Tender For Special Repair/Renovation Of Fire Station Building & Residential Quarters In Sector 17, Chandigarh.
Tender Value
49.54 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
99080
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Renovation Of Fire Station Building & Residential Quarters In Sector 17, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below (DSR 15.12.1) |
| 2 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge (DSR 14.1.1) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar (DSR 15.7.4) |
| 4 | Brick work with common burnt class F.P.S.(nonmodular) bricks of class designation 7.5 in superstructure aboveplinthlevel up to floor V level in all shapesand sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) |
| 5 | 15 mm cement plaster of mix 1:4 (1 cement : 4 fine sand) complete in all respect to the entire satisfaction of the E.I.C (DSR 13.2.1) |
| 6 | Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR 14.46 |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (DSR 13.80) |
| 8 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) (DSR 14.45.1:) |
| 9 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer:- (DSR 13.41.1) |
| 10 | Finishing walls with Acrylic smooth exterior paint : Old work (one or more coats) applied @ 0.90 Ltr./10 Sqm). (DSR 14.66.1) |
| 11 | Finishing walls with Acrylic Smooth exterior paint : New work (Two more coat ) complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 12 | Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile BFixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). (DSR 10.14.1.2) |
| 13 | Providing and fixing ISI marked flush door shutters confirming to IS 2:2202(Part-I) non decorative type core of block board construction with frame 1st class hollock wood and well matched commercial 30 ply veneering with vertical glanes or cross bands or face veneer on both faces of shutters 35mm thick including ISI marked stainless steel butt hinges with necessary screws (DSR 9.21.1) |
| 14 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood :35 mm thick (DSR :9.9.1.1 ) |
| 15 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters : with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood (DSR 9.27.1.1.1 ) |
| 16 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thick (DSR 14.5.1) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (DSR 14.54.1) |
| 18 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge 1:3:6 or richer mix DSR 15.2.1 |
| 19 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge 1:4:8 or leaner mix DSR 15.2.2 |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (DSR 15.23.1) |
| 21 | Providing and laying Antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades,laid on 3mm thicknes average on based high polymer modified quick set tile adhesive conferming to IS:15477, complete. (N.S) |
| 22 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand):25 mm thick. (11.26.1) |
| 23 | Kota stone slabs 20 mm thick in isers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment tomatch the shade of the slabs, ncluding rubbing and polishing omplete(11.26.2) |
| 24 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR 11.36 |
| 25 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (11.41.2) |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) omplete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete (17.31) |
| 27 | Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters :Superior class teak wood including nickel plated bright finished M.S. pianohinges with necessary screws.DSR 14.26.1.1 |
| 28 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 5.3) |
| 29 | Providing and fixing of lay-in-grid false ceiling consisting of ceiling tiles (as per approved sample). 6mm thick of size 600mm x 600mm lay-in-modular grid/suspension system (hot dipped galvanized steel) of standard T-Section having its flanges face powder coated colour white suspended from ceiling and secured with clips and G.I. wire etc. with following details:- (a) Wall angle shall be XL-15mm and 3000mm long (b) Main runners shall be T-shaped section with single rotary stitching of size XL 15mm and 3000mm long. (c) Cross runners shall be T-shaped double rotary stitching of size XL 15mm and 1200mm long. (d) Cross runner T-section of size XL 15mm and 600mm long and P/L 50mm thick rock wool over ceiling. The complete work shall include the cost of all material and labour and lead and fit complete as per Architectural Drawings and to the entire satisfaction of Engineer-in-charge. |
| 30 | Providing and fixing 4mm thick polished veneer over 9 mm thick commercial ply over USG Boral frame U Channel 50x50x0.55mm both side 2’-0” centre to centre (Horizontal & vertical) with back filled of 50mm thick rock wool with 48kg density, packed with tissue paper to achieve NRC 0.7% (manufacturing test certificate is required at the time of billing ) along with 12mm thick commercial ply & PVC grippers as per site including covered the Jamb for door & windows i.e upper, bottom sides & sills area by providing color matching sunmica over 12mm thick commercial ply as per site requirements. The rates also include the cost of all material and labour and lead and fit complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 31 | Extra for providing computerized laser cutting to ply/board/veneer wherever required as per site requiement complete in all respect to the entire satisfaction of Engineer-In-Charge. |
| 32 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR 15.26) |
| 33 | Demolishing mud phaska in erracing and disposal of material within 50 metres lead. (DSR 15.27) |
| 34 | Painting top roofs with bitumen of approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete (with residual type petroleum bitumen of penetration VG-10 bulk to the entire satisfaction of the E.I.C. DSR 12.15.1 |
| 35 | Providing and laying position revounding layer in the form of polythene sheet 125 micron thick (subject to approval of Engineer-in-charge) laid flat with over laps of 300mm width (NS) |
| 36 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat:With common burnt clay F.P.S.(non modular) brick tile of class designation 10 DSR 12.16.1 |
| 37 | Credit of brick tiles removed from the site of work. |
| 38 | Credit of brick bats removed from the site of work. |
| 39 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design (DSR 12.21.1) |
| 40 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx 1mx 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete. (DSR 12.22) |
| 41 | Providing and fixing 100mm dia PVC pipe of heavy duty including cost of sockets required length complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 42 | P/F UPVC moulded fittings/ accessories for UPVC rain water pipes- Shoe (Plain) 110 mm (DSR 12.42.6.2) |
| 43 | Providing and fixing on wall face unplasticised - PVC moulded fitting /accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type - A including jointing with seal ring conformation to IS 5382 leaving 10 mm gap for thermal expansion . Bend 87.5 degree , 110 mm bend . (DSR 12.42.5.2) |
| 44 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm DSR No. 9.96.1 |
| 45 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm DSR No. 9.96.2 |
| 46 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm DSR No. 9.97.1 |
| 47 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm DSR No. 9.97.2 |
| 48 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm DSR No. 9.97.3 |
| 49 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm DSR No. 9.100.1 |
| 50 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm DSR No. 9.100. 2 |
| 51 | Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. (DSR 9.102) |
| 52 | Steel work welded in built up section / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In grating, frames, guard bar, ladder, railings, (10.25.2) |
| 53 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22A.6 |
| 54 | Credit of doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc complete in all respect and to the entire satisfaction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender