Tender For Renovation Of House No. 1910 (Type- Viii), Sector-39, Chandigarh Under Eecp Division No. 4, Chandigarh (Ibm No. W4/2026/26095) (Phs).
Tender Value
1.07 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
2144
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of House No. 1910 (Type- Viii), Sector-39, Chandigarh Under Eecp Division No. 4, Chandigarh (Ibm No. W4/2026/26095) (Phs).
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 2 | All kinds of soil |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. |
| 4 | Pipes, cables etc, exceeding 80 mm dia but not exceeding 300 mm |
| 5 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 6 | Kitchen sink without drain board |
| 7 | 610x510 mm bowl depth 200 mm |
| 8 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 9 | Semi rigid pipe |
| 10 | 32 mm dia |
| 11 | Providing and fixing soil, waste and vent pipes : |
| 12 | 100 mm dia |
| 13 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 14 | 75 mm diameter : |
| 15 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 16 | Providing and fixing heel rest sanitary bend |
| 17 | 100 mm dia |
| 18 | Sand cast iron S&S as per IS - 1729 |
| 19 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 20 | 100 mm inlet and 75 mm outlet |
| 21 | Sand cast iron S&S as per IS - 3989 |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall |
| 23 | 20 mm dia nominal bore |
| 24 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 25 | 15 mm dia nominal bore |
| 26 | 20 mm dia nominal bore |
| 27 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 28 | 20 mm nominal bore |
| 29 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 30 | 20 mm nominal bore |
| 31 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 32 | 45 cm length |
| 33 | 15 mm nominal bore |
| 34 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 35 | 15 mm nominal bore |
| 36 | 20 mm nominal bore |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 38 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 39 | Cutting holes up to 30 x 30 cm in walls including making good the same: |
| 40 | With common burnt clay F.P.S. (non modular) bricks |
| 41 | Looking glass mirror 5 mm thick of approved make with PVC beading 1-1/4\\"x3/4\\" with plastic Hard Board duly fixed on wall with screw/nuts/clips/rod plug |
| 42 | Providing and fixing of Bib cock with wall flange, make Jaquar range Continental CON-047N or in same range of AOR of approved make list |
| 43 | Providing and fixing of Long nose Bib cock with wall lange, make Jaquar range Continental CON-107KN or in same range of AOR of approved make list |
| 44 | Providing and fixing of Anglular stop cock with flange make Jaquar range Continental CON-059KN or in same range of AOR of approved make list |
| 45 | Providing and fixing of Over Head Shower 150x150 mm Single flow Square shape with shower Arm 9\\" long ISI as per approved make list |
| 46 | Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make as per approved make list |
| 47 | Providing and fixing of C.P. Towel Ring oval with round flange complete in all respects make as per approved make list |
| 48 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make as per approved make list |
| 49 | Providing and fixing of drip seal joint of various sizes |
| 50 | 100 mm |
| 51 | 75 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender