Tender For Repair/ Maintenance Of External Water Supply Distribution System At Khundru Under Ge 861 Ews
Tender Value
14 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
12 days left
EMD
28000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of External Water Supply Distribution System At Khundru Under Ge 861 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable, pipes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in Soft/ Loose soil complete all as specified and as directed by Engineer-in- charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in any type of soil complete all as spefied and as directed by Engineer-in-Charge. |
| 3 | Removing excavated material/soils to a distance not exceeding 50 mtr and depositing where directed at a level not exc.1.5 mtr above the starting point, complete all as spefied and as directed by Engineer-in-Charge. |
| 4 | Material and Labour for Lagging to pipes used in external water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAPON’ pipe sections of density 144 Kg/cum conforming to IS 9842nor equivalent and provided chicken wire mesh netting 25 gauge 20mm meshing and plaster of paris 3 to 5mm thick all around the mesh after breaking old unsv/broken lagging for the 20mm GI tubing all as specified and directed by Engineer-in-Charge |
| 5 | Material and Labour for Lagging to pipes used in external water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAPON’ pipe sections of density 144 Kg/cum conforming to IS 9842nor equivalent and provided chicken wire mesh netting 25 gauge 20mm meshing and plaster of paris 3 to 5mm thick all around the mesh after breaking old unsv/broken lagging for the 25mm GI tubing all as specified and directed by Engineer-in-Charge |
| 6 | Material and Labour for Lagging to pipes used in external water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAPON’ pipe sections of density 144 Kg/cum conforming to IS 9842nor equivalent and provided chicken wire mesh netting 25 gauge 20mm meshing and plaster of paris 3 to 5mm thick all around the mesh after breaking old unsv/broken lagging for the 15mm GI tubing all as specified and directed by Engineer-in-Charge |
| 7 | Taking up or down GI steel tubing 15mm bore and connection including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.Note: if Excavation required , Excavation and earth work shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 8 | Taking up or down GI steel tubing 20mm bore and connection including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.Note: if Excavation required , Excavation and earth work shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 9 | Taking up or down GI steel tubing 25/32mm bore and connection including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.Note: if Excavation required , Excavation and earth work shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 10 | Taking up or down GI steel tubing 40/50mm bore and connection complete all as specified and directed by Engineer-in-Charge.Note: if Excavation required , Excavation and earth work shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 11 | Refixing old of size 15mm bore GI/steel tubing and connection in new or old positionafter cleaning of surfaces complete all as specified and directed by Engineer-in-Charge.Note:-Old serviceable pipes for refixing shall be retrived from item no 7 of BOQ (b) The rate of Cleaning of pipe surfaces is included in this item and nothing shall be paid extra on the ground. |
| 12 | Refixing old of size 20mm bore GI/steel tubing and connection in new or old positionafter cleaning of surfaces complete all as specified and directed by Engineer-in-Charge.Note:-Old serviceable pipes for refixing shall be retrived from item no8 of BOQ (b) The rate of Cleaning of pipe surfaces is included in this item and nothing shall be paid extra on the ground. |
| 13 | Refixing old of size 25/32mm bore GI/steel tubing and connection in new or old positionafter cleaning of surfaces complete all as specified and directed by Engineer-in-Charge.Note:-Old serviceable pipes for refixing shall be retrived from item no 9 of BOQ (b) The rate of Cleaning of pipe surfaces is included in this item and nothing shall be paid extra on the ground. |
| 14 | Refixing old of size 40/50mm bore GI/steel tubing and connection in new or old positionafter cleaning of surfaces complete all as specified and directed by Engineer-in-Charge.Note:-Old serviceable pipes for refixing shall be retrived from item no 10 of BOQ (b) The rate of Cleaning of pipe surfaces is included in this item and nothing shall be paid extra on the ground. |
| 15 | Material and Labour for Cutting ,drilling and tapping of CI / GI water mains (in position) in size for branch connection of the internal dia 15mm including excavation earthwork refilling,leakage testing & fixing accessory etc complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and Labour for Cutting ,drilling and tapping of CI / GI water mains (in position) in size for branch connection of the internal dia 20mm including excavation earthwork refilling,leakage testing & fixing accessory etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and Labour for Cutting ,drilling and tapping of CI / GI water mains (in position) in size for branch connection of the internal dia 40mm including excavation earthwork refilling,leakage testing & fixing accessory etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and laying in replacement of old damaged /rusted GI tubes medium grade of 100 mm dia complete with all new fittings(like union,tee,bend,elbow,reducer,socket,flanged,6mm gasket) to be fixed on wall and ceilings or laid in floors /trenches complete all as specified and directed by Engineer-in-Charge.Notes:-(a) Welding for flanged is deemed to be included in this rate.(b) If the pipe is laid in trenches earthwork shall be measured and paid separately under appropriate item of Schedule ‘A’ Boq. |
| 19 | All as per item No. 18 here-in- before but of size of 80 mm bore complete all as specified and directed by Engineer-in-Charge. Notes:-(a) Welding for flanged is deemed to be included in this rate.(b) If the pipe is laid in trenches earthwork shall be measured and paid separately under appropriate item of Schedule ‘A’ Boq. |
| 20 | All as per item No. 18 here-in- before but of size of 50 mm bore complete all as specified and directed by Engineer-in-Charge.Notes:-(a) Welding for flanged is deemed to be included in this rate.(b) If the pipe is laid in trenches earthwork shall be measured and paid separately under appropriate item of Schedule ‘A’ Boq. |
| 21 | All as per item No. 18 here-in- before but of size of 40 mm bore complete all as specified and directed by Engineer-in-Charge.Notes:-(a) Welding for flanged is deemed to be included in this rate.(b) If the pipe is laid in trenches earthwork shall be measured and paid separately under appropriate item of Schedule ‘A’ Boq. |
| 22 | All as per item No. 18 here-in- before but of size of 25 mm bore complete all as specified and directed by Engineer-in-Charge.Notes:-(a) Welding for flanged is deemed to be included in this rate.(b) If the pipe is laid in trenches earthwork shall be measured and paid separately under appropriate item of Schedule ‘A’ Boq. |
| 23 | All as per item No. 18 here-in- before but of size of 20 mm bore complete all as specified and directed by Engineer-in-Charge.Notes:-(a) Welding for flanged is deemed to be included in this rate.(b) If the pipe is laid in trenches earthwork shall be measured and paid separately under appropriate item of Schedule ‘A’ Boq. |
| 24 | All as per item No. 18 here-in- before but of size of 15 mm bore complete all as specified and directed by Engineer-in-Charge.Notes:-(a) Welding for flanged is deemed to be included in this rate.(b) If the pipe is laid in trenches earthwork shall be measured and paid separately under appropriate item of Schedule ‘A’ Boq. |
| 25 | Material & Labour for replacement of Cast Iron fitting such as bends, tappers any type tee, caps reducer ,collar and plug upto 150 mm bore complete all as specified and directed by Engineer-in-Charge |
| 26 | Supply & Fixing in replacement of old damaged Cast Iron pipes of size 100 mm bore spigot and socket ends centrifugally cast. Class A in any length with gasket, laid in trenches complete all as specified and directed by Engineer-in-Charge.Note: Excavation and earth work shall be measured and paid seperately. |
| 27 | Supply & Fixing in replacement of old damaged Cast Iron pipes of size 80 mm bore spigot and socket ends centrifugally cast. Class A in any length with gasket, laid in trenches complete all as specified and directed by Engineer-in-Charge.Note: Excavation and earth work shall be measured and paid seperately. |
| 28 | Supply & Fixing in replacement of old damaged / unserviceable Gun metal globe or gate valve non rising spindle heavy duty with iron wheel head, screwed both end for connection GI pipes of size of 80mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 29 | All as per item No. 28 here-in- before but of size of 50mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 30 | All as per item No. 28 here-in- before but of size of 40mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 31 | All as per item No. 28 here-in- before but of size of 25mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 32 | All as per item No. 28 here-in- before but of size of 20mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 33 | All as per item No. 28 here-in- before but of size of 15mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fixing in replacement of GI union of size of 15 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 35 | All as per item No. 34 here-in- before but of size of 20 mm bore (ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 36 | All as per item No. 34 here-in- before but of size of 25 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 37 | All as per item No. 34 here-in- before but of size of 40 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 38 | All as per item No. 34 here-in- before but of size of 50 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and fixing in replacement GI elbow of size of 15 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 40 | All as per item No. 39 here-in-before but of size of 20 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 41 | All as per item No. 39 here-in-before but of size of 25 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 42 | All as per item No. 39 here-in-before but of size of 40mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 43 | All as per item No. 39 here-in-before but of size of 50 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fixing in replacement of GI Tee of size of 15 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 45 | All as per item No. 44 here-in- before but of size of 20 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 46 | All as per item No. 44 here-in- before but of size of 25 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 47 | All as per item No. 44 here-in- before but of size of 40 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 48 | All as per item No. 44 here-in- before but of size of 50 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing in replacement of GI Socket of size of 15 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 50 | All as per item No.49 here-in-before but of size of 20mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 51 | All as per item No.49 here-in-before but of size of 25 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 52 | All as per item No.49 here-in-before but of size of 40 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 53 | All as per item No.49 here-in-before but of size of 50 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixing in replacement of GI Nipple of size of 15 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 55 | All as per item No. 54 here-in- before but of size of 20 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 56 | All as per item No. 54 here-in- before but of size of 25 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 57 | All as per item No. 54 here-in- before but of size of 40mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 58 | All as per item No. 54 here-in- before but of size of 50 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixing in replacement of GI Flange with 6mm gasket of size of 40 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 60 | All as per item No. 59 here-in- before but of size of 50 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 61 | All as per item No. 59 here-in- before but of size of 80 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 62 | All as per item No. 59 here-in- before but of size of 100mm bore complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply only Calcium based granular disinfectant for water treatment more stable than chlorine gas, and stronger than Bleaching powder and sodium Hypochlorite pack of 45 Kg plastic drum complete all as specified and directed by Engineer-in-Charge. Note: Drum packing shall be 45 kg for payment and measurement purpose. |
| 64 | Supply and fixing in replacement cast iron non return valve of 100 mm bore , PN 1.6, both ends flanged , ISI Marked, jointed and testing complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fixing in replacement cast iron non return valve of 80mm bore , PN 1.6, both ends flanged , ISI Marked, jointed and testing complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing in replacement Sluice valve of 100 mm bore Cast lron body PN 1.0 (ISI marked) with brass spindle, iron wheel head type connecting and testing complete complete all as specified and directed by EIC. |
| 67 | Supply and fixing in replacement Sluice valve of 80 mm bore Cast lron body PN 1.0 (ISI marked) with brass spindle, iron wheel head type connecting and testing complete complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
| 68 | Supply and fixing in replacement Sluice valve of 80 mm bore Cast lron body PN 1.0 (ISI marked) with brass spindle, iron wheel head type connecting and testing complete complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender