Tender For Provn Of Store Room In Cwe Office Under Ge (Af) Tech Area At Af Station Agra
Tender Value
14.73 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
12 days left
EMD
29460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Store Room In Cwe Office Under Ge (Af) Tech Area At Af Station Agra
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation in soft/loose soil n. exc 30cm deep and averaging 15cm deep and getting out. complete all as specified and as directed |
| 2 | Excavation in trenches in soft/loose soil not exe 1.5 m wide and n exe 1.50 m in depth for foundation etc not exe 10 sqm on plan and n exe 1.5 m in depth and getting out in soft/loose soil n.exc 1.5 mtr deep and getting out complete all as specified and as directed |
| 3 | M& L for cement concrete type D-2, 1: 4: 8 ( using 40 mm graded aggregate ) as in foundation, filling and mass oncrete. |
| 4 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed. |
| 5 | M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia all as specified. |
| 6 | S&F MS TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. cut to length, bent to shape required including cranking and bending and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 7 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface . |
| 8 | Formwork to sides of columns and similar work; square,rectangular rough finished surfaces of concrete complete as specified and directed |
| 9 | Form work to sides and soffits of floor or roof beams, beam haunchings, girders,bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc complete all as specified and directed |
| 10 | M&L RCC M- 25 design mix using 20 mm graded stone aggregate in foundation , including rafts, footing , foundation beams, plinth beam , bases for column, slab for culvert etc complete as specified and directed by Engr-in-Charge |
| 11 | M&L RCC M-25 design mix( 20 mm graded stone aggregate) in columns etc complete as specified and directed by Engr-in-Charge |
| 12 | M&L RCC M-25 design mix ( 20 mm graded stone aggregate) in lintels,bends & beams etc complete as specified and directed |
| 13 | S&F mild steel framed roof trusses purlins,crane gantries,rails and fastening and heavy brackets framing( 9beams,Tee,angle,channel or flat sections) including distance pieces,cleats etc. Fe410-W(Gde-E-250) Quality A. complete all as specified and directed. |
| 14 | S&F mild steel works as in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 upto any ht of bldg complete all as specified and directed. |
| 15 | S&F Pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 16 | S&F Pre-painting galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 17 | M&L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone complete all as specified and directed. |
| 18 | M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor etc |
| 19 | M&L for 40mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base of floor etc |
| 20 | M&L for 8-10mm thick vitrified ceramic tiles, light shade double charged (square/rectangular ) area of each tile exceeding n. 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15mm thick in CM(1:6) for laying floor finishes complete all as specified and as directed. |
| 21 | All as per item no. 20 above but as in skirting |
| 22 | S&F powder coated (minimum thickness of powder coating 50 micron) Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 23 | S&F powder coated (minimum thickness of powder coating 50 micron) Aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges,anodised aluminium snap beading screws etc complete all as specified and as directed. |
| 24 | S&F for Powder coated aluminium anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary aluminium anodised joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed(Minimum thickness of powder coating 50 micron) |
| 25 | M&L 5.5mm thick Sheet glass, selected qyality, in square exc 0.50 sqm in each pan complete all as specified and directed. |
| 26 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 27 | S&F anodised aluminium grill, 10mm thick diamond shape with aperture 75 mm fixed to windows frame with CP brass / stainless steel screw @ 200 mm c/c, including cutting the grill to proper opening size complete all as specified and directed. Make -Deco Grill, model DG-104 or equivalent in Jindal/ Hindalco. |
| 28 | M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and directed. |
| 29 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even in CM (1:6) complete all as specified and as directed. |
| 30 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even in CM (1:4) with WPC complete all as specified and as directed. (WPC measured and paid separately). |
| 31 | Supply only water proofing compound. |
| 32 | M&L for preparation of newly plastered surfaces of wall and applying two coat of weather proof exterior emulsion paint in normal pattern,over a coat of primer complete all as specified and as directed. |
| 33 | M&L for two coats of distemper oil emulsion over old plastered surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 34 | M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 35 | M&L for preparation of newly steel surfaces of any description not exe 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 36 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed |
| 37 | Removing excavated material of soil not exc 250 m but n exe 500 m and depositing where directed at a level n.exc 1.5 mtr above the starting point |
| 38 | M&L for point wiring complete with multistranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including PVC conduit ISI marked not less than 20mm dia concealed in wall/roof/floor etc with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed: -(a) One light/fan/exhaust fan point controlled by one way 5 Amp switch. |
| 39 | (b) One 3 pin/5 pin socket out let 5 Amp on same board |
| 40 | (c) One 3 pin/5 pin socket out let 5 Amp on independent board |
| 41 | All as per srl item no. 38 above but for 3/5 pin socket outlet for 15 Amps on independent board with 2.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 2.50 sqmm PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor complete all as specified & directed. |
| 42 | S&F switch piano, flush type 5 Amp single pole one way complete all as specified & directed. |
| 43 | S&F socket out let, flush type 5 pin 5 Amp complete all as specified & directed. |
| 44 | S&/F switch piano, flush type 15 Amp complete all as specified & directed. |
| 45 | S&/F socket outlet multi purpose 3 pin 15 Amp flush type complete all as specified & directed. |
| 46 | S&F ceiling rose surface bakelite ISI Marked three terminal complete all as specified & directed. |
| 47 | S&F surface/wall mounting LED batten,extruded aluminium housing provided for efficient heat dissipatin with poly carbonate diffuser & intergrated electronoc driver including 20 watt LED complete fitting as specified and directed |
| 48 | M&L for factory made sheet metal enclosure MCB DB 230 volts,SPN, 4 ways with 200A rated bus bar, double door type IP43 suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed. |
| 49 | Supply & fix MCB, SP, AC, 240 volts of 06 to 40 Amps capacity \\"C\\" series and making connections complete all as specified & directed. |
| 50 | Supply and fixed MCB SPN 40 Amp 230V, 'C' series 10 KA, complete all as specified and directed. |
| 51 | Material & labour for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.00mm thick burried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire 4 sqmm as earthin lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by medium 40 mm dia GI pipe connected to main switch board or main control board or equipment and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, 40mm thick RCC pit cover reinforced with 8mm dia TMT bar at 75c/c both ways and lifting arrangement by providing handles (02 Nos) of 12mm dia MS round bar and PCC chamber pit with PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) including excavation and earth work in soft/loose soil, returning, filling in with excavated soil and disposal of surplus spoil to a distance not exceeding 50m and shown in electrical Plate No 3 of SSR 2009 (Part-I) complete all as specified and directed. |
| 52 | S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including all fixing material complete all as specified and directed. |
| 53 | Supply and Laying XLPE insulated LT UG cable PVCsheathed , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor 10 Sqmm 2 core laid in trenches or fixed on wall/floor/poles complete all as specified and directed. |
| 54 | M&L for GI pipe of size 40mm bore, light grade for protection to cable under roads and coping to loop-in-loop out Jn box fixed to street light pole including necessary fixing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender