Tender For Misc Repairs To Drainage, Compound Wall, Grills, Gratings, Footpath, Hardstanding, Paver Block And Other Petty Repairs At Vijay Baugh Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram.
Tender Value
42 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Repairs To Drainage, Compound Wall, Grills, Gratings, Footpath, Hardstanding, Paver Block And Other Petty Repairs At Vijay Baugh Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. |
| 2 | Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed. |
| 3 | M&L Pre-cast cement concrete block masonry Type C1 1:3:6 ( 20 mm Graded aggregate ) Set in CM 1:6 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed. |
| 4 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge. |
| 5 | Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out hard/dense soil, returning filling in and ramming earth or Brocken rubble mixed with earth around, in layers not exceeding 25 cm |
| 6 | M&L for cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) for post, struts (including caps) including weathering, slightly rounded or chamfered angles and throating and including necessary form work all as specified and directed |
| 7 | Supply & fabricate and fixing in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)). |
| 8 | Supply and fixing PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm including taking down old fencing all as specified and as directed . |
| 9 | S & F in repairs 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel paint over a coat of red oxide |
| 10 | M & L for Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends each screw-wed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long diameter of neck in exc 16mm and n.exc 20 mm |
| 11 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping |
| 12 | Taking down cement plaster in patches on brick/stone masonry wall incl raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.. |
| 13 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified. |
| 14 | M&L for preparation on newly plastered wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). |
| 15 | M&L for rendering 15 mm thick cement plaster in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified. |
| 16 | Supply and fix in repairs aluminium composite panel sheet of 4 mm thick with 0.5 mm thick aluminium sheet both sides as in cupboards,wall cladding and false ceiling fixed on aluminium frame works with plastic strips (Double sided sticker ) of suitable size of varying thickness of 10mm to 30mm applying adhesive over and including aluminium frame work having panels not exc 1200x1200mm for fixing composite panel with screws .The joints in panels shall be filled with weather proof sealant,the board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and directed. |
| 17 | S&F in repairs Framed work such as ornamental and intricate design Gate, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; amework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 18 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed. |
| 19 | Dismantling structural steel work complete all as specified. |
| 20 | M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe-410 (grde E-165) |
| 21 | S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 22 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). |
| 23 | Providing and fixing corrugated/ribbed PVC roofing sheets of approved make, profile, colour and shade over existing roof after dismantling and removing the existing roof covering, comprising 12 mm thick BWP/BWR grade plywood lining fixed to the existing roof supporting members with suitable wood screws/nails, and corrugated/ribbed PVC roofing sheets fixed over the plywood with approved self-drilling/self-tapping screws complete with EPDM/neoprene/bitumen washers and caps to ensure watertight fixing, including providing side and end overlaps as per manufacturer's specifications, matching PVC ridge pieces, flashings and joint treatment, cutting sheets to required size and shape, making holes/openings for pipes, vents or other services, sealing all joints, making good disturbed portions and ensuring complete watertight installation, including all labour, materials, scaffolding, lifting, handling, tools and tackles, transportation, loading/unloading and all incidental works complete, all as specified and as directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for Railings/Gates. |
| 25 | Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 sqm each complete all as specified. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 28 | S&F Aluminum anodized barrel bolt of extruded section 150mm long complete. |
| 29 | S&F extruded aluminum alloy handle fabricated type anodized 150 mm long complete. |
| 30 | S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete. |
| 31 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed.NOTE:- All joint should be filled with sealant & The rates are inclusive of Demolition of existing Cupboards |
| 32 | Demolition of Reinforced manhole, Drain over cover slabs in similar works etc complete all as specified |
| 33 | M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover slab set in cm 1:6 all as specified and directed |
| 34 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars. |
| 35 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 36 | M&L for cement concrete1:2:4 Type B-1 Using 20mm graded stone aggregate as in surface channels or drain |
| 37 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping in lintels upto 1.5m clear span, cills, steps; seismic and other similar ands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water roughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 38 | M&L for Excavation in trenches n.exc. 1.5 wide and n.exc. 1.5 m deep and getting out in any type of soil |
| 39 | Returning, filling in soil incl levelling watering and well ramming in layers n.exc .25cm in fdn trenches. |
| 40 | Removing excavated soil to a dist n.exc 50m and depositing where directed at a level n.exc.1.50m |
| 41 | M&L for Forming fair finished drain using extra cement. |
| 42 | M&L for rough finished machine pressed precast concrete interlocking paver block of size 200x200 of square shape of black and grey colour in combination and with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness, M-40 Grade laid dry to any pattern or profile as directed incl filing to the edges in CM 1:4 all manufacturer's instruction incl dismantling interlocking tiles complete all as specified and directed |
| 43 | M&L for sand filling under floors or in foundation including watering and consolidation incl spreading and levelling |
| 44 | S & F in repairs stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender