approved Diesel Engine driven Pump suitable for automatic operation as per discharge defined beolw consisting of the following details given as A, B, C, D, E and F .(A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump.(B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal(C) Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head.(D) Radiator cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1500 / 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump,Antivibration damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically if the Normal electrical supply fails with a unit of battery bank of 12/24v,180 Ah, Lead Acid Battery with Boost / Trickle charger as required for operation of Diesel engine, Exhaust Pipe of suitable diameter minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumping set,(E) Pump is to be inspected by third party like RITES / PDIL at manufacturer's premises and inspection report is to be submitted.(F) Suitable cement concreat foundation duly plastered with anti vibration pads.2280 LPM suitable for 88 Mtr Head, multi stage, 1500 RPM |
| 220 | Supplying, Installation, Testing & Commissioning of Local Fire authority approved Electric Driven Fire curtain applications suitable for automatic operation and consisting of following details given as A, B, C, D, E, F and G .(A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge , with necessary Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump(B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal.(C) Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head(D) Squirrel cage induction motor suitable for 3 phase, 415 V, 50 HZ, Ac supply 2900 / 1450 RPM T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible coupling , coupling guard complete in all respect .(E) Common bed plate fabricated from mild steel channel for installation of pump and Motor(F) Pump is to be inspected by third party like RITES / PDIL at manufacturer's premises and inspection report is to be submitted.(G) Suitable cement concreat foundation duly plastered with anti vibration pads.450 LPM suitable for 45 Mtr Head |
| 221 | SITC of Local fire authority approved Vertical multistage Jockey pump with SS Body, SS impellor, SS shaft, mechanical seal coupled with Squirrel cage induction motor for automatic operation suitable for three phase, 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM ,T.E.F.C type confirming to IP:55 with flexible coupling and coupling guard with the pump ,Common bed plate fabricated from mild steel channel , Suitable cement concreat foundation duly plastered with anti vibration pads.: 180 LPM suitable for 88 Mtr |
| 222 | Supply, installation, testing and commissioning of Adequate Pressure switch of approved make for Electric pump, jockey pump and Diesel Engine Driven pump including necessary wiring and cut off valve up to central panel & other material as described in specifications.(As per requirement). |
| 223 | Providing, fixing, testing and commissioning of precharged air vessel (size 250 mm dia & 1200 mm height) fabricated shell from 8 mm thick & dished end 10 mm thick M.S. Plate for pressurization of hydrant/ sprinkler system complete with adequate pressure switches (as per design / requirement) with valve to operate as per operating sequences including 25 mm dia drain valve, air release valve with ball cock on top, 80 mm dia flanged inlet with isolating valve duly painted from inside and out side complete as required. |
| 224 | Providing, installation, testing and commissioning of stainless steel strainer of dia given below fabricated out of 1.6 mm. thick stainless steel sheet with 3 mm. dia holes with stainless steel flange of following sizes.: 200 mm dia nominal bore |
| 225 | Providing and fixing Installation Control Valve assembly comprising of vertical wet alarm valve, including 150 mm dia butterfly valve on both ends, hydraulic alarm motor & gong, 15 mm dia Test valve, 50 mm dia Drain valve and all necessary trimming connections including 2 nos.pressure guages as per manufacturer 's catalogue (UL/FM/LPC/TAC listed/approved). 150 mm dia |
| 226 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING Mild Steel Black pipe (IS:1239 Part-1) heavy class including cutting, welding/serving etc. and providing all UL/FM listed DI fittings viz. flanges. bends,Tees, Elbow, Reducers.Clamps. Hangers, necessary supporting arrangement etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same to the approval of engineer/consultant complete including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work.Note : Pipes upto and 50 mm dia shall be threaded joints, above 50mm shall be welded joints. 250 mm dia |
| 227 | 200 mm dia |
| 228 | 150 mm dia |
| 229 | 100 mm dia |
| 230 | 80 mm dia |
| 231 | 65 mm dia |
| 232 | 50 mm dia |
| 233 | 40 mm dia |
| 234 | 32 mm dia |
| 235 | 25 mm dia |
| 236 | Providing and fixing exhaust, Diesel engine driven pump exhaust M. S. pipe class 'C' 150 mm dia including fitting like flanges, bends, reducers, etc. 50 mm thick fibre wool insulation aluminium cladding, 22 gauge, necessary excavation, fixing of silencer connections at engine exhaust, necessary supports, back filling, cutting and making good, bird proof and weather proof flap complete in all respect as directed. |
| 237 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm dia (Class II) |
| 238 | 150 mm dia (Class II) |
| 239 | 200 mm dia (Class II) |
| 240 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm dia |
| 241 | Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683- all amended up to date finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. : 4.5kg |
| 242 | Supply and installing ABC (Powder Type) Fire Extinguisher HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and confirming bracket and confirming to IS:13849-1993.: 5.0kg |
| 243 | Supply and installing ISI marked under (IS:13386) 45 ltrs. capacity mechanical foam trolly mounted mobile fire extinguisher complete with braided discharge hose and initial charge of AFFF (Aquous Film Forming Foam) for D.G. Set. |
| 244 | Supply, installation of fire bucket stand including sheet metal (16 gauge) shade, platform and associated civil works for 4 Nos. bucket each set. |
| 245 | Supply, installation, testing and commissioning of exit sinage of photo luminescent on aluminium sheet of 1.0 mm (± 10%) containing lumigen-III as base chemical, covered with U/V stabilized coating size 450 x 200. |
| 246 | Providing & fixing of installation control valve with turbine type automatic alarm gong to be connected with control valve, drain & test valve and all other necessary components as per manufacturer's specifications complete as required.: 80 mm dia |
| 247 | Providing & fixing of water curtain nozzle in brass (ASTM B'16) suitable for 20 to 50 PSI effective working pressure, with 3/4\\" BSPT inlet and coverage of 2.5 meter either side at 1.4 Bar (K factor 25x80) |
| 248 | Providing and fixing deluge valve of required dia operated through a smoke sensor for initializing flow in the water curtain system.: 80 dia |
| 249 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.: 2 x 2.5 sq. mm [For linking deluge valve operation to Fire detection System.] |
| 250 | Supply, installation, testing and commissioning of following fire fighting panel suitable for 415 V, +/- 6% Volts, 3 phase, 4 wires, 50 Hz power distribution system. The panel shall be free standing floor mounting sheet metal enclosed dust and vermin proof conforming to IP-52, compartmentalized design, fabricated out of 14 SWG sheet steel, painting, earthing numbering, danger plate as per specifications and drawings , flush front with Aluminium busbars, separate earth bus bars to be provided throughout the length of the panel. The incoming and outgoing feeder breakers, fuses, indicating lamps etc shall be accommodated in a modular multitier arrangement. The painting shall done as per relevant IS codes/as specified in the specifications. Adequate size cable alley shall be provided all round the panel and in the back for each cable bending and termination. The panel shall be fabricated by TAC/Fire authority approved vendor. The outgoing feeders inside the panel shall be connected through solid bus bars. Flexible cable links are not acceptable. Bus bars shall be provided with heat shrinkable sleeves and shall be colour coded. The panels shall be suitable for cable entry from top. The minimum fault rupturing of all incoming and outgoing switches/breakers shall be 35 KA. The panels shall be fabricated after the approval of fabrication drawings. Note:- All wires and cables used will be FRLS. 2 Nos. earthing terminals shall be provided for 3 phase, 415 V, 50 HZ supply system. M Lifting hooks shall also be provided in case of large panels. Cadmium plated hardware shall be used in fabrication of Panels.Fire Fighting Panel(In UG Pump Room):INCOMING: One (1) No. 315A TPN MCCB (35 KA). Set of 4 strip 415 V aluminium bus bars of 400 A capacity and suitable length. Busbar calculation should be submitted for approval. 3 Nos. cast resin current transformer (300/5A). 1 No. digital ammeter 0-300 Amps with selector switch. 1 No. 0-500 V digital voltmeter with selector switch & 2 Amps Control MCB. 1 Set (3 Nos) of phase indication lamps with 2 A control MCB.OUTGOINGS: 1 Nos. 250 Amps TPN MCCB(35 KA) 1No.Automatic S/D starter complete (without over load relay and single phasing preventor feature). ON/OFF TRIP, indication lamp, contactors etc. suitable for Electric Driven Fire Pump. 3 Nos current transformers (250/5 A). Digital Ammeter 0-250 A with selector switch - 1 Set. Wiring from pressure switch to starter, 1 Nos. 100 Amps TPN MCCB(25 KA) 1No.Automatic S/D starter complete (without over load relay and single phasing preventor feature). ON/OFF TRIP, indication lamp, contactors etc. suitable for Electric Driven Fire Pump. 3 Nos current transformers (100/5 A). Digital Ammeter 0-100 A with selector switch - 1 Set. Wiring from pressure switch to starter, 1 Nos. 63 Amps TPN MCCB(25 KA). 1No.Automatic S/D starter complete (without over load relay and single phasing preventor feature). ON/OFF TRIP, indication lamp, contactors etc. suitable for Electric Driven Fire Pump. 3 Nos current transformers (60/5 A). Digital Ammeter 0-60 A with selector switch - 1 Set. Wiring from pressure switch to starter. Automation system for starting the diesel engine fire pump. The diesel engine driven fire pump shall start automatically in the event of pressure drop beyond preset limit on mains failure or failure of electrical driven pumps to start and logic necessary for automatic start of diesel engine along with battery charger for the diesel engine batteries. Window type fault indicator and with alarm for diesel engine faults like LLOP, HWT etc. as per manufacturer requirement. One No. digital hour meter for jockey pump. Boost/Trickle charger for starting the engine automatically with digital ammeter and voltmeter complete as required. Set of control system to make the system automatic as per functional requirements which is activated with pressure switches as per specifications and complete with all accessories as required.Notes : All switchgear used in starter feeder shall be type-2 co-ordinated. Vendor is required to submit manufacturers type-2 co-ordinated chart for the make used. All MCCB used in starter feeder shall be suitable for motor duty application. Separate neutral link to be provided wherever TP MCCB are used. Following provisions to be made in the fire panel: Audio visual alarm & indications having disconnect/reset facility with a range of 1/2 km. Annunciator to be provided in the Fire panel with hooter and acknowledge, test and reset PBs. The indication shall come on when electrical driven pump set fails to start on pressure drop or when there is power failure during pressure drop. Facility for mode selection ie auto or manual test & local/remote. Protection features & control cabling. Panel shall be interlocked in such a way when main fire pump starts on pressure drop in the header, supply to working chiller and A/C panel is disconnected. Remote indication of ON/OFF/ TRIP shall be provided through potential free contact. Provision of remote starting/ stopping (manual) of the engine shall be made. Sufficient No. of potential free contacts and terminals shall be provided for connecting it to BMS. |
| 251 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (Copper lugs for copper Cables) 3C X 95 sq.mm. (38mm) |
| 252 | 3Cx35 sq.mm (28mm) |
| 253 | 3C x 16 Sqmm (25mm) |
| 254 | 3C x 2.5 Sq.mm copper |
| 255 | 5C x 2.5 Sq.mm copper |
| 256 | Supply, installation, testing & commissioning of following sizes of 1100 V grade XLPE insulated PVC inner & outer sheathed, Aluminium, armoured cables, as per site conditions. 3C x 95 Sq.mm |
| 257 | 3C x 35 Sqmm |
| 258 | 3C x 16 Sqmm |
| 259 | Copper Conductor Armoured Control Cables : 3C x 2.5 Sq.mm |
| 260 | 5C x 2.5 Sq.mm |
| 261 | Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness |
| 262 | 150 mm width X 50 mm depth X 1.6 mmthickness |
| 263 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 264 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 265 | Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 150 mm dia sand cast iron drop connection |
| 266 | Extra for depths beyond 60 cm of sand cast iron drop connection complete: For 150 mm dia sand cast iron drop connection |
| 267 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 268 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall: 15 mm nominal outer dia Pipes |
| 269 | 20 mm nominal outer dia Pipes |
| 270 | 25 mm nominal outer dia Pipes |
| 271 | 32 mm nominal outer dia Pipes |
| 272 | 40 mm nominal outer dia Pipes |
| 273 | 50 mm nominal outer dia Pipes |
| 274 | 62.5 mm nominal outer dia Pipes |
| 275 | 75 mm nominal outer dia Pipes |
| 276 | 100 mm nominal outer dia Pipes |
| 277 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes |
| 278 | 25 mm nominal outer dia Pipes |
| 279 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge External work: 40 mm nominal outer dia Pipes |
| 280 | 50 mm nominal outer dia Pipes |
| 281 | 62.50 mm nominal inner dia Pipes |
| 282 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 283 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm dia |
| 284 | 40 mm dia |
| 285 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 286 | 20 mm nominal bore |
| 287 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore |
| 288 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50 mm dia |
| 289 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm dia nominal bore |
| 290 | Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm dia nominal bore |
| 291 | Providing and fixing cast iron butterfly valves tested to 15 kg/sq.cm pressure including flanges/MTA/FTA to connect with uPVC, Rubber gasket flanges, nuts, bolts,washer & painting complete as required .65 mm dia |
| 292 | 80 mm dia |
| 293 | 100 mm dia |
| 294 | Providing and fixing Brass floor clean out plug comprising of GI pipe, socket, elbow, extension piece caulked to pipe and cast brass plug with suitable inlet key for opening male threaded joint with GI class C pipe & socket. Including lead / drip seal caulked to CI pipes or CI class LA pipes complete as required. For 100 mm dia pipe |
| 295 | For 160 mm dia pipe |
| 296 | Providing and fixing complete shower assembly as per approved design and specification complete in all respects. |
| 297 | Making rain water khurra of following sizes with average minimum thickness 5 cm cement concrete 1:2:4 (1 Cement, 2 Coarse & 4 grade stone aggregate 20mm nominal size) over PVC sheet 1 m x 1 m x 400 micron finished with 12 mm plaster in cement mortar 1: 3 (1 cement, 3 Coarse sand) finished with floating coat of neat cement including rounding of edges and finishing of outlet complete in all respects. : 450 x 450 mm |
| 298 | Providing fixing of cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings complete 100 mm diameter pipe |
| 299 | 150 mm diameter pipe |
| 300 | Charges for mobilisation / transportaion of drilling rig,compressor and all accessories as required. Charges for digging of temporarory pit for borehole water. Charges for drilling of 10’' dia bore with reverse / direct rotary rig method depth up to 60 metre Charges for excavation for silt chamber (1.82 mtrs) and injection well (6.09 mtrs) depth and required dia complete in all respect.Providing , storing, installing and jointing of RCC pre-cast rings as per design made of M-25 concrete complete in all respect. For Recharge well and de-silt chamber. Charges for making RCC cover of required size including shuttering, concreting -M-25, manhole cover etc complete in all respects.Providing and fixing of 163 mm V wire Screen material is SS 304 screen , consisting of continous trapezoidal with spirally wound around fabricated cage slot size 0.75 mm collapse strength of pipe upto 9.6 kg/cm2 tensile strength of pipe 9.6 kg/cm2 , Designed velocity at the emtry of screen less than 0.03 mps connection MS Cylindrical sleeve type , Total length og each sleeve 107mm effective length 500 mm and overall length 750 mm complete in all respect. Vertical 203 MM horizontal V wire screen for silt chamber , Screen material is low carbonised steel cage , plus grit blasting , spray galvanizing with zinc metal coating , zinc metal coating is spray galvanizing ( Thermal Spray coating of zinc - TSZ ) involves depositionof molten zinc ( purity 99.5%) on to a prepared surface , The metal being sprayed is metal in an electric arc automized by compressed air and then projected on to the substrate has been prepared by Grit Blasting as per IS & BS standards IS 5905 IS 6586 BS 5493 plus powder epoxy hybrid , Thickness 40-60 microns : coating of screen anti oxidant powder coated . Pattern on screen wound on pipe consisting of contnous trapezoidal wire spirally wound around Pattern on screen wound on pipe consisting of contnous trapezoidal wire spirally wound around 9.6 kg/cm2 . Slot opening size 70 % . Effective length of screen 500 mm . The end connection one. HorizontalProviding and lowering of 140mm HDPE pipe of 8 mm wall thickness , perforated with zig zag holes into the bore complete in all respect including labour etc. Charges for supply of 150mm ID PVC plain pipe, 6.0 kg/cm2 pressure including sockets or foam core pipe. Providing and laying of 450 mm thick filtration media in the recharging well (crushed stones , activated carbons, charcol, gravel & sand), Charges for supply and fixing of HDPE couplers, screws, Flanges, gaskets,reducers , solvent, end cap etc. Providing and laying of Filtration media of 40 mm to 20 mm aggregates, coarse sand etc in base of silt chamber and recharge well. |
| 301 | Supply, installation, testing and commissioning of Intel Core i5, 6th Generation (Octa Core, w/HD4400 Graphics) (338-BEED), 8GB Dual Channel DDR3L 1600MHz (4GBx2) (370-AAPE), OptiPlex 3030 AIO CTO (210-ACEZ), Intel Integrated Graphics, Dell OptiPlex (490-BBFG), 128GB Solid Drive (400-ADLX), Windows 10 Professional, English, 64bit, US English (QWERTY) Dell KB212-B QuietKey USB Keyboard Black (580-AAQX), Up to 90% efficient PSU Base 49.5cm (19.5 INCH) Non-touch with Camera, Integrated (321-BBGU), 8x Slimline DVD+/-RW Drive (429-AAMY), OptiPlex 3030 Resource DVD (340-AIQP), Dell USB Optical Mouse MS111 (570-AACR), ENERGY STAR Version 6.0 (387-BBEZ), System Power Cord (Philipine/TH/US) (450-AAOJ), Safety/Environment and Regulatory Guide (English/French/Dutch) (340-AGIK), 1-Watt BIOS (340-ABMZ), Heat Sink for Integrated Graphics (412-AADE), AIO Stand OptiPlex 3030 (575-BBCG), 19\\" TFT monitor |
| 302 | A4 Size Color Inkjet Printer |
| 303 | Supplying, Testing and Commissioning of the Graphical Software providing the facility to create / provide the following, static and animate the Graphics, Navigation between pages, display of logs, changing the time zones.The BMS platform shall natively support standard communication protocols such as Modbus and BACnet™. The software should be Web Based Software Required to remotely monitor the system for 5 concurrent users. IT SHOULD HAVE INBUIT FEATURE OF EMAIL FOR SENDING CRITICAL ALARMS WITHOUT ADDITING ANY EXTERNAL SOFTWARE/HARDWARE. BASIC ENERGY MONITORING FEATURES LIKE ENERGY DASHBOARD, DAILY, WEEKLY, MONTHLY & YEARLY REPORTS OF ENERGY CONSUPTION ETC. SHOULD BE INTEGRAL PART OF SOFTWARE. |
| 304 | Supplying, Testing and Commissioning of the necessary Hardwares/Softwares for Integrating it with 3rd party Devices on Bacnet/Modbus.Chiller - 5 NosSecondary Chiller Water Pumps - 6 nosEnergy meters - 10 nosFire Alarm Panel - 1 noDG set - 2 nos |
| 305 | Network controller - Providing, installing, testing and commissioning of Network Supervisory Controller unit for connecting all controllers to it and transferring data to PC platform.(A) The unit shall comply following codes and standards: UL and CE.(B) The unit shall support OPEN STANDARD protocol BACnet and LONTALK (C) Shall be able to store reports and event logs.(D) WEB ENABLED.The controller shall be capable of connecting the future expansion DDCs / Integrators. The Controller shall be able to support both Lontalk & BACnet controllers. It should be able to connect atleast 240 controllers. It should have at least 3 configurable ports for connecting BACNET/MSTP devices & all these ports should be capable to work as Modbus port. Each port should be able to take at least 60 DDCs in a single loop. It should be capable of storing data at least for 72 hours without any battery in case of power failure & should have micro SD card for backup recovery. It should have capability to connect expansion modules for enhanced flexibility. It should be web enabled and should be able to work with any kind of search engine, it should have wi-fi capability to connect with remote devices. It should freely support Android and MAC mobile applications for remotely managing the system through GPRS for wi-fi connectivity without any additional cost. It should have a feature to be used as a gateway/router for 3rd party applications on BACNET. It should be web enabled and should not require any software for controlling/monitoring of hard wired points. |
| 306 | Programmable and Application specific controller - Providing, installing, testing and commissioning of filed mounted controllers of the following configurations and as per below specifications: (A) The programmable controllers processors shall be 32-Bit, 50 MH, LONchip BACnet Compatible.The DDC Controllers should be on BACnet & UL listed. The DDC controller shall be as per the I/O Summary. Main DDC Controller should have atleast 21 Input/Output point with atleast 3 Digital Inputs(DI), 2 Universal Inputs(UI), 2 Analog Outputs(AO), 5 Analog Inputs(AI)-Dedicatedly for temperature Input, 9 Digital outputs(DO). The above controllers shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with the Controllers. |
| 307 | Immersion type temperature sensors for measuring Chilled water & condenser water supply and return temperature (Range 32-140 deg. F) |
| 308 | Water Differential Pressure Sensor |
| 309 | Single Level Switch |
| 310 | Outside Temperature + Rh Sensors |
| 311 | Differential Pressure switch across the Air Handling Units for indicating the Fan & filter Status |
| 312 | Duct type temperature sensors for measuring Supply & Return air temperature at the Air Handling Units And TFAs (Range 45-150 deg. F) |
| 313 | CO sensors |
| 314 | Water Differential Pressure Switch |
| 315 | Inline Water flow switch |
| 316 | Current Relay |
| 317 | Liquid pressure transmitter |
| 318 | High/Low level switch |
| 319 | Flame proof single level switch (Diesel application) |
| 320 | Voltage Transducer |
| 321 | Unshielded Signal Armoured Cables, 2 C X 1.0 Sq.mm. stranded tinned Cu Conductor, flexible, PVC sheathed type. Signal Cable from Controllers to Sensors shall be used. |
| 322 | Shielded Communication Armoured Cables,2 C X 1.0 Sq.mm.stranded tinned Cu Conductor, flexible, PVC sheathed. Communication Cable from Controllers to Controllers & to Third Party Devices shall be used |
| 323 | Supplying, installing, testing and commissioning of GI Perforated Cable tary of following dia, complete with all accessories: 20x50x20 mm |
| 324 | Supply, Installation , Testing, Commissioning and Handling over of Passenger Elevator Gear less elevator having speed of 1 meter or above per second Serving different floors in the existing lift shaft as per specification of the tender document complete in all respect as per Satisfaction of Engineer-in-charge including obtaining permission from concerned Govt regulatory/ authority with following specs IS: 4666. 1968 for electric passenger lifts and shall further Comply to IS : 1860:1960, IS: 63831,1971, IS: 732: 1963 and Bombay lift act 1943 amended up to date.Traction steel Hoist ropes / Belt Drive as per relevant ISI code.No of floors :Six levelsOperation : Microprocessor based simplex / duplex collective full collective Selective operation with or without attendantDrive : Variable voltage variable frequency (V3F) with Regenerative DriveDoors Automatic Centre / side opening Door panel of Stainless Steel in Hairline finishMachine : Gearless Machine to be placed directly above Hostway including the cost of machine room and pit as per manufacturer specs The guide rails should be steel dually toughened and ground section to ensure position tract and smooth runing of the elevator. Guide rails. Design of car body Constructed out of Stainless Steel Hairline finish Car and Car Doors with Stainless Steel handrail. And Poly vinyl tile flooring Car light to be Florescent tube light fitting to have daylight effect inside the Car cabin. Fan/blower in the car as per manufacturing enriched design. Floor position indicator at all floors along with direction of travel indicator.Power supply shall be provided as under:A. 415 volts, 3 phase, 4 wires 50 HzB 230V, Single Phase, 50 Hz for lighting.C. All electric cables, controls switchgears should be stricty as per ISI.Signals : (A) Luminous hall buttons at all floors.(B) Digital hall position indicators at all floors.(C) Car operating panel with luminous floor buttons(D) Digital car position & Direction indicator.(E) AC/ DC VF Door Drive.(F) Emergency light & emergency alarm through inverter (Rechargeable batteries).Spring buffers or as per suppliers designDefect Liability : 2 years from date of handling over of lifts as per details mentioned in terms & conditions attached herewith.The lift suppliers include Cost of1. Scaffolding inside the hoist way for erection2. Cutting of walls with repair Including all of bolts members indicator and button boxes etc. in position.3. Sill angles, fascia plates, machine Beams and rolled steel section with bearing plates for support of the nmachine if required.4. Door frames.5. Pit LadderCar safety and Governor to control excessive descending speed. Counter balance to promote smooth and economic operation. Terminal and final limits. Terminal buffer. Controller to control starting speed of elevator motor and supply brake automatically in case of application of any of the safety device or power failure. Steel glides for the car and counter weight. The elevator should be equipped with the over speed governor safety system. Inspection unit shall be provided at the top of car. Rechargeable battery based Emergency light & alarm. Fireman's Switch Door open & Door close button Full Height Infrared Curtain Auto On/Off for car light and fan inclusive of Cost of voltage stablizer (if required) and SMF Batteries. Vat,Service tax,excise duty, Freight,octori etc. Insurance transit and up to handling over of lift.Passenger lift 10 persons 680 kg speed 1M per sc or above, power operated, ACV VVF control-6Level |
| 325 | SEWERAGE TREATMENT PLANT (STP) MBBR TECHNOLOGY 26 KLD:Design, Engineering, and providing all equipment /machinery at site, installation and commissioning of equipments/ electrical/ piping inclusive of all types of taxes and duties and necessary civil work as described in specificationBAR SCREEN:Supplying, installing, testing and commissioning of bar screen consisting of 1no. of fine screen and one number coarse shall be provided in front of the intake works, so as to exclude the large sized particles with associated set of guide angles in MS flat of 6.0 mm thick and 50 mm wide kept inclined at 45 degree to the horizontal at 40mm c/c with one no. hand rack in GI. bar rack fabricated from SS‐ 304 bars to the width of the screen chamber with lifting arrangement for manual operation. Size : 800 x 600RAW SEWAGE PUMP:Supply, installation, testing & commissioning of Horizontal Centrifugal / Vertical Submersible sewage pumps with solid handling capacity up to 18 ‐ 20 mm with CI casing & CI impeller complete with all accessories, motor of required capacity. The pumps will be complete with Delivery header with, pressure gauge on delivery line with isolation level controller (with wiring) to control the level of Sump automatically . Pumps & Other associated works & accessories, shall have following duty: Duty: 1.5m3/hr@ 10 M head. (1W+1S)COARSE BUBBLE DIFFUSER:Supply, installation, testing & commissioning of adequate capacities of coarse air diffusers in Equalization tank, Treatment tank, Sludge holding tank & other associated works & accessories etc.complete of size (to suit MBBR) diffusers of Scogen / Equivalent MakeFINE BUBBLE DIFFUSER:Supply, installation, testing & commissioning of adequate capacities of fine pore diffusers for MBBR Reactors & other associated works & accessories etc. complete of size (to suit MBBR) ‐ Tubular Membrane Type DiffusersAIR BLOWER:Supply, installation, testing & commissioning of Twin type rotary air blowers for treatment tanks for the following capacity and pressure pressure through\\"V\\" belt or directly coupled through flexible coupling to a TEFC motor of suitable H.P suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. The blower & motor will be complete with base frame, header, valves, pressure gauge & other associated works & accessories etc.complete of Kay International Make, Duty:50m3/hr @ 0.5 KG/CM2SLUDGE TRANSFER PUMP:Supply, installation, testing and commissioning of Submersible / Centrifugal sludge transfer pump capable of solid handing upto 25mm as per manufacture specifications & other associated works & accessories etc.complete, Duty: 1.5 m3/hr @10 M head. (1W+1S)FILTER FEED PUMP:Supply, installation, testing and commissioning of centrifugal self priming filter feed pump & other associated works & accessories & as per manufacture specifications below, Duty: 1.5 m3/hr @30 M head. (1W+1S)CHLORINATOR:Supply, installation, testing and commissioning of electronic metering type of Chlorine dosing pump & other associated works & accessories etc.complete.PRESSURE SAND FILTER:Supply, installation, testing and commissioning of Pressure Sand filter, of FRP suitable for a loading rate of 15 cum/hr/sqm & other associated works & accessories etc.complete. 500mmX1200mmACTIVATED CARBON FILTER:Supply, installation, testing and commissioning of Activated Carbon filter, of FRP suitable for a loading rate of 15 cum/hr/sqm & other associated works & accessories etc.complete. 500mmX1200mmSLUDGE HANDLING ‐ BAG FILTER:Supplying, fixing and commissioning of Bag Filter made of SS suitable for sludge handling, complete with all accessories and 20 spare bags suitable for 2 Bag system.INTER UNIT PIPING:Supply,and fixing Plant Piping with CPVC / UPVC 10 Kg/sqcm pipes with fittings and approved make valves, gauges, instrumentation etc., for all plumbing lines and MS B Class pipeline with fittings for Blower Air LinesSTP ELECTRICAL PANEL:Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin proof Panel (Indoor type) with IP 54 ingress protection, fabricated from 2 mm thick CRCA sheets, with hinged, gasketted and lockable doors including the cost of interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system with 16 KA rupturing capacity at 415 volts complete. Electrical Motor Control Centre shall be suitable for all equipments connected to the STP with 3 Nos of spare feeders.CABLES AND CABLE TERMINATIONS:Inter unit cabling for all equipments with necessary armoured/ unarmoured cables with necessary termination lugs, glands etc completeSTATUTORY APPROVAL:Commissioning and obtaining the statutory approvals from the concerned |
| 326 | Supply installation testing & commissioning of Skid mounted vertical inline/horizontal constant speed dual pump set suitable for 415/230 Volts power supply with 3/1-phae T.E.F.C. induction motor complete with isolating valve on suction and discharge, level switch non return valve on discharge, dry running protection, electric control panel and all sockets as required for control automation panel.The pump shall have mechanical seal.The control panel should have the provision of auto changeover of pump operation at each 2 Hrs running interval.The panel should also have the provision of manual overide changeover of the pumps.Pump shall start/stop automatically as per high/low level in the water tank and all necessary arrange for the same shall be included in the qouted price.Following MOCs shall be complied:Pump Body : CIImpeller : Stainless Steel(AISI 304)Diffuser : Stainless Steel(AISI 304)Outer Sleeve : Stainless Steel(AISI 304)Shaft : Stainless Steel(AISI 304)Seal Housing : Stainless Steel(AISI 304)Elastomers : EPDMCoupling Protection : Stainless Steel(AISI 304)Shaft sleeve & Bushing : Tungsten CarbideFurther to above, following specs shall also be complied:Ingress Protection : IP54Motor Insulation class : F ClassMotor Efficiency : IE3DOMESTIC WATER TRANSFER PUMPCapacity/Flow Rate - 3.0 M3/Hr Head - 4.0 kg/cm² or as required1 Set =2 Nos. pump (1 working+1 standby) |
| 327 | COOLING TOWER WATER TRANSFER PUMP (FROM UG TANK)Capacity/Flow Rate - 5.0 M3/Hr Head - 4.0 kg/cm² or as required1 Set =2 Nos. pump (1 working+1 standby) |
| 328 | FLUSHING WATER TRANSFER PUMPCapacity/Flow Rate - 3.0 M3/Hr Head - 4.0 kg/cm² or as required1 Set =2 Nos. pump (1 working+1 standby) |
| 329 | COOLING TOWER WATER TRANSFER PUMP (FROM STP)Capacity/Flow Rate - 5.0 M3/Hr Head - 4.0 kg/cm² or as required1 Set =2 Nos. pump (1 working+1 standby) |
| 330 | IRRIGATION WATER PUMPCapacity/Flow Rate - 2.5 M3/Hr Head - 2.5 kg/cm² or as required1 Set =2 Nos. pump (1 working+1 standby) |
| 331 | Supplying, testing and commissioning of centrifugal submersible sump pumps complete in SS304, suitable for 415 ± 10% Volts, 3 phase/230 ±10% volts 50 Hz A.C. power supply. Each pump shall suitable for automatic/manual operation complete with control panel, high low level controller for each pump, necessary wiring and all arrangement required to make the system operatoinal as per specification.IN PUMP ROOM SUMPCapacity/Flow Rate - 2LPSSet in Pressure - 12mtr head.Solid Handling - 50mm1 Set =2 Nos. pump (1 working+1 standby) |
| 332 | IN STP SUMPCapacity/Flow Rate - 2LPSSet in Pressure - 12mtr head.Solid Handling - 50mm1 Set =2 Nos. pump (1 working+1 standby) |
| 333 | IN LOWER BASEMENT SUMPCapacity/Flow Rate - 2LPSSet in Pressure - 12mtr head.Solid Handling - 50mm1 Set =2 Nos. pump (1 working+1 standby) |
| 334 | CONSTRUCTION OF OFFICE BUILDIING FOR MUNICIPAL CORPORATION PANCHKULA AT PLOT NO. IP-3, SECTOR-3, PANCHKULA UNDER CM ANNOUNCEMENT CODE NO. 19916 DATED: 01.08.2017 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender