Tender For Restoration Of Rain Damages To Lwss Bhaddu Chaswal In G.P. Chaswal & Gharwasra, Tehsil Dhar Ur, Distt. Mandi (H.P.) (Sh: Construction of Reinforced Cement Concrete Filter Bed Unit Of 10 Sqm.
Tender Value
4.79 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
7 days left
EMD
10000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Bhaddu Chaswal In G.P. Chaswal & Gharwasra, Tehsil Dhar Ur, Distt. Mandi (H.P.) (Sh: Construction of Reinforced Cement Concrete Filter Bed Unit Of 10 Sqm.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of surplus excavated earth upto all leads and lifts in Pick, jumper work as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 2 | Excavation in earth work and disposal of excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed in Pick-Jumper work. |
| 3 | Providing and laying cement concrete 1:3:6 (1 Cement : 3 Sand :6 graded stone aggregate 40 mm nominal size) and curing complete work excluding cost of form work in foundation and plinth as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 4 | Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : |
| 5 | Foundation ,footing, basis of columns and the like mass concrete as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 6 | Walls any thickness including attached pillaster buttresses plinth and string courses from top of foundation up to all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 7 | Suspended floor roofs, landing ,shelves and their supports balconies beams, girders, bressumers and cantilevers upto all floor level in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 9 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc upto 200 mm in thickness with in all leads and lifts as per direction of Engineer-in-Charge. |
| 10 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 11 | Providing and fixing Tor Steel reinforcement for work including in position including cost of binding wire upto all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 12 | White washing with lime on undecorated wall surface two coats to give an even shade I/c throughly brooming the surface to remove all dirt, dust, mortar dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge. |
| 13 | Providing and fixing of 3.15mm MS Sheet Manhole cover 600X600mm fixed on all sides with ISA 40x25x5mm top angle iron frame hinged on ISA 35x35x5mm bottom angle iron frame as per drawing. Pieces of MS Flat 20x4mm, 0.15m long be fixed on all sides as hold fast. The operation of manufacturing shall including cutting of MS Sheet, Angle Section & welding of MS Sheets, Angle Section, Hinges, Handles 150mm long, 20x4mm flats, locking arrangement and applying a priming coat of steel primer after pretreatment of surface to the entire satisfaction of the Engineer-in-Charge. |
| 14 | Laying, jointing and testing in trenches galvanised mild steel tube of light grade screwed and socketed complete including providing and fixing tube fitting such as union, teen, socket etc (excluding cost of bends and valves) for the following dia as per direction and to the entire satisfaction of Engineer-in-charge. |
| 15 | 50 mm dia |
| 16 | Providing and fixing double flanged Cast Iron sluice valve of following dia of Kirloskar/Leader/vir make conforming to IS:14846/2000 with up to date amendment as per Class PN-1.00 to withstand in normal seat pressure of 10.20 Kg/cm³ including welding with M.S. Flanges table-5 as per IS 6392-1971 including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 17 | 50 mm dia |
| 18 | Providing and placing in horizontal layers filtering media duly graded, screened, washed and cleaned as specified by the Engineer-in-Charge. |
| 19 | Top layer: Fine sand screened, cleaned, washed and graded effective size 0.2 to 0.4mm with uniformity cofficient 2.0 to 3.0 from approved source |
| 20 | Second layer: Coarsed sand screened, cleaned, washed and graded from 3mm to 6mm from approved source |
| 21 | Third layer: Bajri screened, washed and graded from 6mm to 20mm from approved source |
| 22 | Fourth layer: Bajri (coarsed) screened, washed and graded from 20mm to 25mm from approved source |
| 23 | Bottom layer: Broken stone screened, washed and graded from 50mm to 75mm from approved source |
| 24 | Bricks layer under bottom layer of filter media Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender