Tender For Misc Repairs To Footpath, Hardstanding, Paver Blocks And Other Petty Repairs At Nsry, Navcc, Cdu And Mes Colony Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
Tender Value
39 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Repairs To Footpath, Hardstanding, Paver Blocks And Other Petty Repairs At Nsry, Navcc, Cdu And Mes Colony Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified |
| 4 | Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out in any type of soil and returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed. |
| 5 | M&L for cement concrete Type C-2, 1:3:6 (using 20 mm graded stone aggregate) in post foundation, foundation and mass concrete all as specified and directed |
| 6 | Dismantling structural steel work of any description complete all as specified. |
| 7 | S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 8 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins, pole where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using structural steel of Fe-410W (Gde E-250 quality A) complete all as specified and as directed. |
| 9 | S & F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed. |
| 10 | S&F in repairs aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specified and directed |
| 11 | S & F in repairs 1.25mm thick steel rolling shutters , with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, gear operated type with chain wheel and hand chain complete all as specified and directed. |
| 12 | S&F in repairs safety level locks mild steel with 4 levers for rolling shutter all as specified and directed |
| 13 | Supply in repairs Ball bearing for rolling shutters etc complete all as specified and as directed |
| 14 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, etc completed all as specified and as directed. |
| 15 | M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint over one coat of red oxide primer all as directed. |
| 16 | Taking down cement plaster in patches on brick/stone masonry wall incl raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.. |
| 17 | M&L for rendering 15mm thick in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement, etc completed all as specified and as directed. |
| 18 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified |
| 19 | M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed. |
| 20 | M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard), etc completed all as specified and as directed. |
| 21 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 22 | Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed |
| 23 | M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stoneaggregate), exc. 10cm in width, set in CM 1:6 all as specified |
| 24 | M&L for broken stone or boulders hard core of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface complete all as specified and directed |
| 25 | M & L for providing 75 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors all as specified and as directed. |
| 26 | M& L for plain cement concrete type A-1 (1:1.5:3) (Using 20 mm graded stone aggregate) as in hard standing finished with even and smooth with using extra cement including use and waste form work complete all as specified and directed. |
| 27 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' complete all as specified and directed. |
| 28 | Finishing surface to concrete roads, pavements, by brooming complete all as specified and directed. |
| 29 | S&F for glossy finished cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed |
| 30 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 CM, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including dismantling of old kerb stone complete all as specified and directed. |
| 31 | M&L for glossy finished machine pressed precast concrete interlocking paver block glossy finished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness, M-40 Grade laid dry to any pattern or profile as directed incl filing to the edges in CM 1:4 all manufacturer's instruction complete all as specified and directed |
| 32 | M&L for sand filling under floors or in foundation including watering and consolidation incl spreading and levelling complete all as specified and directed |
| 33 | M & L for preparation of old concrete/PCC block surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint with yellow / black pattern complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender