Tender For Repair To Joinery Work, Plaster, Sanitary Fittings, Tank Cleaning, False Ceiling, Roofing, Tilling Work And Cleaning Of Sewage Line Septic Tanks And Manholes Of Domestic And Tech Area At Af Stn Madh Island Under Ge(Af) Thane
Tender Value
14.50 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
10 days left
EMD
29000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery Work, Plaster, Sanitary Fittings, Tank Cleaning, False Ceiling, Roofing, Tilling Work And Cleaning Of Sewage Line Septic Tanks And Manholes Of Domestic And Tech Area At Af Stn Madh Island Under Ge(Af) Thane
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Aug-2026 | REVISED BOQ | BOQ | 02-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame, complete all as specified and as directed by Engineer-in- Charge |
| 2 | Taking down chowkats or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame, complete all as specified and as directed by Engineer-in- Charge |
| 3 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm, complete all as specified and as directed by Engineer-in- Charge |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (double door chowkate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm (double door chowkate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engineer-in-Charge. (Note: i) stainless steel butt hinges shall be paid separately and ii) cost of necessary S S screws shall be included in quated rate.) |
| 7 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Squar tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed Engineer-in-Charge. |
| 8 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F PVC factory made wire gauged shutter with wire gauge warpped on an additional square 8mm MS solid tube and this tube shall be welded to MS tube. The wires gauge shall be stretched to tighten firmly, PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm wigth stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail all as per specification and drawing given in SSR Part II, Schdule of rates 2010 and directed but as in four panels in lieu of two panels, complete all as specified and directed by Engineer-in-Charge. Note : The wire mesh shall be measured separately. |
| 10 | S&F 100mm size Butt hinges, extruded stainless steel hinge pin, anodised and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F aluminium extruded alloy handles fabricated type anodized 150mm long, complete all as specified and directed by Engineer-in-Charge |
| 13 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F in repairs aluminium body door closer hydraulically regulated designation No 3 universal type, suitable for door shutter of 851mm to 1000mm in width and wt. between 61 to 80 kg,complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F as in repairs double action floor spring hydraulically operated made up of miniumum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Taking down the unserviceable Aluminium glass door shutter of any size and description and refixing the same after resecuring the shutter by using aluminium 'L' section at the joints and refixing the glass in the shutter complete all as specified and directed by Engineer-in-Charge. (Note : All accessories required for repairs shall be measured seperately under other respective items) |
| 18 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make, complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and specified and directed by Engineer-in-Charge. |
| 20 | S&F 4 mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames , complete all as specified and directed by Engineer-in-Charge. |
| 21 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for rendering 15mm thick CM 1:6 on fair faces of brickworkor concrete surface and finised even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.Note : Plaster work carried out in different bldgs portion. , |
| 23 | M&L for preparation of new plastered or unplastered surfaces of ceiling and apply two coats of distemper oil emulsion over a coat of 2mm thick wall care putty, complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for rendering 10mm thick CM 1:3 on fair faces of concrete surface and finised surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note : Plaster work carried out in different bldgs portion. |
| 25 | M&L for preparation of old plastered or unplastered surfaces of ceiling and apply one coats of distemper oil emulsion, complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for rendering 15mm thick CM 1:4 on brickwork or concrete surface of walls and finised surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L for Preparation of new plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for preparation of old painted plastered surfaces and apply two or more coats of 100% Premium Acrylic emulsion paint having UV resistance, Alkali & fungal resistance, dirt resistance exterior paint with required shade (Company Depot Tinted) @ 1.43 litre/ 10 sqm each coat, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 29 | M&L for preparation of old painted plastered surfaces and apply two or more coats of 100% Premium Acrylic emulsion paint having UV resistance, Alkali & fungal resistance, dirt resistance exterior paint with required shade (Company Depot Tinted) @ 1.43 litre/ 10 sqm each coat, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender